-
P5B-D/E6300 no boot at default settings
Hi
* Motherboard: P5B Deluxe Wifi
* Processor: E6300
* Bios Revision: 0614
* Memory: Ocz Platinum Xtc PC2-6400 2GB 2X1GB DDR2-800 CL4-5-4-15
* Cooling: TT Big Typhoon /w Arctic Silver 5
* Power Supply : OCZ GameXStream OCZ700GXSSLI ATX12V 700W PSU
* Configured Voltages: vCore = 1.47x, vdimm = 2.30 vFSB = 1.45, vNB = 1.65
* Configured FSB: 500 FSB
* Configured Ratio: 1:1 Cpu/Ram Dual channel
* Configured Memory Timings: 5 - 5 - 5 - 15
* Any other applicable configuration modifications:
Check http://www.xtremesystems.org/forums/...d.php?t=115217
I configured my motherboard's cpu/ram and every other setting in bios by the book following most of intel guides here on XS forum, i also set *safe* cpu and memory voltages and parameters.
I followed this guide bellow for testing methods;
http://forums.anandtech.com/messagev...readid=1901991
cpu-z displayed everything ok.
I ran memtest86+ test 5 about 7 times, then full tests about 5 times successfully.
Then i ran SuperPi for both cores at 32M successfully.
Finally i ran Orthos SP2004 for about 4 hours, everything seemed fine, so i let it run 4-5 more hours then i went to check on it and found out that windows xp froze from a critical error i believe.
From there on windows would not reboot, i get no post. I had to perform CPR wich consists of switching the power supply on/off to attempt to boot the system and reset bios to default settings, which i did, and even now at default the system won't boot or post.
I also removed the battery and cleared the CMOS like outlined in the motherboard's manual and that didn't help.
I will appreciate any feedback, please anything!! Thank You.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks