FWIW:
on my mobo...I had 0.1 overvolting on my vdimm(set 2.0v and measured 2.01v)
gtj..thanks..I d/led that driver and decided to try tonight using it...but to hear that hot plugging is not working seems to defeat eSATA IMHO
I was able to run P95v251 last night ...blend for 25hr
nothing real impressive..e6600 390x9=3500 1:1 crucial 10th anniv DDR 780 at 2.0v w/4-4-4-12...vcore was 1.525v with powerslope/ and I think vfsb at 1.375 and vmch 1.6....(I will try to lower these some as well as vcore with more testing but I could not get this stable on my second RD600)
I had my rear fan connector set to off in the bios and using a MCX159cu..chipset was no warmer than 35Cafter 25hr of P95 blend(ambient was 24C)....
It seems there is some definite variation in mobo sensors on these boards Lome reports his sensor is off...sounds like it is similar to mine...but interestingly my vdimm is pretty close to bios setting...I recommend anyone interested get a DMM(sears has one for $12) and measure how your board works....
Reply With Quote
Bookmarks