Just got my new SLACR processor... G0 stepping and all

Installed.. cleared.... boots fine...

2.4GHz.. all flawless..

Overclocking... I can't get past 2500MHz for this CPU.. no matter the voltage...

Previous settings

E6600 @ 3.6 normally 3.9@ 1.55v and 3.8max stable. Max temps where 58C with a 28C ambient or so...
PQI 800MHz 4GB @ 2.1v
BFG 680i reference board
Dtek Fuzion MCR320 MCP655 pump.
Vista X64 Rock solid with the E
As you can see.. a good overclock overall...

with the q6600 G0 i simply cannot get it to overclock.. System hangs.. reboots.. BSOD, boots and/or drivers do not load.

In the end.. I can only boot at STOCK MHz.

My goal is to achieve the 3.6GHz and it looks to be VERY VERY possible...

Now .. do i have a REALLY bad chip that simply CAN't OVERCLOCK?
I have tried bios P26,P27,P28 and P30 with the same results...

Any help is appreciated.