Quote Originally Posted by SikaRippa View Post
Ok.. if you really want to test I calculated resistor values (using the equation shown in the guide) and get following values:

~ 9000 ohm -> 2.5 V
~ 16000 ohm -> 2.6 V
~ 60000 ohm -> 2.7 V

.. but I suggest to put potentiometer/fixed resistor (high value) in series and adjust & measure voltage in the same time !! Good luck and be careful

So i put in a ~ 27 kOhms resistor, so memvolt should be about 2,62-2,65V now. The good news is that the whole thing didn't blow up , all is working normally, 3D too... The other news is that, well, I have to wait and see if BS happens again, I can not be sure about the effectiveness of the mod.