arlight guys, specs are in the sig. right now im priming at 3.0Ghz...

cooling: scythe mine W/ silverstone fan = 70-80 cfm

FSB: 333 Mhz x4 = 1333mhz
Mem: 1:1 333mhz 5-6-6-18 (loose for now) x2 = 666mhz
vMCH: 1.6
vCore: 1.465 in bios
hyperpath 3: disabled
pci-e freq: 105
pci freq: 33.33

been priming for 20 min so far. had problem with sp2004 orthos erroring out with same settings except 1.45 vcore... havent figured out why since 1.45 seems high for only 3000mhz...

are there any major settings in the bios other than the ones i mentioned that i should be looking at?

as far as temp goes... core temp shows 58c after 20 min of sp2004, speedfan shows 41c... which should be trusted?

vCore... cpu-z shows vcore at 1.440 mostly, sometimes it drops down to 1.213!!!!! please tell me this is a glitch and vdroop isnt really THIS bad... also speedfan and pcprobe show vcore at a constant 1.44-1.45...

should i be adjusting any of the other voltages? vfsb? vICH?