well as my luck seems to be running this new RD600 will not run my crucial 10th anniv at 500...memtest86+ 1.70 test 5 has errors after 7 passes at 2.2v
old board 5-6-5-5-2t @ 2.2v 500mhz...50 passes of test5, winmemtest 1000% no errors, P95 v251 blend 20hrs...
new board....memtest86+ 1.70..fails after 7 passes
this board seems to run hotter chipset too...same cooling as old board(old board idle at 47/48C with 1.42v, load was 54C)...new board at 1.42v idle at 56/57...loads 62c..stock HS with 120mm fan blowing on it and ram
voltage settings..
vcore 1.51875 bios setting=1.53v bios reading old board 1.52v
NB 1.42 bios setting=1.45v bios reading.... old board 1.44v
NB 1.36 bios setting= 1.39..... old board 1.38v
vdimm 2.2v bios setting=2.22 v...old board initial showed 2.2v as well..but then after awhile showed 2.24 v
SG show at 1.51875 v....under load alot of flucuation on the new board..go from 1.48-1.52v....old board 1.48v with occ. 1.5v flucuation
So I am not sure if voltages are more or less stable
Reply With Quote
Bookmarks