Vapo XE modding

[Jort]

Yesterday and today i worked on a Vapo XE for someone, he is making a casemod with a LianLi V2100.

So he asked me i could lenghten the flextube and regass it and do some mods on it.

These pics will walk you trough the things i changed, i'll comment above each pic.
have a nice read:king:

I placed a desuperheater to cool the gasses before they enter the condensor.





Then unbrazed the piece of tube between the suction filter/drier and flex hose.



After that i sawed the piece of extra flex line at the right dimentions. it is 20 Cm
long.



Then i "widened" a copper piece of 1/4" so i could put the flex lines into it.





Brazed one side of it.



Made a new tube to put between the flex line and the suction filter/drier, where the capillair comes.



Wraped the capillair back around the suction F/D, and placed it where it belongs.



This means at the exit of the liquid line filter/drier.



Little overview.



Piece where the 2 flex line's come together.



Little bit of frost frost



The first boot.



Some pics of the unit.









Tested on my venice and this is what i got, max superpi 1M stable.



Temps never got higher then -27


greetz

Jort