Results 1 to 19 of 19

Thread: Farewell to a fallen hero!!! 32M @ DDR2-1242 CAS4 was 6400HZ's last breath... :)

Threaded View

  1. #1
    Xtreme X.I.P.
    Join Date
    Dec 2003
    Posts
    4,734

    Farewell to a fallen hero!!! 32M @ DDR2-1242 CAS4 was 6400HZ's last breath... :)

    Man, but was that a FIGHT or WHAT

    E6600, stock cooling @ 21C ambient
    ASUS P5B Deluxe, vdimm & vmch mods





    vdimm: 2.45v (BIOS) --> 2.80v LOAD (DMM)
    vcore: 1.51v (BIOS) --> 1.49v LOAD (DMM)
    vmch: 1.65v (BIOS) --> 1.67v LOAD (DMM)

    G.Skill 6400HZ @ DDR2-1242 5-4-4-4.0, 414x9=3726Mhz -> SPi16M - 5:49.516
    CPU-Z Validated!

    G.Skill 6400HZ @ DDR2-1234 5-4-4-4.0, 414x9=3704Mhz -> SPi32M - 12:45.203


    Earlier today I have done a primary dual 32M run and passed it @ 372x9=3350Mhz, DDR2-1240 5-4-4-4.0 (DDR2-889, 3:5 ratio) but I did not save it as I was expecting to work on a better time I'm CPU limited for dual32M as it is stable only up to 3.6GHz dual32M. It really cooks it up heavilly on stock cooler... So, all I have left in this department, is a set I did few days ago... I had so many other benches planned to do...

    vdimm: 2.40v (BIOS) --> 2.75v LOAD (DMM)
    vcore: 1.45v (BIOS) --> 1.47v LOAD (DMM)
    vmch: 1.65v (BIOS) --> 1.56v LOAD (DMM) - (vmch mod was done after this run)

    G.Skill 6400HZ @ DDR2-1224 8-4-4-4.0, 408x8=3264Mhz -> dual SPi32M - 15:20/15:15
    28 photos taken every pass during calculation



    Unfortunately, RAM is dead now It served me very well for the last 4 months, from 2.9v on AM2 to now 2.8v on C2D. This serves also as a precaution to all us XS freaks, be careful with voltage and cherish your RAM, hehe. You never know when it's gone

    My G.Skill 6400HZ

    May 06 - Sep 06


    Thanks for dropping by and join me in mourning .... j/k Just wanted to show off some kick a$$ clocks
    Last edited by bachus_anonym; 09-15-2006 at 09:53 PM.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •