My TJ07 and mods..with special thanks to AndyM

[nealh]

Ok....please go easy on me...I suck at modding cases...There are plenty of marks around

Now I need to thank several people for the guidance and help
Ladderman
Sideroxylon
Maxxracer

and a HUGE thanks to AndyM

I attempted best I could to imitate ladderman and AndyM....my cable management is at best fair...sorry guys

I will note I am no handy guy..I used a dremel for everthing and I will say it was a pain in the ass....the mobo trat was very hard to cut as was the rear part of the mobo tray holder to make a slot for cable

One really needs better tools than a dremel...and better skills..LOL

I cut the upper/lower chamber divider in 2 places(this turned out to be an error of hindsight..only needed one)...I do this so I can remove the entire loop in total

I used Lian Li wheels(ala Ladderman) and dvd stealth covers(inspired by AndyM)

I am proud of my work as I did more to this case than my P180...

I also purchased the Silverstone 5.25 HDD cage...this really affect the ability to hide the sata data cables and power cords for the DVDRW and HDDs

My hardware:
e6600 L629F @3600 1.4v
Badaxe2 rev 505 bios 2747
x1900xt CF-single card, run 675/800 in 3D only
X-Fi extreme music
2 dvdrw...Samsung SH-203B and Liteon LH-201AL
2 HDD..Seagate 320gb 7200.10 and 200gb 7200.8
Sunbeam fan controller on front(rad and HDD fans) and hidden fan controller in the case(this is for my 2 x 92mm Nexus and 2 x 120 top silverstone fans)
eSata bracket
Corsair 620W PSU

WCing:
Fuzion block with TR backplate w/ MX-1
MCW60 and MC14 ram sinks
DDC2 with DDCT-01s
PA120.3 with 3 YL in push and 2 Silverstone 120 as pull(from HDD cage with the case..very quiet...)
Masterkleer 7/16in
EK and DD high flow barbs
worm drives....
coolant..distilled H20 and Petra's additive that he gave a beta product last yr)

I remounted the Fuzion with new application of MX-1(I maybe using too much??)...temps still do not look good idle actually went up 1C