Stepping Out With The E6750 + P5K Deluxe

[msgclb]

• Intel Core 2 Duo E6750 (G0) - L719A747
• Asus P5K Deluxe 0311 BIOS
• 2x1GB Crucial Ballistix PC2-8500 in black slots
• Water cooled

The following are the basic settings used with all my tests.

Settings Used:

JumperFree Configuration Settings
AI Overclocking: Manual
CPU Ratio Control: Manual
- Ratio CMOS Setting: 8
FSB Frequency: 333
PCI-E Frequency: 100
DRAM Frequency: DDR2-667
DRAM Command Rate: 2T
DRAM Timing Control: Manual
CAS# Latency: 5
RAS# to CAS# Delay: 5
RAS# Precharge: 5
RAS# Activate to Precharge: 15
TWR: 8
TRFC: 30
TWTR: 8
TRRD: 8
TRTP: 8
DRAM Static Read Control: AUTO

Transaction Booster: AUTO
Boost Level: N/A
Clock Over-Charging Mode: AUTO

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled

CPU Voltage: 1.35
CPU Voltage Reference: AUTO
CPU Voltage Damper: Enabled
CPU PLL Voltage: 1.50
DRAM Voltage: 2.20
FSB Termination Voltage: 1.20
North Bridge Voltage: 1.25
North Bridge Voltage Reference: AUTO
South Bridge Voltage: 1.05

Advance CPU Settings
CPU Ratio Control: Manual
- Ratio CMOS Setting: 8
C1E Support: Disabled
Max CPUID Value Limit: Disabled
Vanderpool Technology: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
PECI: Enabled

USB Configuration
USB Functions: Enabled
Legacy USB Support: Disabled (enable it to detect USB flash drives)

Ambient temperature ~24c to 25c

2671MHz - 333FSB x8 1:1

CPU - Idle


CPU - Load


Everest Ultimate 4.10.1076 Beta Build - Super Pi 32M


Now that I've confirmed the stock settings work I'll move on.