Biostar Tpower I45 , +600mhz FSB easy

[cstkl1]

This is a reply from biostar

i find it as a big issue but .. they practically said not really for them..
well up to u guys..

email to biostar fae carter@biostar.com.tw

my question

1. FSB voltage set in bios will never be lower than NB voltage. Example

Set NB to +0.1
Set FSB voltage to +0.025
Will result in

NB voltage 1.196
FSB voltage to 1.216.. ( see the issue here) Suppose to be 1.12 and not
1.216

only can be adjusted via TPower 2 utility


His reply

after whole tested, we check that
the system is more stable and tunable under FSB voltage higher than NB voltage
that the reason FSB Voltage is always higher than NB Voltage.

so whats the point even in having a voltage adjustment in the fsb.
since its always going to be sky high

also this is not possible then since its ideal for 500fsb c2d




the reason i posted the everest score..

biostar has this function called ddr2 rcomp configuration
how it does it what i am going to tell i have no clue
but it will reduce read and copy of the above reading to 7k/5k with latencies to 60+.. thats how u can clock up to 600fsb easy...with a tRD readings very low..
so this board on high fsb clocks.. has no gain in mem.. for my testing compared to asus p5q which has higher tRD's but atleast respectable bandwidth scores..

i rate this board 5/5 for cpuz posting of 600fsb
other than that its rubbish.. compared to asus p5q