DFI LANparty DK P45-T2RS/T3RS / Plus(Intel P45)
Content of the thread
- General informations
- Impressions
- Specifications
- The bios
- Downloads
- Important Informations
- Results
- compatible memory & coolers
- Important links
General informations
After the P35 Board of the DK-Family, the P45 Boards is now available and this is the official thread for the board. I have this board at home and i will give you results und screens. This thread isn't final.
So guys, buy this board and test it
Impressions
(Bilder von patrock84 und meiner Wenigkeit)
Specifications
- CPU
- LGA 775 socket for:
- Intel® Core2 Quad and Intel® Core2 Duo - Supports Intel Enhanced Memory 64 Technology (EMT64T)
- Supports Enhanced Intel SpeedStep Technology (EIST)
- Supports Intel Hyper-Threading Technology
- Supports 1333/1066/800MHz FSB
- Supports Enhanced Intel SpeedStep Technology (EIST)
- Intel® chipset
- Intel® chipset
- Northbridge:
Intel® P45 Express chipset
Intel® Fast Memory Access technology
- Southbridge: Intel® ICH10R
- Memory
- Four 240-pin DDR2 DIMM sockets
- Supports DDR2 667/800 MHz
- Delivers up to 12.8Gb/s bandwidth
- Supports dual channel (128-bit wide) memory interface
- Supports up to 8GB system memory
- Supports unbuffered x8 and x16 DIMMs
- Expansion Slots
- 2 PCI Express (Gen 2) x16 slots - 2-way CrossFire: One slot operating at x16 (16-lane port) or two slots each operating at x8 (8-lane ports) bandwidth
- 2 PCI Express x1 slots
- 2 PCI slots
- BIOS
- Award BIOS
- 8Mbit SPI flash BIOS
- CMOS Reloaded
- Audio
- Realtek ALC885 High Definition audio CODEC
- 8-channel audio output
- DAC SNR/ADC SNR of 106dB/101dB
- Full-rate lossless content protection technology
- Optical S/PDIF-out and coaxial RCA S/PDIF-out interfaces
- LAN
- Marvell 88E8053 PCIE Gigabit LAN controller
- Fully compliant to IEEE 802.3 (10BASE-T), 802.3u (100BASE-TX) and 802.3ab (1000BASE-T) standards
- IDE
- JMicron JMB368 PCI Express to PATA host controller
- Supports up to 2 UltraDMA 33/66/100Mbps IDE devices
- Serial ATA with RAID
- Intel Matrix Storage technology
- Supports up to 6 SATA devices
- SATA speed up to 3Gb/s
- RAID 0, RAID 1, RAID 0+1 and RAID 5
- Rear Panel I/O Ports
- 1 mini-DIN-6 PS/2 mouse port
- 1 mini-DIN-6 PS/2 keyboard port
- 1 optical S/PDIF-out port
- 1 coaxial RCA S/PDIF-out port
- 6 USB 2.0/1.1 ports
- 1 RJ45 LAN port
- Center/subwoofer, rear R/L and side R/L jacks
- Line-in, line-out (front R/L) and mic-in jacks
- Power Management
- ACPI and OS Directed Power Management
- ACPI STR (Suspend to RAM) function
- Wake-On-PS/2 Keyboard/Mouse
- Wake-On-USB Keyboard/Mouse
- Wake-On-LAN
- Wake-On-Ring
- RTC timer to power-on the system
- AC power failure recovery
- Hardware Monitor
- Monitors CPU/system/Northbridge temperature and overheat alarm
- Monitors Vcore/Vdimm/Vnb/VCC5/12V/V5sb/Vbat voltages
- Monitors the speed of the cooling fans
- CPU Overheat Protection function monitors CPU temperature and fan during system boot-up - automatic shutdown upon system overheat
- PCB
- 4 layers, ATX form factor
- 24.5cm (9.64") x 30.5cm (12")
The bios - !press F9 for more settings!
Important nformations
Zum Non-Plus:
The nonplus version is not as good as the plus version vor overclocking. If you want to buy the DFI, then buy the plus version. Most of the overclocking results are reached on the plus version.
F9 for more memorysettings in bios
Zum DFI DK
Plus:
p45 normal and p45 plus both have chipset A2 revision and A1 motherboard revision as of NOW. Difference between the normal and the plus is the additional 2 SATA ports and also the double boot after saving bios has been resolved for the P45 plus.
- Crucial Ballistix Tracer PC8500 1066MHz BL12864AL1065.8FE5
- takeMS Mach2 2GB PC2-8500U CL5-5-5-18 TMS1GB264C082-105EP
- Corsair XMS2 Dominator 2GB PC2-8500U CL5-5-5-15 TWIN2X2048-8500C5D
- OCZ Reaper HPC Edition Kit 2GB PC2-9200U CL5-5-5-18 OCZ2RPR11502GK
- OCZ Reaper HPC Edition 2GB Kit PC2-9600 CL5-5-5-18 OCZ2RPR12002GK
- OCZ Flex II 4GB Kit PC2-9200 CL5-5-5-18 OCZ2FXT11504GK
- TeamGroup Xtreem Dark 4GB Kit PC2-8500U CL5-5-5-15 TXDD4096M1066HC5DC-D
- Chaintech Apogee GT DIMM Kit 4GB PC2-8500U CL5-5-5-15
- Kingston HyperX DIMM Kit 4GB PC2-6400U CL5-5-5-15 (DDR2-800) (KHX6400D2K2/4G)
- Cellshock DIMM Kit 2GB PC2-8500U CL5-5-5-15 (DDR2-1066) (CS2221550)
- G.Skill Kit 4GB PC2-8000U CL5-5-5-15 (DDR2-1000) (F2-8000CL5D-4GBPQ)
- G.Skill Kit 4GB PC2-8800U CL5-5-5-15 (DDR2-1100) (F2-8800CL5D-4GBPI)
- G.Skill Kit 4GB PC2-6400U CL5-5-5-15 (DDR2-800) (F2-6400CL5D-4GBPQ)
- Chaintech Apogee GT Kit 4GB PC2-9200U CL5-5-5-15
- Crucial Ballistix Tracer PC6400 2*1 GB BL12864AL804.16FD3
Important Information
vDroop-Mod
Here the vDroop-Mod. I made it with 20 kOhm VR. I think 10 kOhm should be work too.
Results:
Without Mod, R = 2,22 kOhm: 1,395 V / 1,385 V
With Mod, R = 1,37 kOhm: 1,400 V / 1,395 V (The poti is set at ca. 4 kOhm)
Measurepoints DFI LANparty DK P45-T2RS / Plus
Messgerät : Voltcraft VC-531 Ampere Zange + Multimeter ( NP : 75 € )
Real Volt - Messung at Windows @ IDLE....with a Q9550 E0 @ FSB 500 @ 4255 Mhz
--------------------------------------------------------------------------
CPU PLL ( Bios 1.55v.) ......Real : 1.578v...........Droop : + ~ 0.03v.
NB Core ( Bios 1.420v.) .....Real : 1.420v...........Droop : nichts
VDIMM ( Bios 2.218v. ) .....Real : 2.245v. .........Droop : + ~ 0.03v.
VTT ( Bios 1.280v. ) .......Real : 1.298v. ..........Droop : + ~ 0.02v.
--------------------------------------------------------------------------
Heatpipe Mod :
Originally Posted by Fresh_Thing
Reply With Quote
Bookmarks