Results 1 to 25 of 63

Thread: Zippy 700W impression and fan mod

Threaded View

  1. #1
    Xtreme Addict
    Join Date
    Feb 2005
    Location
    USA
    Posts
    1,692

    Thumbs up Zippy 700W impression and fan mod

    Initially I was going to get the PCP&C 850W but I'm never a fan of split rails, after some research and hunting on the net I found only two PSU that matches my need, the Zippy/Emacs 700W PSU (PSL-6701P) and the Athena Power AP-P4ATX85FE EPS12V 850W, both of them are in the exact same price range and the 12v rail is very close, but I have never heard of the Athena Power, couldn't find any reviews anywhere, and not that it matter but one quick visit to their website had clearly steer me away from this brand. So my only option was the Zippy, after a 20min conversation and bunch of technical questions with Edward at Zippy's office in CA I felt very confident in getting this unit, and so I did from servercase.com.

    Well, I received this thing yesterday and to my surprised it's pretty big and heavy comparing to the PCP&C 510 SLI, construction and quality is top notch, but I was warned that this unit is very loud so it was being jump start as soon as I took it out of the box, indeed...this stock fan reminds me of the dang 92mm Tornado!! After 10 hours of work at data center the last thing I need is to come home to some noisy machine again I could of slice the stock fan wire and hacked up the PSU case to install a pot or fan controller, but I still have some AMD stock hs/f laying around so I use the 80mm that came with my 170 Opteron instead, this fan has a thermistor so when the temperature reach about 106 F' it could spin up to 5000rpm @57cfm so it's an excellent choice for replacement. The 3pin connector from this fan fits pretty well onto the PSU's 2pin header, it's very secure and wont' come off unless I yanked violently.

    This little fan pull lots of air and VERY quiet, I can't hear any fan noise even after couple hours of dual prime unless I place my ears directly on the PSU. All rails are rock solid with my 170 running at 3.10Ghz, I'll push it more once I received the Gskill HZ ram tomorrow, for now here's a couple pictures for your viewing pleasure

    3pin connector in place, blue cable for temperature not used.



    Stock fan vs. AMD fan(don't let the small size fool you!!)



    AMD fan installed




    Zippy 700W vs. PCP&C 510 SLI



    wimpy mid tower or smaller case need not apply!! Even the Antec Full tower barely have enough space to fit this beast
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_8364.jpg 
Views:	4201 
Size:	166.8 KB 
ID:	42954   Click image for larger version. 

Name:	IMG_8366_resize.jpg 
Views:	5669 
Size:	191.0 KB 
ID:	42955   Click image for larger version. 

Name:	IMG_8367_resize.jpg 
Views:	4203 
Size:	196.2 KB 
ID:	42956   Click image for larger version. 

Name:	IMG_8372_resize.jpg 
Views:	4906 
Size:	187.9 KB 
ID:	42957   Click image for larger version. 

Name:	IMG_8375_resize.jpg 
Views:	4109 
Size:	161.2 KB 
ID:	42958  

    Core i7 920 D0 3844A717 4.40Ghz HT on @1.36v (LinX/Prime/3D stable), Corsair 850W, 12GB OCZ Platinum 1600, P6T Deluxe V2, EVGA GTX 285 SS, OCZ Vortex SSD 30GB x3 RAID0, HAF 932.
    Water Cooling Setup: XSPC RX360, MCP355 + XSPC Res Top, Swiftech GTZ, 1/2" Tygon, Scythe S-Flex SFF21F push, 20mm yateloon D12SL-12C pull.


    Opteron 148 CABNE 0528 GPMW 3.1Ghz @1.6v Prime Stable. Westy 37" LVM-37W3, DFI Venus 975, 2GB TeamX Cronus Micron, GSkill HZ, Sapphire X1900XTX, Zippy 700W, X-Fi Xtrememusic, 36GB Raptors x2 @Raid-0.
    WC Setup: PA120.3 +Shroud, MCP655, STORM, MCW60, 1/2" Tygon, mini res, Yate Loon.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •