The Official X2 Overclocking Thread (Please Post Your OC's)

[chinkgai]

X2 4400+ CCBWE 0524 RPMW

256x11 2816 mhz (24/7 at below voltage)

263x11 2894 mhz (max i want to push at 1.525x113%)

rest of specs in sig

OS--- winxp sp2

bios---704-2

VID= 1.45
VID SPECIAL= 110%
CHIPSET= 1.5
LDT= 1.2
LDT= 4x

CPC =Enabled 1T
CAS Latency(CL) = 2
RAS to CAS(Trcd) = 2
Min RAS# Active time(Tras) = 5
Row Precharge Time(Trp) = 2
Row Cycle Time(Trc) = 7
Row Refresh Cycle Time(Trfc) = 15
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 2
Write to Read Delay(Twtr) = 2
Read to Write Delay(Trwt) = 2
Refresh Period (Tref) = 3072
Write CAS Latency(Twcl) = auto
DRAM Bank Interleave = Enabled
Skew = Increase
Skew Value = 0
DRAM Drive Strength = Level 1
DRAM Data Drive Strength = Level 1
DDRAM Response Time = Fastest
Max Async Latency = 7.0
Read Preamble Time = 5.0
Idle Cycle Limit = 16
Dynamic Counter = Disabled
R/W Queue Bypass = 8x
Bypass Max = 7x
32 byte Granularity = Disabled

all prime stables for at LEAST 12 hours before i stopped it

screenies:

2.8
http://pg.photos.yahoo.com/ph/chinkg...&.dnm=11b7.jpg

2.9
http://pg.photos.yahoo.com/ph/chinkg...&.dnm=e30c.jpg