Gskill F3-17000CL8-D

[l0ud_sil3nc3]

Looks good stasio and l0ud_sil3nc3 what kind of secondary settings/timings are you running with your kits?

well

I believe everything was on auto except TRFC (110).

I too am curious as to what I can set the subtimings on these as I have no idea what will work and what will not

[C-N]

well

I believe everything was on auto except TRFC (110).

I too am curious as to what I can set the subtimings on these as I have no idea what will work and what will not

Not that I find it makes a lot off difference in real life but I've pulled my set in as tight as they will go for 24/7 running at 2222MHz, cant remember the settings off the top of my head but I'll post up my UD5 settings later if you want.

I run 2133 @ 1.58 & 2222MHz 1.64v with the below settings

Advanced Memory Settings:

System Memory Multiplier (SPD) ........................[ 21.33
Performance Enhance ...................................[ Extreme
DRAM Timing Selectable (SPD) ..........................[ Quick
Channel Interleaving ..................................[ Enabled
Rank Interleaving .....................................[ Enabled

Channel A Timing Settings:

##Channel A Standard Timing Control##

CAS Latency Time ......................................[ 8
tRCD ..................................................[ 9
tRP ...................................................[ 8
tRAS ..................................................[ 20 performance gain
tRC ...................................................[ 2
tRRD ..................................................[ 1
tWTR ..................................................[ 3
tWR ...................................................[ 1
tWTP ..................................................[ 12
tWL ...................................................[ 6 performance gain
tRFC ..................................................[ 67 performance gain
tRTP ..................................................[ 3
tFAW ..................................................[ 32
Command Rate (CMD) ....................................[ 1
IO Latency ............................................[ 2/Auto
Round Trip Latency ....................................[ Auto

Edit: Corrected timings

They make this in Super PI & AIDA

[Dumo]

Not that I find it makes a lot off difference in real life but I've pulled my set in as tight as they will go for 24/7 running at 2222MHz, cant remember the settings off the top of my head but I'll post up my UD5 settings later if you want.

Wow, awesome runs there C-N

Thanks for sharing info

[l0ud_sil3nc3]

Not that I find it makes a lot off difference in real life but I've pulled my set in as tight as they will go for 24/7 running at 2222MHz, cant remember the settings off the top of my head but I'll post up my UD5 settings later if you want.

I run 2133 @ 1.58 & 2222MHz 1.64v with the below settings

Advanced Memory Settings:

System Memory Multiplier (SPD) ........................[ 21.33
Performance Enhance ...................................[ Extreme
DRAM Timing Selectable (SPD) ..........................[ Quick
Channel Interleaving ..................................[ Enabled
Rank Interleaving .....................................[ Enabled

Channel A Timing Settings:

##Channel A Standard Timing Control##

CAS Latency Time ......................................[ 8
tRCD ..................................................[ 9
tRP ...................................................[ 8
tRAS ..................................................[ 20 performance gain
tRC ...................................................[ 2
tRRD ..................................................[ 1
tWTR ..................................................[ 3
tWR ...................................................[ 1
tWTP ..................................................[ 12
tWL ...................................................[ 6 performance gain
tRFC ..................................................[ 67 performance gain
tRTP ..................................................[ 3
tFAW ..................................................[ 32
Command Rate (CMD) ....................................[ 1
IO Latency ............................................[ 2/Auto
Round Trip Latency ....................................[ Auto

Edit: Corrected timings

They make this in Super PI & AIDA

C-N you have a beast of a chip

thanks for the sub timings, I am going to try them when I get back to house later

getting close 5.5xx on 32m

[Hondacity]

thats so awesome C-N!!!

bravo!

[owikh84]

Intel Core i7 2600K @ 5.0 GHz (4C/8T)
Asus Maximus IV Extreme 1298
2x2GB G.Skill RipjawsX F3-17000CL8D-4GBXMD 2133C8 @ 2133Mhz 7-9-7-20-1T
2x MSI GTX580 SLI, 930/4100Mhz
Corsair AX1200


second round with lower VTT and improved GFlops...

[l0ud_sil3nc3]

@ owikh84


set linx to run on 4 threads only and your gflops will increase as it is harder to pass this way

[owikh84]

@ owikh84


set linx to run on 4 threads only and your gflops will increase as it is harder to pass this way

Initially i had the same thought. But not for now, higher GFlops doesnt mean more stressful. 4 threads is easier to pass, since u got shorter time between 2 runs which is faster to run away from errors. Anyway just my POV.

[flesheatinvirus]

Nice stix C-N.

[cstkl1]

nice.. thats 1.68v set dram bios read 1.66, real vdimm around 1.67 approximately

[C-N]

Wow, awesome runs there C-N

Thanks for sharing info

C-N you have a beast of a chip

thanks for the sub timings, I am going to try them when I get back to house later

getting close 5.5xx on 32m

thats so awesome C-N!!!

bravo!

Nice stix C-N.

Thanks guys

SB rocks but with these GSkills it rocks a little harder

I'd be interested to see how people get on tightening the subs up keep us posted.

[l0ud_sil3nc3]

[Punisher!]

Great OC! VDDR?

[l0ud_sil3nc3]

@ Punisher!

1.68v

[Elmy]

Just ordered mine... Can't wait to see what these can do :-)

[Dumo]

Got this one http://www.newegg.com/Product/Produc...82E16820231453

[l0ud_sil3nc3]

Got this one http://www.newegg.com/Product/Produc...82E16820231453

curios to see if they perform any better than the 2133 set

[Dumo]

curios to see if they perform any better than the 2133 set

Will test it soon.

Heres C8 on MIVE

[l0ud_sil3nc3]

Will test it soon.

Heres C8 on MIVE

you mean c6 right, or do you meant his is the c8 set running at 6-9-6?

regardless 2133 6-9-6 looks great

[Dumo]

Yep, C8 set running at 6-9-6

[l0ud_sil3nc3]

Yep, C8 set running at 6-9-6

I think you have a nice set of memory there, what were your secondary timings?

[PolRoger]

Will test it soon.

Heres C8 on MIVE

Looks good Dumo... How about a SuperPi 32M @ 6-9-6?


I'd seen that 2200 C9 kit on GSkill's site. Do you think you'll end up posting here or start a new thread?

[l0ud_sil3nc3]

Looks good Dumo... How about a SuperPi 32M @ 6-9-6?


I'd seen that 2200 C9 kit on GSkill's site. Do you think you'll end up posting here or start a new thread?

here's a little 6-9-6 2133 action at 5ghz

[Dumo]

Looks good Dumo... How about a SuperPi 32M @ 6-9-6?


I'd seen that 2200 C9 kit on GSkill's site. Do you think you'll end up posting here or start a new thread?

32m no go at those settings, probly need more Vs.

I killed my 57X cpu...condensation

[l0ud_sil3nc3]

32m no go at those settings, probly need more Vs.

I killed my 57X cpu...condensation

no way f(l)uckin worst