MMM
Page 5 of 9 FirstFirst ... 2345678 ... LastLast
Results 101 to 125 of 208

Thread: A start..2600K and Intel Burrage board

  1. #101
    Egyptian OverClocker
    Join Date
    Mar 2005
    Location
    Cairo, Egypt
    Posts
    3,356
    Quote Originally Posted by Jupiler View Post
    Dave,

    I took your advise and ordered a 2600K.
    Thanks for having me spending even more money than I first planned to (2500k).
    LOOOOOL

    the exact same happened with me
    Soon to be :
    ASUS P8P67 Deluxe, Intel SB i7-2600k, G.Skill Rj-X F3-12800CL6D-4GBXH, MSI HD6950 2GB, Corsair 750AX, Intel 80GB G2 SSD, DELL U2410

    Used to be: SaFrOuT

  2. #102
    Xtreme Member
    Join Date
    Mar 2010
    Posts
    368
    Quote Originally Posted by Movieman View Post
    Hello my friend.
    Yes, you are right.
    The 980's are the king of the single socket.
    Where I see these being a good choice is for people thinking of building a lower cost cruncher.
    In the US you can buy a 2600K for app $330.00 while a 980x costs close to a $1000.00
    Then the cost of the boards is almost the same but you only need 2 sticks of DDR3 memory vs the 3 on the X58 chipsets.
    Maybe it's usefullness is for those that want a top producing system but don't want or can't afford the top Hex's..
    So far I like it except that flashing the bios on this Intel board is causing me to pull out what remaining hair I have.
    There are 4 ways to update bios and I've tried all of them many times in the past 2 days and the only thing I've accomplished is to waste time that could have been crunching.
    Dave, I agree, that costwise (cents/point) the 2600K is an absolute winner.
    It cumulates a lower acquisition cost plus lower energy cost. No question about that.
    [SIGPIC][/SIGPIC]

  3. #103
    I am Xtreme-ly Unemployed
    Join Date
    Nov 2005
    Location
    Palmdale, CA USA
    Posts
    1,932
    Quote Originally Posted by SaFrOuT View Post
    LOOOOOL

    the exact same happened with me
    Ditto... except I also just bought a 1090T in December. Looks like my wife is getting an early upgrade
    I'm doing science and I'm still alive...

  4. #104
    Xtreme X.I.P.
    Join Date
    Jun 2002
    Location
    Belgium
    Posts
    4,477
    Quote Originally Posted by SiGfever View Post
    He can sell ice cubes to Eskimos.
    He'd sell you your own underwear while you're waring it.


    Quote Originally Posted by Movieman View Post
    And to Belgian's..
    Don't be surprised if, during this week, you get a phone call coming from my house, and it won't be me on the phone.
    You better go hiding in your basement and camp there for the next coming months.
    Rig #1
    Gigabyte P67A-UD4 trying to figure out this POS board
    2600k @ ?????
    2x2Gb GSkill RipJaws-X 1333 (7-7-7-21)
    ATI 5850
    Coba Nitrox 750W
    Watercooled with HK 3.0 CU, Watercool GPU-X³ 5870 Nickel, PA120.3, Laing Ultra with XSPC top


    Rig #2
    DFI UT P35-T2R (0317 bios)
    E8200 @ 4000 (1.216V) / 4100 (1.248V) / 4200 (1.296V) / 4300 (1.344V)
    2x2Gb Chaintech Apogee GT PC2-8500
    Powercolor 4870
    Corsair 520HX
    Watercooled with HK 3.0 CU, EK-FC4870, Feser tripple, Laing Ultra pump


    Quote Originally Posted by Movieman View Post
    I've got Supermicro boards that lasted longer than one of my marriages!

