Quote Originally Posted by scaryogre View Post
Hi Guys,

Just got my system built...but am having a hard time trying to figure out how to do the following:

CONFIG: (3) 320GB Hard Drives SATA
GOAL: Setup a RAID 1 config with WinXP Pro SP2 using 2 of the drives. 3rd drive will be for non-critical data (stand-alone).

PROBLEMS:

1. I have no floppy drive. Even if I did, all the drivers are on the CDROM included with the mobo so installing the RAID controller drivers during setup is not doable.

2. In order to get WinXP installed can I set the BIOS SATA controller in IDE mode to get WinXP installed on one of the drives and then change it to RAID mode afterwards without destroying my data on the install drive?

3. Or should I use Intel Matrix Storage Manager to setup the RAID?

4. If none of the above will work how do I get the drivers to install during WinXP setup? I know I can press F6 to install drivers, but I don't have them on a floppy as I stated.

A simple step-by-step on how to install WinXP Pro without the Intel RAID drivers would be GREATLY appreciated!!! Thanks!!!

Thanks for any help!

-scaryogre
You're sure going through a bunch of crap to save the price of a floppy drive... $5.99