theYipster,

I checked my voltage and here are the results.
VID: 1.256v - Read from BIOS, EIST disabled Q6600@2.4GHz stock
Vcore(no load): 1.432v - Read from CPU-Z, EIST disabled Q6600@3.4GHz
Vcore(load): 1.376v - Read from CPU-Z, EIST disabled, Q6600@3.4GHz

Load was Prime95 v25.5, 4 threads, small FFT.

You can see that my voltage drop under load is 0.056v or 3.9%. Is that inline with your observations?

I'm going to push the Vcore up and see if I can drop back the terminator voltage. I'll keep the FSB at 1512Mz for now.