G.Skill F3-17600CL7D-4GBXHD

[Mafio]

2133 8-9-8 are ALSO Hyper

1140 MHz 7-8-7-22 1t air cooled



i've lost the pics with the heatsink off, BTW in the following one you can see blunt corners.



this is a retail kit i bought from memoryc 3 or 4 weeks ago.
it have 8 layer green PCB and MNH-E-Hyper ICs...ah, and just like any other Hyper i've tried super-pi 32M is a no go...so beware...

[l0ud_sil3nc3]

this makes me wanna buy some of those 7-10-7 sticks to go with my 2133 8-9-8 kits as they seem to be a bit better than all three of my kits.

[l0ud_sil3nc3]

I have been waiting for a set of these for a while

http://www.gskill.com/products.php?index=396&c1=&c2=

they popped up on neweggs website as a out of stock item and then disappeared a few days later, does anybody know of any stock?

[BeepBeep2]

2133 8-9-8 are ALSO Hyper

1140 MHz 7-8-7-22 1t air cooled



i've lost the pics with the heatsink off, BTW in the following one you can see blunt corners.



this is a retail kit i bought from memoryc 3 or 4 weeks ago.
it have 8 layer green PCB and MNH-E-Hyper ICs...ah, and just like any other Hyper i've tried super-pi 32M is a no go...so beware...

You've got to be joking. Ripjaws X with MNH-E? MNH-E has been gone since early last year...wtf

[hiwa]

some are MGH but 90% are BBSE

[hiwa]

I have been waiting for a set of these for a while

http://www.gskill.com/products.php?index=396&c1=&c2=

they popped up on neweggs website as a out of stock item and then disappeared a few days later, does anybody know of any stock?

they are very very handpicked Hynix ICs not easy make them for manufactories.

[l0ud_sil3nc3]

they are very very handpicked Hynix ICs not easy make them for manufactories.

I know but I still want a set to play with, I mean 2300 9-11-9 on a 2X4 kit =

[badatgames18]

2133 8-9-8 are ALSO Hyper

1140 MHz 7-8-7-22 1t air cooled

SNIP

i've lost the pics with the heatsink off, BTW in the following one you can see blunt corners.

SNIP
this is a retail kit i bought from memoryc 3 or 4 weeks ago.
it have 8 layer green PCB and MNH-E-Hyper ICs...ah, and just like any other Hyper i've tried super-pi 32M is a no go...so beware...

what did you mean by this? wasn't stable with 32m? i'm assuming it wasn't stable at the frequency you were running it at?

[Mafio]

what did you mean by this? wasn't stable with 32m? i'm assuming it wasn't stable at the frequency you were running it at?

i mean that even at default frequency and default timings (2133 8-9-8) 1 or 2 seconds after you launch super-pi 32M windows freeze.
i didn't tried prime95 or other similar stuff but i'm quite confident the behavior would be the same as 32M.
at least they are good for 3dmark...
if you get a BBSE kit all is fine, but if you get a kit with Hyper you have just throwed away 150 €.

p.s. and yes, this kit is MNH-E, not MGH-E...i remember that not so long time ago crio found a kit of ripjawX 2133 8-9-8 with MNH-E.

[badatgames18]

i mean that even at default frequency and default timings (2133 8-9-8) 1 or 2 seconds after you launch super-pi 32M windows freeze.
i didn't tried prime95 or other similar stuff but i'm quite confident the behavior would be the same as 32M.
at least they are good for 3dmark...
if you get a BBSE kit all is fine, but if you get a kit with Hyper you have just throwed away 150 €.

p.s. and yes, this kit is MNH-E, not MGH-E...i remember that not so long time ago crio found a kit of ripjawX 2133 8-9-8 with MNH-E.

i knew sb had problems with hyper, but i thought it was confined to not being able to boot... i just spent 150 on 8-8-8 dominator hyper mnh-e and 220 for 7-8-7 dominator mnh-e
how many hyper kits have exhibited this behavior?

