Where i can buy the O ring that hold down plates on the evaporator on chily 1 , help
Good morning Gents . The rubber O ring on the evaporator chilly 1 that holds the hold down plates of my SS just broke , can you guys tell me the size of it and where to buy it ? i will attach a picture here to show exactly what i'm talking about.
Thank you in advanced.
Kind regards: Angelo
[IMG][/IMG]
** Found it at PepBoys Autoparts**
It comes in packages of 10 and they sell in a big box too , they are 31mm for the chily 1 evaporator groove.
Keep us posted on how this works out :-)
I used to Bench-a-Lot but now I Bench-a-Little. Do You Bench your CPU?? It can Make it Stronger and Smarter. Just ask a Bencher
DO OR DO NOT, THERE IS NO TRY <- From Master Yoda
Retreat HELL -> WE JUST GOT HERE <- A remake made by A US Marine Officer in WWI
Originally Posted by MaddMutt
It's working great and as expected.
Great to hear and glad to see you are getting great use of it and its versatility. I have had it hooked to many GPUs.
Intel 9990XE @ 5.1Ghz
ASUS Rampage VI Extreme Omega
GTX 2080 ti Galax Hall of Fame
64GB Galax Hall of Fame
Intel Optane
Platimax 1245W
Intel 3175X
Asus Dominus Extreme
GRX 1080ti Galax Hall of Fame
96GB Patriot Steel
Intel Optane 900P RAID
Thank you Charles , the unit is a beast and very strong. Lots of fun with this ss , thank you for the good deal on it , appreciate it !
It let me run the new rtx 3090 at 2430/1351Mhz hooked to this SS - https://hwbot.org/submission/4578588...090_2sec_598ms
wow great result , can you share spec of the ss unit ?
what are idle and load temp of the cpu
2600K working in 4.8 GHZ so far
2600k @(4600Ghz) 1.42v : (under water)
Asus B2 mobo
4 GiG DDR 2400 MHZ
GTX 570 @ 1.063v ( 910/1820/2001 Mhz) .(under water).
1020 W PSU
Hobie's : Overclocking .... Overclocking .... Overclocking
I am pretty sure it is a secop dual compressor unit using 21cc of total displacement and a 35mm chilly1 evap. As for cap tube I am guessing 7-8 ft of 0.042"
Posting Permissions
Reply With Quote
Bookmarks