MMM
Results 1 to 25 of 198

Thread: Getting RAID to work on the ASUS Maximus SE

Threaded View

  1. #11
    Xtreme Mentor
    Join Date
    Sep 2007
    Location
    Ohio
    Posts
    2,977
    The system hangs the most consistantly trying to post at DET DRAM, on the LCD poster.

    I am only runing stock speed on the CPU, Idont know how to OC yet. The drives were only initialized using Vista32 as a regular old format drive. No RAID. I then used a program called Wipedrive I baught, to make my install go smoother...

    I had heard Raptors do better on a fresh install if they were pre-initialized, and 0's written on them using Wipedrive.

    I have not seen the hardware monitor section in the BIOS yet. The next lucky boot when my system allowes me access to the BIOS, I will look.

    I will run memtest as soon as I figure out how to get it over to the system, and be able to see it in a directory.

    Mabey I should take some ram back out? This waiting 10 of 15 minutes with the system off, to get the BIOS to work is driving me batty.
    Last edited by Talonman; 01-27-2008 at 08:36 AM.
    Asus Maximus SE X38 / Lapped Q6600 G0 @ 3.8GHz (L726B397 stock VID=1.224) / 7 Ultimate x64 /EVGA GTX 295 C=650 S=1512 M=1188 (Graphics)/ EVGA GTX 280 C=756 S=1512 M=1296 (PhysX)/ G.SKILL 8GB (4 x 2GB) SDRAM DDR2 1000 (PC2 8000) / Gateway FPD2485W (1920 x 1200 res) / Toughpower 1,000-Watt modular PSU / SilverStone TJ-09 BW / (2) 150 GB Raptor's RAID-0 / (1) Western Digital Caviar 750 GB / LG GGC-H20L (CD, DVD, HD-DVD, and BlueRay Drive) / WaterKegIII Xtreme / D-TEK FuZion CPU, EVGA Hydro Copper 16 GPU, and EK NB S-MAX Acetal Waterblocks / Enzotech Forged Copper CNB-S1L (South Bridge heat sink)

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •