MMM
Results 1 to 5 of 5

Thread: ECS 755 A2 Modded Bios File.

  1. #1
    Xtreme 3D Mark Team Staff
    Join Date
    Nov 2002
    Location
    Juneau Alaska
    Posts
    7,607

    ECS 755 A2 Modded Bios File.

    I took a look at this bios file, cause you can often find these boards dirt cheap on newegg, for about $30 used for the AMD64.

    upon checking out this bios, it's got TONS of stuff to unhide and fiddle with.
    some alittle more risky then usual.
    like I don't know what will happen if you try to enable 32bit HT.
    16 bit HT is generally the fastest I ever seen.

    but, Heres the mods to this Bios.

    1. Unlocked the Vcore. 1.5 volts to +.75 mV should now selectable.

    2. Hammer FID control Unlocked.

    3. Hammer VID control unlocked.

    4. 1T/2T now selectable.

    5. 300 and 500 mhz HT speeds now selectable (might show as 1.5 and 2.5 under the HT menu)

    6. HT speeds unlocked the 2 bit, 4 bit, and 32 bit options.

    7. ACPI function now able to be enabled or disabled. (you will have to reinstall your OS if you mess with this)

    8. All Voltages are now displayed in PC health status.

    IF you want this BIOS, then PM me and I will email it to you.
    But like always.
    you do this at your own risk.
    no ones making you mod anything, it's your choice to take the chance or not.
    all I did was unhide, and make these options available.

    nothing else was touched in the bios.
    theres no extra hidden FSB to unlock other then a 232 max.
    but the extra voltages, and such should help you max it out.
    the Multiplier and such control shouldn't be much help with only a 232 max FSB but it's there if you wanna fiddle with it.




    "The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."

  2. #2
    Fused
    Join Date
    Dec 2003
    Location
    Malaysia
    Posts
    2,769
    yes that is killer board ....

    *shhhhhh....

  3. #3
    Xtreme 3D Mark Team Staff
    Join Date
    Nov 2002
    Location
    Juneau Alaska
    Posts
    7,607
    well it's cheap, and it's there to mod.
    plus, I have one coming for a seti machine.
    might as well mod it

    if it's any good, is another question indeed.
    SIS?
    ECS?

    but for $30, even a few mhz OC is ok.




    "The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."

  4. #4
    Fused
    Join Date
    Dec 2003
    Location
    Malaysia
    Posts
    2,769
    30USD .... nice bang for buck

    a killer board.. how about the Caps & mosfet... ?

  5. #5
    Registered User
    Join Date
    Nov 2005
    Posts
    4
    Bought one of these refurbed from Newegg for 34 bucks delivered plus a Sempron 64 2600. I did the Modbin6 thing to unlock the 1t settings and the vcore +.75. With generic DDR400 ram it does 250htt @ 2ghz stable now with the 166 memory settings. Ran Prime95 for 11hours w/ no errors. If you can't do the Modbin thing you can use A64 Tweaker to disable the 2t timing. It gives the memory a nice little boost. But without the bios mod you have to do it manually everytime you reboot.
    Last edited by ShadowdogKGB; 11-13-2005 at 04:23 PM.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •