new toys: 1090t (4.25ghz blend stable), chIVformula, supertalent hypers, g.skill SSD

[Zeus]

Very nice man. A second 5850 will get you 27K or close to that. The only test in 06 that benefit from crossfire is Canyon flight. Nice to see a single GPU card almost matching a dual GPU card but i actually already knew that from comparing my 2x 5870 scores to theoldtimers 2x 4870x2's.

Looking forward to pics of your build, gonna rebuild mine soon as well. Red tubing!

[crazydiamond]

haha dave, lmao @ computers annonymous!! i think i will probably see you there!

zeus: i should be getting a few more things for my case in the next few days, including both red & black tubing thats what happens when i cant decide lol i think this weekend i will try to get done what i can and get some pics up, and as usual there will still be some other stuff im planning on doing but will have to wait for a bit. i gotta say its looking pretty nice w/ the 5850 in there right now though cant wait till i can get another

[[XC] Oj101]

I've seen windows XP loading at 6+G on an E8600 and Rampage Extreme with a SSD and windows loading time was stunning, if i had to estimate i would say less than 10 seconds, maybe about 7-8secs.

My benching XP loads in about three seconds (about 1/2 a pass of the blue blocks) from a standard hard drive, that must've been a filthy install

*****************************

Nice setup you've got there, when are you going to show us what the RAM can REALLY do?

[Lightman]

Sweet Leo rig Crazydiamond

Clocks are awesome on your CPU sample! Can you please try ArunaRT benchmark for me? Just break 6000 and I will be happy

[crazydiamond]

Nice setup you've got there, when are you going to show us what the RAM can REALLY do?

hopefully this can hold you over for a bit, 1766 c6

Sweet Leo rig Crazydiamond

Clocks are awesome on your CPU sample! Can you please try ArunaRT benchmark for me? Just break 6000 and I will be happy

got a link for that?

[BeepBeep2]

Look in the Xtreme benchmark section.

How about 6-6-6? I can do 1766 6-6-6 32M if I feed them 1.73v :P

Lets see what that 1090T can do CAS 7

[Lightman]

...

got a link for that?

Sure!

Thread - http://www.xtremesystems.org/forums/...d.php?t=242688

Score to beat - http://www.xtremesystems.org/forums/...9&postcount=71

Shouldn't be a problem to beat simple air cooling for you, but at least we will make mAJORD happy

[crazydiamond]

lightman ill do the bench tonight when i get back..

here u go dave, im goin down to the lake to throw the frisbee for a bit but i will test some more tonight or tomorrow

315htt on 1066 divider - 45min blend - 325 kept erroring out for me (photobucket takes a bit to resize :/ )


bios settings (i kinda worked assbackwords and set them all high to begin with so if they work for your hardware ill let you test & find out which ones can go lower )


335 on 800 divider - 45min blend - stopped here cuz im leavin now, ill see how high it can go later


bios

[Titan7171]

sweet scores CrazyDiamond

When you get a chance run vantage!

[crazydiamond]

no problem titan, will run it soon

here you go lightman, 6145 (click for 1900x1200)

[Lightman]

no problem titan, will run it soon

here you go lightman, 6145 (click for 1900x1200)

Now we are talking
Water is better than air then

Now just post that in Aruna thread so broader audience can see your effort!

THANKS!

[Daveburt714]

here u go dave, im goin down to the lake to throw the frisbee for a bit but i will test some more tonight or tomorrow

Thanks CrazyD! Thats better than I've been able to get so far (~305), I'll try your subvoltages when I get home from work...

[FlanK3r]

Lightman: for few days i can try run higher than Crazy Diamont (AIR must wining :-D ). Is this bench harder than Cinebench? If not, 4400 MHz will not big problem :-)

[crazydiamond]

Look in the Xtreme benchmark section.

How about 6-6-6? I can do 1766 6-6-6 32M if I feed them 1.73v :P

Lets see what that 1090T can do CAS 7

when are you going to show us what the RAM can REALLY do?

here you go beep & Oj101, idk how much is left in them at c6 but this is a little better for ya on this new 0905 bios im having problems getting into windows with 1900mhz + memory speed w/ c7 or c8 not sure whats up, i got that 1960mhz c7 1m up there so i know the ram can do it

1774mhz c6

[BeepBeep2]

Voltage? :P Me's sticks don do dat.

[crazydiamond]

same as 1766 run, 1.725 in bios but i thnk it overvolts to 1.733

[BeepBeep2]

Looks like I've got some tweaking to do

EDIT: Sorry for the hijack:
Pretty hard for me to compete with Thuban...especially on $20 air

[Mtemel]

Wow nice new toys indeed crazyd! gratz mate and nice results to boot!! really nice rig

[crazydiamond]

thanks Mtemel ive been loving it so far

updated OP with some short 30 min. prime runs to get a better idea on how much vcore i need @ diff mhz.... im not saying these are 100% stable but it gives a good idea of how much vcore certain mhz need at load & can prolly be fine tuned very close to this to get it 100% stable

4300mhz - 1.57v @ load (1.528 bios, llc on) - win7 64bit - 72f ambients - water in sig


4280mhz - 1.55v @ load (1.508 bios, llc on) - win7 64bit - 72f ambients - water in sig

[BeepBeep2]

Crazy amounts of heat that thing puts out. ~55c ! Nice clocks too...

[crazydiamond]

thanks beep these things do put out crazy heat for sure. i think with x4 a 2x120 rad is enough but with x6 3x120 helps even more. i also turned my rear fans on 1x120 rad around so they are bringing in fresh air from outside the case instead of exhausting warmer case air out the back, and to help with the added intake fans, i added another 140mm hole on roof for another exhaust

[crazydiamond]

sorry for double post but added a few new rig pics to OP.. still got a few small things that need to be done but had a chance to rebuild my loop finally & do a few other small things to my case the last few days so its shaping up

[Daveburt714]

thanks beep these things do put out crazy heat for sure. i think with x4 a 2x120 rad is enough but with x6 3x120 helps even more.

Hey CrazyD, so you noticed alot higher heatload too? Glad it's not just me...

The good thing is my X6 OC's better with lower V's, but it still creeps up over time under stress. I've got a Thermochill 120 and a Swiftech 120.3 in my loop.
I think I'm going to pick up a Swiftech tripple (Stacker) this weekend and see if it helps... I'll let ya know!

Awesome clocks man, not sure my chip is that good...
I'm thinking I may need to lap my IHS, cause temps hit ~54c after 30 minutes Prime Blend even though voltage is only around 1.5 on the core.

EDIT: BTW, beautiful rig!

[luf1c3r]

Very neat crazy

[Barr3l Rid3r]

needs better vga cooler now or put it in the loop