  5. #105
    V3 Xeons coming soon!
    Join Date
    Nov 2005
    Location
    New Hampshire
    Posts
    36,363
    Quote Originally Posted by Jupiler View Post
    He'd sell you your own underwear while you're waring it.
    Well hell why not?
    I'd always learned that in sales the key was "Find a market and fill it"

    Don't be surprised if, during this week, you get a phone call coming from my house, and it won't be me on the phone.
    You better go hiding in your basement and camp there for the next coming months.
    That darling of a beautiful lady thats your wife?
    Nah, she's a sweetheart and would never be upset with me..
    Crunch with us, the XS WCG team
    The XS WCG team needs your support.
    A good project with good goals.
    Come join us,get that warm fuzzy feeling that you've done something good for mankind.

    Quote Originally Posted by Frisch View Post
    If you have lost faith in humanity, then hold a newborn in your hands.

  6. #106
    I am Xtreme
    Join Date
    Dec 2008
    Location
    France
    Posts
    9,060
    Quote Originally Posted by Jupiler View Post
    He'd sell you your own underwear while you're waring it.

    And I didn't know Dave was a sales or marketing guy!..
    Donate to XS forums
    Quote Originally Posted by jayhall0315 View Post
    If you are really extreme, you never let informed facts or the scientific method hold you back from your journey to the wrong answer.

  7. #107
    V3 Xeons coming soon!
    Join Date
    Nov 2005
    Location
    New Hampshire
    Posts
    36,363
    Quote Originally Posted by zalbard View Post

    And I didn't know Dave was a sales or marketing guy!..
    25 years in sales + 10 in Marketing..
    Crunch with us, the XS WCG team
    The XS WCG team needs your support.
    A good project with good goals.
    Come join us,get that warm fuzzy feeling that you've done something good for mankind.

    Quote Originally Posted by Frisch View Post
    If you have lost faith in humanity, then hold a newborn in your hands.

  8. #108
    Xtreme X.I.P.
    Join Date
    Jun 2002
    Location
    Belgium
    Posts
    4,477
    Quote Originally Posted by Movieman View Post
    Well hell why not?
    I'd always learned that in sales the key was "Find a market and fill it"



    That darling of a beautiful lady thats your wife?
    Nah, she's a sweetheart and would never be upset with me..
    I wonder what you'd like to fill in some underwear, besides the "thing" that's hidden behind it.
    Better hang a warning sign in front of it saying "ONLY OPEN IN CASE OF REAL EMERGENCY"

    You'd be surprised.
    She sometimes even surprises me after 22 years.
    Rig #1
    Gigabyte P67A-UD4 trying to figure out this POS board
    2600k @ ?????
    2x2Gb GSkill RipJaws-X 1333 (7-7-7-21)
    ATI 5850
    Coba Nitrox 750W
    Watercooled with HK 3.0 CU, Watercool GPU-X³ 5870 Nickel, PA120.3, Laing Ultra with XSPC top


    Rig #2
    DFI UT P35-T2R (0317 bios)
    E8200 @ 4000 (1.216V) / 4100 (1.248V) / 4200 (1.296V) / 4300 (1.344V)
    2x2Gb Chaintech Apogee GT PC2-8500
    Powercolor 4870
    Corsair 520HX
    Watercooled with HK 3.0 CU, EK-FC4870, Feser tripple, Laing Ultra pump


    Quote Originally Posted by Movieman View Post
    I've got Supermicro boards that lasted longer than one of my marriages!

  9. #109
    V3 Xeons coming soon!
    Join Date
    Nov 2005
    Location
    New Hampshire
    Posts
    36,363
    Quote Originally Posted by Jupiler View Post
    I wonder what you'd like to fill in some underwear, besides the "thing" that's hidden behind it.
    Better hang a warning sign in front of it saying "ONLY OPEN IN CASE OF REAL EMERGENCY"

    You'd be surprised.
    She sometimes even surprises me after 22 years.
    You forget, I've spoken to her and she's a gem..
    Crunch with us, the XS WCG team
    The XS WCG team needs your support.
    A good project with good goals.
    Come join us,get that warm fuzzy feeling that you've done something good for mankind.

