140mm Fan Testing on a HWlabs SR1 Radiator Round 7

[iddqd]

servo should just start making 140mm GTs

[Systemlord]

I realize this thread is a year old but I'm having great trouble locating the 1/8 foam gasket Martinm210 used on his SR1 140mm rad and BGears 140mm to 120mm adapter, I've Googled it to death, can someone point me in the right direction?

Thank you much appreciated!

[Church]

Systemlord: first LC shop i checked. Stopped looking further, but i'm guessing many carrying those.

[Systemlord]

Systemlord: first LC shop i checked. Stopped looking further, but i'm guessing many carrying those.

I already have the BGears adapters, what I was looking for was the foam strips in picture below to lessen vibration. The foam is used between the adapter and the radiator and the adapter and the fan.

[tw33ter]

That looks very similiar to the foam weatherstripping you can get at any hardware store (lowe's or home depot). It's got adhesive on one side.

Weather Stripping @ Home Depot

[Systemlord]

Alright for the other's out there planning on using BGears 140mm-120mm fan adapters to fit on 140mm radiators I've experimented with the sponge tape, after some experimentation I've found the best method for getting a very even effective and just clean looking gasket sure to make a difference! In the pictures below I first took four strips of "1/8" Super Firm Sponge Tape" (title on bag) and created a foundation so that the upper layer of sponge tape lays flat instead of folding down, alright already let's get to the pictures!

[airs]

Thanks Systemlord, just bought some of that from Ace!