Tpower I45 and 2 X HD4870 gives Aquamark WR to ATI (updated to 362604marks)

[Pt1t]

A Picture of the Bench Setup



Setup :

Mobo : Biostar Tpower I45 (no mod)
NB cooling : 120mm fan ^^
CPU : Intel core 2 Duo E8600
CPU Cooling : 2 Stages Cascade (-103°)
RAM : 2*1go Crucial Ballistix tracer PC8500
VGA : 2*HD4870 Jetway
VGA cooling : Stock
PSU : Gigabyte Odin 1200w

AQUAMARK : 353760 marks




BIOS SETUP (0710)

O.N.E
Over-Clocking Navigator (Manual OverClock)
Intel(R) SpeedStep(tm) : Disabled
Ratio CMOS Setting : ×6
CPU Frequency Setting : 600
Over Clock Retry Count : 1
FSB Finetune : Enable
FSB(Bsel) To NorthBridge Latch : 1333
DRAM Frequency : DDR2-1200
DDR2 Enhance Mode : Disabled
DRAM Timing Configuration
DDR2 RCOMP Configuration : 4
Static tREAD Value : PL10
Configure DRAM Timing by SPD : Disabled (4-4-4-12)
Clock Gen Configuration
PCIE Frequency Setting : 100
CPU Clock Skew Control : 200ps
(G)MCH Clock Skew Control : Auto
CPU Clock Driving Control : Auto
Voltage Configuration
CPU Voltage : +0.65v (1.85 idle / 1.81v Load)
DDR Voltage : +0.600v
Chipset Voltage : +0.35v
FSB Voltage : +0.35v
CPU Core1 GTL Ref Voltage : 0.63*VTT
CPU Core2 GTL Ref Voltage : 0.67*VTT
MCH GTL Ref Voltage : Auto
CPU PLL Voltage : 1.5v