    Quote Originally Posted by Frisch View Post
    If you have lost faith in humanity, then hold a newborn in your hands.

  10. #110
    Xtreme X.I.P.
    Join Date
    Jun 2002
    Location
    Belgium
    Posts
    4,477
    Quote Originally Posted by Movieman View Post
    You forget, I've spoken to her and she's a gem..
    OK then.
    But don't come crying afterwards, I warned you.
    Rig #1
    Gigabyte P67A-UD4 trying to figure out this POS board
    2600k @ ?????
    2x2Gb GSkill RipJaws-X 1333 (7-7-7-21)
    ATI 5850
    Coba Nitrox 750W
    Watercooled with HK 3.0 CU, Watercool GPU-X³ 5870 Nickel, PA120.3, Laing Ultra with XSPC top


    Rig #2
    DFI UT P35-T2R (0317 bios)
    E8200 @ 4000 (1.216V) / 4100 (1.248V) / 4200 (1.296V) / 4300 (1.344V)
    2x2Gb Chaintech Apogee GT PC2-8500
    Powercolor 4870
    Corsair 520HX
    Watercooled with HK 3.0 CU, EK-FC4870, Feser tripple, Laing Ultra pump


    Quote Originally Posted by Movieman View Post
    I've got Supermicro boards that lasted longer than one of my marriages!

  11. #111
    V3 Xeons coming soon!
    Join Date
    Nov 2005
    Location
    New Hampshire
    Posts
    36,363
    Quote Originally Posted by Jupiler View Post
    OK then.
    But don't come crying afterwards, I warned you.
    I'm safe..She came across as a very practical lady and I'm 2500 miles away.
    She wouldn't spend the money on the trip just to come and beat me senseless!
    Crunch with us, the XS WCG team
    The XS WCG team needs your support.
    A good project with good goals.
    Come join us,get that warm fuzzy feeling that you've done something good for mankind.

    Quote Originally Posted by Frisch View Post
    If you have lost faith in humanity, then hold a newborn in your hands.

  12. #112
    Xtreme X.I.P.
    Join Date
    Jun 2002
    Location
    Belgium
    Posts
    4,477
    Quote Originally Posted by Movieman View Post
    I'm safe..She came across as a very practical lady and I'm 2500 miles away.
    She wouldn't spend the money on the trip just to come and beat me senseless!
    Maybe she won't spend it, but I gladly pay her ticket.
    Rig #1
    Gigabyte P67A-UD4 trying to figure out this POS board
    2600k @ ?????
    2x2Gb GSkill RipJaws-X 1333 (7-7-7-21)
    ATI 5850
    Coba Nitrox 750W
    Watercooled with HK 3.0 CU, Watercool GPU-X³ 5870 Nickel, PA120.3, Laing Ultra with XSPC top


    Rig #2
    DFI UT P35-T2R (0317 bios)
    E8200 @ 4000 (1.216V) / 4100 (1.248V) / 4200 (1.296V) / 4300 (1.344V)
    2x2Gb Chaintech Apogee GT PC2-8500
    Powercolor 4870
    Corsair 520HX
    Watercooled with HK 3.0 CU, EK-FC4870, Feser tripple, Laing Ultra pump


    Quote Originally Posted by Movieman View Post
    I've got Supermicro boards that lasted longer than one of my marriages!

  13. #113
    V3 Xeons coming soon!
    Join Date
    Nov 2005
    Location
    New Hampshire
    Posts
    36,363
    Quote Originally Posted by Jupiler View Post
    Maybe she won't spend it, but I gladly pay her ticket.
    OK, now that I didn't count on!
    Hell, if she shows up I'll feed her well and she'll forget why she made the trip!
    Crunch with us, the XS WCG team
    The XS WCG team needs your support.
    A good project with good goals.
    Come join us,get that warm fuzzy feeling that you've done something good for mankind.

    Quote Originally Posted by Frisch View Post
    If you have lost faith in humanity, then hold a newborn in your hands.

