7900GT over voltage protection?

[Belarnion]

Congratulation men, you did it.

Did anyone check where via lead on the other side of the PCB, because soldering directly on ISL legs sounds quite hard.

Is 1.5V and higher not too high for the regulator embedded on the GT ? (that are different from GTX )

I'm afraid it won't be much easier...



BUT: If Pin 32 and pin 22 is *already* '0', why not just connect
Only pin 32 to pin 30 and 31 to get 1,350V or
Only pin 22 to pin 21 to get 1,4V or
pin 32 to pin 30 and 31 AND pin 22 to pin 21 to get 1,55V

Would that work?