Getting RAID to work on the ASUS Maximus SE

[Wolf2000me]

Brilliant, another dillema solved, and you did it all by yourself... SATA 1 & 2 may have been the secret for raid, but yeah, you may want to back down your OC if there's more probs. And if your still waiting on a Case, i would recomend the Antec 900, but that's full of air, you want to go water.

Don't forget, you can run External E-SATA straight off the SATA on board, if you want to keep some airflow thro from the front fans, 4 HD is enough there, i got the E-Sata connected to 5 & 6 Ports, working very stable.

Guess i'm being carefull at only 3GHz CPU, temps at load 55 C -NB and 45 C -CPU, so there's room for temps, i will push it up this later as i get organised and things prove to be alright.

Also Wolfy, Wouldn't mind to know your final OC changes when you get things set up with suitable RAM and yo water slushing thro.... cool.

Not so brilliant after all...
It did happen again when I ran a standard 30 min OCCT test. This time the RAID BIOS reported an error on one of the drives, again the same drive. So maybe that drive is about to go to the eternal disk lands. I just ordered 2 raptors which I'm going to pick up after work. I'll know at least of one variable out of the equasion.
The case I ordered was lost in transit so that's why I still don't have it, along with my watercooling gear. It's going to arrive today, or someone is going to get a very annoyed me on the line.
I ordered a Thermalright Mozart case. Plenty of room to store the dual rad along with all the rest.

Cheers

edit: Of course I will post my oc results. At this point I'm at 388x9. I set 1.33v vcore in the bios but my monitoring tools report 1.24v. I'm also still at bios version 0505.