  14. #114
    Xtreme Member
    Join Date
    Mar 2010
    Posts
    368
    Quote Originally Posted by Movieman View Post
    OK, now that I didn't count on!
    Hell, if she shows up I'll feed her well and she'll forget why she made the trip!
    Sorry Dave. You were extremely convincing but I did not buy it. I am setting up a new rig and guess what... it is an 1366 socket Rampage III board with an 980X. I think this has to do with psychology. Once you have touched 6th level in the direction of the crunchers Nirvana, it is very difficult to go down two levels.
    [SIGPIC][/SIGPIC]

  15. #115
    Xtreme X.I.P.
    Join Date
    Jun 2002
    Location
    Belgium
    Posts
    4,477
    Quote Originally Posted by Movieman View Post
    OK, now that I didn't count on!
    Hell, if she shows up I'll feed her well and she'll forget why she made the trip!
    Sorry mate, but she's on a diet, starting tomorrow.
    Rig #1
    Gigabyte P67A-UD4 trying to figure out this POS board
    2600k @ ?????
    2x2Gb GSkill RipJaws-X 1333 (7-7-7-21)
    ATI 5850
    Coba Nitrox 750W
    Watercooled with HK 3.0 CU, Watercool GPU-X³ 5870 Nickel, PA120.3, Laing Ultra with XSPC top


    Rig #2
    DFI UT P35-T2R (0317 bios)
    E8200 @ 4000 (1.216V) / 4100 (1.248V) / 4200 (1.296V) / 4300 (1.344V)
    2x2Gb Chaintech Apogee GT PC2-8500
    Powercolor 4870
    Corsair 520HX
    Watercooled with HK 3.0 CU, EK-FC4870, Feser tripple, Laing Ultra pump


    Quote Originally Posted by Movieman View Post
    I've got Supermicro boards that lasted longer than one of my marriages!

  16. #116
    V3 Xeons coming soon!
    Join Date
    Nov 2005
    Location
    New Hampshire
    Posts
    36,363
    Quote Originally Posted by EtaCarinae View Post
    Sorry Dave. You were extremely convincing but I did not buy it. I am setting up a new rig and guess what... it is an 1366 socket Rampage III board with an 980X. I think this has to do with psychology. Once you have touched 6th level in the direction of the crunchers Nirvana, it is very difficult to go down two levels.
    I undertsand completely and in your position I'd do the same.
    Quote Originally Posted by Jupiler View Post
    Sorry mate, but she's on a diet, starting tomorrow.
    Never seen a woman turn down a 3-5lb New England Lobster with a piece of prime rib sitting beside it..
    Crunch with us, the XS WCG team
    The XS WCG team needs your support.
    A good project with good goals.
    Come join us,get that warm fuzzy feeling that you've done something good for mankind.

    Quote Originally Posted by Frisch View Post
    If you have lost faith in humanity, then hold a newborn in your hands.

  17. #117
    Xtreme Legend
    Join Date
    Mar 2008
    Location
    Plymouth (UK)
    Posts
    5,279
    Is that how you think of yourself now? .......Prime rib!!


    My Biggest Fear Is When I die, My Wife Sells All My Stuff For What I Told Her I Paid For It.
    79 SB threads and 32 IB Threads across 4 rigs 111 threads Crunching!!

  18. #118
    V3 Xeons coming soon!
    Join Date
    Nov 2005
    Location
    New Hampshire
    Posts
    36,363
    Quote Originally Posted by OldChap View Post
    Is that how you think of yourself now? .......Prime rib!!
    Very good!
    Had to read it twice to get the meaning!
    And no, at this point in life I'm closer to the old tough gristle..
    Crunch with us, the XS WCG team
    The XS WCG team needs your support.
    A good project with good goals.
    Come join us,get that warm fuzzy feeling that you've done something good for mankind.

    Quote Originally Posted by Frisch View Post
    If you have lost faith in humanity, then hold a newborn in your hands.

