You should've asked around, man. Or were you too nervous to meet with your fellow forum members, huh?Originally Posted by ProStreetCamaro
You should've asked around, man. Or were you too nervous to meet with your fellow forum members, huh?
Asus Rampage II Gene, Xeon W3550 D0 Mushkin PC3-2000 6GB, BFG 9600GT OC 512MB DDR3
Asus A8N32-SLI Deluxe 1.01G, AMD A64 4000+, 2x1GB Ultra PC-3200, EVGA 7600GT 256MB DDR3
Asus MA378-T with AMD Athlon 64 X2 7850
ECS 945GCT-M/1333 v3.0, Intel Celeron E1400, MSI 8500GT 256MB DDR3
BIOStar P4M900-M7 Rev. 7.0, Intel Celeron 440, 1GB Kingston, 6600LE
Gigabyte M61PME-S2P with AMD Athlon 64 LE-1660, EVGA 8500GT 1GB DDR2
Congrats to everyone who managed to get one, my store had a massive fight which was really funny to watch. Just reformatted drive and now loading op then drivers as we speak.
Just got back from Microcenter. Bought the Asus P8P67 Deluxe and a 2500k (I game so I don't use hyperthreading anyway), the batch is L040B354. From a few threads on other forums I have gathered that L040B is a better batch than L041B.
Last edited by babalouj; 01-09-2011 at 11:35 AM.
**Georgia Tech Grad, I am an Electrical Engineer with a specialization in RF IC design and Analog circuits.**
Intel I7 3770K Delidded
Gigabyte Z77X-UD5H
2x4gb Gskill 7-8-7-16
EVGA GTX680 Signature OC
Crucial M4 256gb
Seasonic X-750
Watercooling Loop: Raystorm Acetal, EK GTX580 Full Cover, MCR420, MCR320, MCP35X2 & 7 x AP-15 Gentle Typhoons
Heatware: gte460z
Ouch, no overclocking for you :/ Good that you got a processor though. I drove 40 minutes to MC, got there right as it opened and there were already 30 people ahead of me. MC staff didnt say anything till I was right at the front and then mentioned "oh we dont have the 2500k or 2600k in stock". They had only got five 2600k's and ten 2500k's in stock...Just came home frome rockville. good that i reserved one. I could just pick it up easily
Other people weren't that happy. Because without a reservation it was hard to get one!
My batch: L041B410
Rig 1:
ASUS P8Z77-V
Intel i5 3570K @ 4.75GHz
16GB of Team Xtreme DDR-2666 RAM (11-13-13-35-2T)
Nvidia GTX 670 4GB SLI
Rig 2:
Asus Sabertooth 990FX
AMD FX-8350 @ 5.6GHz
16GB of Mushkin DDR-1866 RAM (8-9-8-26-1T)
AMD 6950 with 6970 bios flash
Yamakasi Catleap 2B overclocked to 120Hz refresh rate
Audio-GD FUN DAC unit w/ AD797BRZ opamps
Sennheiser PC350 headset w/ hero mod
I just got home from the Microcenter in Richardson, Texas. I have the same batch as you (L039B214). I did not pick up a motherboard yet. Do you know what "revision" your batch is.. Basically, I'm just curious if all of the 2600K's share the same D1 revision?
Intel i7 2600K (under a Prolimatech Megahalems)
GSkill DDR3-1600mhz 7-8-7-24 / 2x4gb
Enermax Galaxy 1000w Gamers Edition PSU
Motherboard - ? ...maybe a MSI P67-GD65
XFX GTX260 216 BLACK EDITION
WD 640gb HDD
Antec Nine Hundred Two
RCA 55" 240hz 1080P Monitor
Logitech G5 v2 Mouse
SPDIF (Pioneer VSX-D411) 5.1+1 surround sound
awesome Nub soon as you get up , get us some picture i wanna see what these babies can do with a experienced overclocker
Being Tweaked
ASUS Maximus V Forumla Bios 1408
Intel Ivy Bridge 3770k UNLIDDED
4.8 ghz EK Supreme HF Block 1.38v
Dominator Platinum 2666MHz 11-13-13-35
EVGA Titan eK bLOCK
Corsiar AX850W
Samsung 840 Pro 256GB C:/ OS
Samsung 840 Pro 512GB D:/ Game:
Western Digital Black WD4001FAEX 4TB 7200 RPM 64MB E:/ Data
Western Digital Black WD4001FAEX 4TB 7200 RPM 64MB F:/ Data
X-Fi Titanium Fatal1ty
Windows 7 PRO 64bit SP1
My Civ 5 + i7 2600K + P8P67 Pro combo is shipped/has tracking from TigerDirect ($499+13 ship 2-day air), should be here wednesday at the latest, possibly tuesday if their shipment center it's coming from is close to me
Disregard - I was up too early and my memory was / still is bad lol (bad sleeping for the loose)
Last edited by TheGoat Eater; 01-09-2011 at 08:56 PM.
Retails should all be D2 stepping..
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
Ya D2
Damn i also realized that they gave me the 2600 and not the 2600k. So i went back and of course they where out of the 2600k. So i just bought the 2500k and gote the money back for the 2600. I was really unhappy
Man, I feel for ya, Buddy. I had a user paying me to go and get him a Bundle of 2500K with Asus Pro version, but the Pro was OOS! Ouch!!! Web orders got them all. I felt so bad that I wasn't able to get what he wants.