[websmile]

There are few hyper kits that don´t boot, and if they don´t boot it´s normally at frequencies above 1000. Main problem is that alot of Hyper mems don´t run stable and not even 2 or 4M on SB, but with UD7 and M$E you have in signature chances are best that they run for these boards are not castrated via bios as much as cheaper boards. Problem remains that you depend on luck, most of my hypers run flawless on UD5 and Gene-Z, but there´s definitely no guarantee, and afaik MNH-E have even bigger problems seeing average than MGH-E. Give it a try and good luck

[hiwa]

2150 7-9-7 1.65 with 17000 7-10-7 kit

[l0ud_sil3nc3]

i knew sb had problems with hyper, but i thought it was confined to not being able to boot... i just spent 150 on 8-8-8 dominator hyper mnh-e and 220 for 7-8-7 dominator mnh-e
how many hyper kits have exhibited this behavior?

I was wondering why you were buying so many sets of hypers

That's the reason I sold all of mine because none worked at 2133 even with additional voltage. I tried a two sets of Dominator GT 2000 8-8-8-24, STT 2200 8-8-8-24 and I even borrowed a set of STT 2000 7-7-7-21 to test with no luck. I couldn't even run 32m, just like Mafio said insta freeze. If you have to have hypers spend the money and find a good set of GTX2 as they seem to have a higher chance of working.

[badatgames18]

I was wondering why you were buying so many sets of hypers

That's the reason I sold all of mine because none worked at 2133 even with additional voltage. I tried a two sets of Dominator GT 2000 8-8-8-24, STT 2200 8-8-8-24 and I even borrowed a set of STT 2000 7-7-7-21 to test with no luck. I couldn't even run 32m, just like Mafio said insta freeze. If you have to have hypers spend the money and find a good set of GTX2 as they seem to have a higher chance of working.

just tried both of my sets today
instant freeze also... seems to get fixed if i use the 1866 strap... with 2133 it's a no go

[Dumo]

just tried both of my sets today
instant freeze also... seems to get fixed if i use the 1866 strap... with 2133 it's a no go

My Dom GT 2000 C8 need 1.8Vdimm and 1.2Vtt on UD7 to go to windows @ 2133+ 7-8-7-24...



Heres comparo to Gskill 17000 C8 @ 2133+ 6-9-6-22...

[flesheatinvirus]

That is pretty close, nice timings on the GT.

[owikh84]

lower tRCD wins!

[l0ud_sil3nc3]

My Dom GT 2000 C8 need 1.8Vdimm and 1.2Vtt on UD7 to go to windows @ 2133+ 7-8-7-24...



Heres comparo to Gskill 17000 C8 @ 2133+ 6-9-6-22...

nice comparison Dumo

[Barr3l Rid3r]

Dumo can you run Superpi 32mb at those ram settings?

[Dumo]

Dumo can you run Superpi 32mb at those ram settings?

Yes, with 2222 6-9-6-22, but haven't tried with dom. GT. I'm not that good with 2D bench

[websmile]

Not bad, these 2200 G/Skill, I only manged to get the predecessor which is older(2009) and the kit is already used but they still work -2200 PIS 2200 7-10-10-27


Damned BCLK limit on this cra*** SB garbage is more than enough to ruin a mans day

[badatgames18]

the day i get money in my pp... the cas8 2133 is oos @ memory C

and when will those 7-10-7 ever go back in stock? were they even in stock? never saw them anywhere

only option is a 7-10-10 2200MHz kit from newegg

you guys think those are any good? same ic as the 7-10-7 2133?(XEY)

[CHiLLiN1369]

i just received my F3-17600CL7D-4GBXHD kit today... have they always been black pcb's?
awaiting a new 2500k that i hope isn't a dud...
can't wait to test on my MIVE...

[Maximous]

I got a set of those 2133 8-9-8 ripjaws x and they run 32m right under 2200 7-9-7-25-1T @ 1,76v. Running them on a gene-z. Have not taken the sinks of to see the ic but its said to be bbse.

[Counter CS]

Subrscribed :P

Looking for one or two kit of those. I konw where to get them