is 12.b03 the latest beta for this board?
Yes but I wouldn't recommend it

Luck with build

From [URL="http://www.clunk.org.uk/forums/4776-post181.html"]M704B_12.B03 Initial Feedback
/URL] for those with browser issues

1) Bench Comparison
Results show slower performance
....Everest PI32 Pi1M
.....Read
03 8642.....14m.42 14.266
02 8830.....14m.15 14.219

Pi & Everest Benches 12.B03


Pi & Everest Benches 12.B02


2)Vcore
On several occasions a selected vcore in this case 1.40v has been set back to the auto 1.265v value.
3) Vdimm overvolt.
1st notived this due to Guru alarm in xp

There are really 2 issues here:-
3-1) The alarm value in vdimm is 2.2v which seems a bit low as some performance ram will go up to 2.4v
3-2) I had set vdimm to 2.175 as shown in the vcore shot.
Both Guru XP & Guru Bios

show it overvolting to 2.20v. As i've said elswhere i've been able to run comfortably around 1080 at 2.175v as on load the board over volts a further .04v see Multimeter tests

So so far nothing particularly worthwhile. Have flashed back to 12.B02 if anyone wants something particular testing i'll try it, but otherwise I'll not be using it.