However, he decided to just get a CPU now and the motherboard later. So, I got him an L040B batch. Had he posted this thread earlier on Saturday, we would have accomplished what we needed to.
Last edited by jcniest5; 01-09-2011 at 04:41 PM.
Asus Rampage II Gene, Xeon W3550 D0 Mushkin PC3-2000 6GB, BFG 9600GT OC 512MB DDR3
Asus A8N32-SLI Deluxe 1.01G, AMD A64 4000+, 2x1GB Ultra PC-3200, EVGA 7600GT 256MB DDR3
Asus MA378-T with AMD Athlon 64 X2 7850
ECS 945GCT-M/1333 v3.0, Intel Celeron E1400, MSI 8500GT 256MB DDR3
BIOStar P4M900-M7 Rev. 7.0, Intel Celeron 440, 1GB Kingston, 6600LE
Gigabyte M61PME-S2P with AMD Athlon 64 LE-1660, EVGA 8500GT 1GB DDR2
5am this morning on microcenter site I pre-ordered my motherboard, but at the time i couldn't pre-order any SB cpus...
Good thing, in a sense, 2600k were sold out, or i wouldn't of listened to logic of saying save $100 go with 2500k
Of course I saw dozen or so 2600k at the pickup area
Motherboard: GigaByte P67UD4 f6 | CPU: Intel 2500k 4.5ghz 1.26v | Memory: GSkill 2x4gb @ 1600mhz 1.34v | PSU: SeaSonic X650 Gold 650W | Video: AMD 6970 Koolance water block 880c/1450mem 1.035v | HDD: WD 640gb cavier black: VelociRaptor 300gb: Intel x-25 g2 80gb | Sound: Asus xonar D1 | OS: W7 64bit
Anybody got a quick-early-list of good 2006k batch# ?
So far, I got this list:
L040B225 , benchstable at 5.2 - 5.3GHz (depends on bench) @ air
but would like to have more on the list.
Last edited by Sam_oslo; 01-09-2011 at 04:49 PM.
► ASUS P8P67 Deluxe (BIOS 1305)
► 2600K @4.5GHz 1.27v , 1 hour Prime
► Silver Arrow , push/pull
► 2x2GB Crucial 1066MHz CL7 ECC @1600MHz CL9 1.51v
► GTX560 GB OC @910/2400 0.987v
► Crucial C300 v006 64GB OS-disk + F3 1TB + 400MB RAMDisk
► CM Storm Scout + Corsair HX 1000W
+
► EVGA SR-2 , A50
► 2 x Xeon X5650 @3.86GHz(203x19) 1.20v
► Megahalem + Silver Arrow , push/pull
► 3x2GB Corsair XMS3 1600 CL7 + 3x4GB G.SKILL Trident 1600 CL7 = 18GB @1624 7-8-7-20 1.65v
► XFX GTX 295 @650/1200/1402
► Crucial C300 v006 64GB OS-disk + F3 1TB + 2GB RAMDisk
► SilverStone Fortress FT01 + Corsair AX 1200W
I will post results as soon as possible. Went with the overnight shipping, so if snow doesnt screw up the delivery time I hope to have it running Tuesday night.awesome Nub soon as you get up , get us some picture i wanna see what these babies can do with a experienced overclocker
I will feel like real nub again on a new platform.
What a good deal.
How can you go wrong for $339.
Last edited by Forsaken1; 01-09-2011 at 05:06 PM.
I7-2600K D2 : batch: L039B214
So far, bench stable at:
Multi: 46x
BCLK: 99.8 Mhz
Vcore BIOS: 1.40
Vcore Idle: 1.380
Vcore Load: 1.308
Max core (#1) @ 65c on air.
Last edited by ugotd8; 01-09-2011 at 05:18 PM. Reason: Add revision
I7-3930K @ 4.8Ghz (1.35) / R4E / 16GB Samsung LV @ 2133 (1.38V) / Crucial M4 128GB / Caviar Black 1TB / HD6850 / Corsair AX850 / MCP355->RX360->SR1-360->XSPC Raystorm->EK-R4E-LE / DD Double-Wide Horizontal
try flashing to this bios http://www.fileden.com/files/2009/12...p67aud4.6x.zip
and look at this video for OC setup. If you use LLC1 you should be getting the same volts in windows.
Also enable PLL override in CPU settings
http://www.youtube.com/watch?v=8ngyUrjuQ80
I am having a strange issue maybe somebody could help me out. I have the UD5 and 2600K and am sitting here linx stable at 4.5 on 1.25 volts. As soon as I choose anything over X45 multi it just keeps rebooting at the screen to hit delete to enter bios. I am on the latest beta bios you linked.
do you have a retail CPU or D1 ES?
Retail
EDIT: Wait i just noticed that file you linked is F5e and i am running F5a. Does that make a difference?
Try F5x and enable PLL Voltage Override
http://www.fileden.com/files/2009/12...p67aud5.5x.zip
also use Loadline Calibration Level1!
Sweet! That did it! I owe you one
Sitting here linx stable so far at 5.0 and 1.4V maxxing out at 62c and idle at 27c
Last edited by ProStreetCamaro; 01-09-2011 at 07:17 PM.
Nice!
Seems to be that u got a good batch...
@ air?
Sam you should start a thread when you can find out more results using different batches, Would be good for comparison..
Another thing I find funny is AMD/Intel would snipe any of our Moms on a grocery run if it meant good quarterly results, and you are forever whining about what feser did?
Posting Permissions
Reply With Quote
Bookmarks