  19. #119
    I am Xtreme
    Join Date
    Dec 2008
    Location
    France
    Posts
    9,060
    Quote Originally Posted by OldChap View Post
    Is that how you think of yourself now? .......Prime rib!!

    That's brilliant!
    Sorry, Dave.
    Donate to XS forums
    Quote Originally Posted by jayhall0315 View Post
    If you are really extreme, you never let informed facts or the scientific method hold you back from your journey to the wrong answer.

  20. #120
    Xtreme Cruncher
    Join Date
    Oct 2007
    Posts
    1,638
    Quote Originally Posted by EtaCarinae View Post
    Once you have touched 6th level in the direction of the crunchers Nirvana, it is very difficult to go down two levels.
    In that case why not step up to the 12th circle? SR-2

    And I also agree, quads are to passé these days. We want more cores
    XTREMESupercomputer: Phase 2
    Live up to your name - November 1 - 8
    Crunch with us, the XS WCG team

  21. #121
    Xtreme Enthusiast
    Join Date
    Mar 2010
    Location
    Minnesota
    Posts
    587
    Hey Dave, sounds like SB is doing you well. Ready to part with those Hexes yet?

  22. #122
    Xtreme Member
    Join Date
    Mar 2010
    Posts
    368
    Quote Originally Posted by trn View Post
    In that case why not step up to the 12th circle? SR-2

    And I also agree, quads are to passé these days. We want more cores
    Yessss. More cores, more cores, more cores.......

    P.S. Two single socket Hex units (based on OCed 980Xs ) are more performant than one SR2 unit. I compared that in detail with Dave some time ago (see Dave's thread on SR2 rig) and there is no discussion about it. Dave loves dualies, I am more pragmatic, and only absolute performance counts.
    [SIGPIC][/SIGPIC]

  23. #123
    I am Xtreme
    Join Date
    May 2007
    Location
    Massachusetts
    Posts
    1,285
    Crunch Crunch Crunch....that is all Crunch for a Cure
    [SIGPIC]http://i1007.photobucket.com/albums/af195/wcgsig/566162.gif[/SIGPIC]

  24. #124
    Xtreme Cruncher
    Join Date
    Oct 2007
    Posts
    1,638
    Quote Originally Posted by EtaCarinae View Post
    Yessss. More cores, more cores, more cores.......

    P.S. Two single socket Hex units (based on OCed 980Xs ) are more performant than one SR2 unit. I compared that in detail with Dave some time ago (see Dave's thread on SR2 rig) and there is no discussion about it. Dave loves dualies, I am more pragmatic, and only absolute performance counts.
    SRHunt3r does average 15,200 with an SR-2 rig and thats not to shabby if a dualie does avg less then it's not going to be by very much. I wont pay the dual QPI Xeon "tax" for a dedicated cruncher myself.

    Quote Originally Posted by CaptMorgan View Post
    Crunch Crunch Crunch....that is all Crunch for a Cure
    Crunch Crunch Crunch? That's my line
    XTREMESupercomputer: Phase 2
    Live up to your name - November 1 - 8
    Crunch with us, the XS WCG team

  25. #125
    Worlds Fastest F5
    Join Date
    Aug 2006
    Location
    Room 101, Ministry of Truth
    Posts
    1,615
    Well you know what they say about taxes

    (well apart from the life's certainties bit, anyway)
    X5670 B1 @175x24=4.2GHz @1.24v LLC on
    Rampage III Extreme Bios 0003
    G.skill Eco @1600 (7-7-7-20 1T) @1.4v
    EVGA GTX 580 1.5GB
    Auzen X-FI Prelude
    Seasonic X-650 PSU
    Intel X25-E SLC RAID 0
    Samsung F3 1TB
    Corsair H70 with dual 1600 rpm fan
    Corsair 800D
    3008WFP A00



Page 5 of 9 FirstFirst ... 2345678 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •