The Official San Diego Overclocking Thread

**Jasonhk** · 07-31-2005, 12:35 PM

Update

3700+ SD AA5BN CABGE 0516TPAW
DFI SLI-DR
WATERCOOLED ASETEK TRIPLE RAD/ ANTARTICA / HYDOR L30

Super Pi : 27.953

Suicide Shot.. got higher but was lazy and did too quick and got corrupted..

3005Mhz..

**simonk** · 07-31-2005, 03:39 PM

I can't seem to get stable over 3.43 for benches what is considered the maximum "safe" voltage for a FX 57 on a Mach 2 GT?

**dogsx2** · 08-04-2005, 02:27 PM

yesterday i got the $260 3700 sd special from monarch and am happy with it. i always thought sd's were a waste of money over venice but now i'm not so sure. did some burn in on it for 9 hrs while at work and this is what i got so far.

0518 UPCW

why doesn't cpu-z show val?

**Jasonhk** · 08-06-2005, 02:28 AM

YAY Colder Night last night - hit over 3Ghz 1M Benchable.

Super Pi 27.671 @ 3005Mhz

Suicide 3130Mhz

Link

**Spinal** · 08-06-2005, 10:03 AM

my 3700+ CABGE 0522XPBW @ 2,800GHZ "280X10" 1.55v "Stock cooler lol"
Gskill DSU2F1LA 1GB @ 280 2.5 3 3 8 1T
DFI LP NF4 ULTRA-D

**ImportantAwareness89** · 08-12-2005, 01:20 AM

Ok, I'm on my first night of testing so I can't give you anything TOO special.

All at 11x multi
220: No problem for 3 hrs of OCCT Torture
225: No problem 1 hr
230 HTT: Only tested for 25 min, but freq too low for me I wanted to bump up

I ran 240 doing prime and OCCT and it was fine (2.64 GHz)

I tried 243 HTT (2.67 GHz) and OCCT would fail and would need 1.47 volts to get it to work. 2673 MHz @ 1.469 (1.300 * 113%) works fine for OCCT testing.

Here are the images.

2673 MHz
1.469 Vcore

**Lidocaine** · 08-12-2005, 11:25 AM

with 4x512 sticks of GSkill LE 1:1 all air.

**ImportantAwareness89** · 08-13-2005, 01:35 AM

Umm I hit 2.67 with 1.5 volts, but this required MAJOR@$$ scaling to get here. I'm not too happy =( Sniff. Oh well

**boblemagnifique** · 08-13-2005, 02:28 AM

San Diego 3700+ CABGE 0524 XPBW
Gigabyte K8n Sli F2
2*256 Adata BH5
Xp90c + Papst 8412N/2G (40Cfm)

2507mhz at 1.42v (250x10)

2633mhz at 1.52v (263x10)

2702mhz at 1.6v (270x10)

2772mhz at 1.66v (252x11)

**Perc** · 08-13-2005, 05:32 AM

3700 sandy 0518WPAW CABHE just got it seems to not like the 11x multi with anything higher then 235ish so heres a shot of 10x280 2800mhz 1:1 im praying for 3gigs.....

peace perc,

**dogsx2** · 08-13-2005, 09:08 AM

Originally Posted by Perc

3700 sandy 0518WPAW CABHE just got it seems to not like the 11x multi with anything higher then 235ish so heres a shot of 10x280 2800mhz 1:1 im praying for 3gigs.....

peace perc,

i have a 3700 0518UPCW that doesn't do too bad on 11x. i guess there is a big diff within the same week.

this is my 24/7 with cnq on.

sure would be nice if people used thumbnails, even with dsl it is really moving and shaking the screen when it loads.

**ante_ante** · 08-13-2005, 11:09 PM

This is what i can do with only 1,45V vcore super pi 32mb stable.
Using a Mach1 with 507 gas, but need to refill it because i hits nearly 0 degrees with 1,7v vcore. But for the moment it runnin fine.
Also my redline pc4000 runnin fine at 265mhz and 3,4V

More to come after some new gas in the cooling unit.

**Fosco** · 08-19-2005, 07:04 AM

This is with SLK948u and 92mm papst..

Still testing, watercooling to be mounted soon

**Fosco** · 08-21-2005, 06:55 AM

Uppdate! Now on water ( RBX ++ )

**Tim** · 08-21-2005, 02:14 PM

0522 TPMW's suck....bigtime

**Crazykooter** · 08-21-2005, 02:35 PM

Originally Posted by Tim

0522 TPMW's suck....bigtime

How long and how hard have your burned it in ? Some 3700's need a lot of vcore to oc worth a damn.

**Riverna** · 08-22-2005, 06:19 PM

-3700+ SD UPMW 0525 HS off
-OCZ EL VX PC4000
-X800Pro 12 Pipes PCI Express
-Tagan 480 PSU
-Watercooled

My other san diego (xpmw 0524) is very bad. 2250mhz 1.4v is the maximum stable clock

**Primoz78** · 08-22-2005, 11:23 PM

Originally Posted by Riverna

-3700+ SD UPMW 0525 HS off
-OCZ EL VX PC4000
-X800Pro 12 Pipes PCI Express
-Tagan 480 PSU
-Watercooled

My other san diego (xpmw 0524) is very bad. 2250mhz 1.4v is the maximum stable clock

Dude I have an exact chip as yours but unfortunately I can pass 250*11

I think have some motherboards problems, cause with my previous CPU...Venice 3000+ 0517APAW I can get 300*9 at 1,456V but not 1 mhz more...my DFI is today going to RMA...

Regards,
Primoz

**Fosco** · 08-23-2005, 06:27 AM

3700 0522XPMW Uppdate.

Water RBX++

**Dani** · 08-23-2005, 01:19 PM

DFI nF4 Ultra-D
Zalman 7700CU
Brand new, try 2.7GHz 1.39Vcore tomorrow

**boblemagnifique** · 08-23-2005, 04:59 PM

3700+ CABGE 0516 TPAW
XP90C + 120mm papst

**Dani** · 08-25-2005, 06:41 AM

DFI nF4 Ultra-D
Zalman 7700CU

Stepping

2702MHz @ 1.39Vcore +15h with AIR, ambient temerature ~25ÂºC/80ÂºF

**Dani** · 08-26-2005, 12:59 PM

DFI nF4 Ultra-D
Zalman 7700CU, ambient temperature ~25ÂºC/80ÂºF

**Fosco** · 08-27-2005, 06:42 AM

uppdate : now without IHS

Uppdate again !

**sideeffect** · 08-27-2005, 07:22 AM

The higher i raise the core mhz the lower i have to have the ram mhz speed is this a common thing of the san diego ?

Doesnt matter on the ram timings so much.

Current Clock

Thread: The Official San Diego Overclocking Thread

Thread Tools

Search Thread

Rate This Thread

Display

thanks monarch

Update..3700+ SD Watercooled.

24/7 settings for my new 4000+ San Diego!

Bookmarks

Bookmarks

Posting Permissions