Quote Originally Posted by gtj View Post
A little more info on exactly what your settings were when you got the BSOD would help. Voltages, Frequencies, Timings, etc.
Right, here we go:
**389x9 (3500MHz) -> Vcore=1.45V, Vfsb=1.4V, Vmch=1.6V, Ref=333, Freq=667 -> ran 3d benchmarks and everything looked ok, BSOD right when I started a game. Now it won't even POST with these settings...
**375x10 (3750MHz) -> Vcore=1.55V, Vfsb=1.4V, Vmch=1.6V, Ref=333, Freq=667 -> Ran Wprime 1024M, Cinebench95, Crystalmark, etc. No games unfortunately. Never crashed here, but never been able to go back after I tried a +5 on the fsb :/
**360x10 (3600MHz) -> Vcore=1.5V, Vfsb=1.4V, Vmch=1.6V, Ref=333, Freq=667 & 533 -> Attempts to load Windows, but freezes right when I start seeing the icons on the desktop.
**350x10 (3500MHz) -> Same as above + I tried Ref=266 & Freq=400 -> Can't fully load Windows, as above.
**333x11 (3666MHz) -> Vcore=1.55V, Vfsb=1.35V, Vmch=1.55V, Ref=333, Freq=667 -> Won't POST.
**333x10 (3333MHz) -> Vcore=1.35V, Vfsb=1.35V, Vmch=1.55V, Ref=333, Freq=667 -> Everything's ok (that's how I'm using it it atm).

As a reference, the proc was 24/7 stable at 3466MHz (266x13) with 1.4V and ran loads of benchmarks and games at 3800MHz (292x13) with 1.55V, on my previous board (P5N32-E SLI Plus)
Cooling it with h2o and temps never go over 60c at around 3.5GHz