help ....vmod p4p800

**fred** · 04-08-2005, 01:10 AM

hello
I am French and I speak very badly english it but I espere that you will include/understand me

I would like sent a tension of 3.3 volts for my GDR (twinmos). I board a p4p800 dlx (2003)

I know that it y' has 1 soldering wire, but which and or? diagram?

thank you for your assistance

I board dejas makes on this p4p800 a vmod (50k/lm358) but the tension goes down from 3.18v has 3.05 volts in load.

t is for that that I want tested a 3.3v. my food is a tower antec 1080

**persivore** · 04-08-2005, 01:20 AM

There is a Vdimm mod for the p4p800 here . You might also need to raise your 3.3v line if you want to run 3.3v or more through your RAM.

**fred** · 04-08-2005, 01:22 AM

not persivore I board dejas does that. it is not what I want
how to obtain from the 3.3 v by welding a wire? thank you

**persivore** · 04-08-2005, 01:26 AM

The problem is probably your PSU's 3.3v line. You usually need your 3.3v line to be 0.2v above your Vdimm

Sorry, I didn't see your edit. You should be able to adapt this for your board (connecting pin 7 of the Dimm slot to the 3.3v line).

**fred** · 04-08-2005, 03:46 AM

Originally Posted by persivore

The problem is probably your PSU's 3.3v line. You usually need your 3.3v line to be 0.2v above your Vdimm

Sorry, I didn't see your edit. You should be able to adapt this for your board (connecting pin 7 of the Dimm slot to the 3.3v line).

is it the same thing for the p4p800 dlx.. ?
I want 3.3vio=vdimm

**persivore** · 04-08-2005, 04:08 AM

It should be the same. You might have to adjust the mod for the different board layout tho.

**fred** · 04-08-2005, 04:27 AM

I don't understand

what shall I keep exactly? here ?

what link shall I keep simply to have ? vio = vdimm

http://www.xtremesystems.org/forums/...5&pagenumber=1

Is there simply this wire to connect ?

http://www.uploadyourimages.com/view...1849fl0000.jpg

**persivore** · 04-08-2005, 04:49 AM

The wire in your second picture should be the only one you need to connect. The others are just to help make the mod more stable.

**fred** · 04-08-2005, 05:02 AM

thank you very much. I
I go tested
many probléme with the English language

nb: it is certainly necessary dismounted all the motherboard...? to do that