I S*ck At Overclocking! Whats Going On!

[slim142]

Im about to throw the towel and leave this at 333mhz (which I hate because I want 400mhz so bad)
I have an E6600 with an Striker extreme and Corsair TWIN2X1024C4 DDR800 and a evga geforce 7900gs ko.

Current system configuration

SUMMARY
START
CPU= 2.4ghz - 1066fsb - c2d6600
RAM= 800mhz 4-4-4-12-1t - manual timing and voltage - TWIN2X1024-6400C4 2x512mB
FSB-Memory Clock Mode= manual
SLI-Ready Memory= disabled

END
CPU= 3.6ghz - 1600 fsb - 1.5xv
RAM= 800mhz 4-4-4-12-2t - manual timings
FSB-Memory Clock Mode: manual
SLI-Ready Memory: disabled

DETAILS
BIOS= 0402
Board Revision= 1.00G
AI Tuning: Manual
SLI Broadcast Aperture: disabled
Nvidia GPU Ex: Disabled
LinkBoost: disabled
HDD Smart Monitoring: disabled
SLI-Ready Memory: disabled

FSB - Memory Clock Mode: unlinked
FSB - Memory Ratio: manual
FSB (QDR), Mhz: 1600
Actual FSB (QDR), Mhz: 1600
MEM (DDR), Mhz: 800
Actual MEM (DDR), Mhz: 800
CPU Multiplier: 9

Vcore Voltage: manual - 1.63125v (not a typo) (varies around 1.52v-1.54v in PC Probe II)
Memory Voltage: 2.1v (2.14 in PC Probe II)
1.2v HT Voltage: 1.50 (1.55v in PC Probe II)
NB Core Voltage: 1.50 (1.52v in PC Probe II)
SB Core Voltage: 1.50 (1.52v in PC Probe II)
CPU VTT Voltage: 1.45 (1.50v in PC Probe II)
DDRII Controller Ref Voltage: auto
DDRII Channel A Ref Voltage: auto
DDRII Channel B Ref Voltage: auto

tCL : 4 (manual)
tRCD: 4 (manual)
tRP : 4 (manual)
tRAS: 12 (manual)
CMD: 2t (manual)

Advance Memory Settings
tRRD: AUTO
tRC: 22
tWR: AUTO
tWTR: AUTO
tREF: AUTO
Async Latency: AUTO

All Spectrums Disabled

CPU Internal Thermal Control: Disabled
Limit CPUID MaxVal: Disabled
Enhanced C1 (C1E): Disabled
Execute Disable Bit: Enabled
Virtualization Technology: disabled
Enhanced Intel Speedstep Tech: Disabled
LDT Frequency: 5x

PCIEX16_1 Frequency (Mhz): 100
PCIEX16_2 Frequency (Mhz): 100
PCIEX16_3 Frequency (Mhz): 100
SPP<->MCP Ref Clock, Mhz: Auto

Not Stable no matter what! orthos will fail! dont know what to do! Im about to throw the towel! Whats going on! Why cannot I get 400mhz FSB! My E6600 is L628A if it is needed.