OC Report - G.SKILL Perfect Storm F3-16000CL8T - simply PERFECT

**WaterFlex** · 08-09-2009, 06:15 AM

Very perfect RAM indeed

**eva2000** · 08-09-2009, 06:16 AM

Originally Posted by hiwa

GSKILL like all other manufacturies decided to stop sell them

as you know for Hyper problems and high percent rma

we will wait new series of elpida

sad indeed

hope they sort it out though

**zalbard** · 08-09-2009, 06:44 AM

Originally Posted by eva2000

sad indeed

hope they sort it out though

Wasn't there a post saying that Corsair together with Elpida found and sorted the problem? Like a few weeks ago.

**eva2000** · 08-09-2009, 06:49 AM

Originally Posted by zalbard

Wasn't there a post saying that Corsair together with Elpida found and sorted the problem? Like a few weeks ago.

well corsair sorted out their products.. hoping other manufacturers do too instead of replacing elpida hyper with other ics heh

**hiwa** · 08-09-2009, 08:39 AM

Originally Posted by eva2000

sad indeed

hope they sort it out though

i hope so,and i am sure GSKILL will sort it soon

**bigx333** · 09-29-2009, 06:06 PM

They are back on newegg, i hope that is the new batch of hyper

**stasio** · 09-29-2009, 08:28 PM

212 Euros in Memoryc
http://www.memoryc.com/products/desc...fan/index.html

**DashTrash** · 10-06-2009, 06:40 AM

Just bought a set of these. Should be here today. RIIE on backorder from dell business. About 2 1/2 weeks until I can try them out. Got them from the egg.

**primer** · 10-07-2009, 11:55 PM

Originally Posted by clone38

Cant make my mind up these or the new corsair gt`s.

I'm confused too .... this or the Dominator GTs

**mrcape** · 10-15-2009, 10:37 AM

Ordered 2 of these kits and will test next week. I am betting they are new hypers.

**radaja** · 10-16-2009, 01:33 AM

mrcape,please keep us posted on you new ram.very curious
as to how these new one will do.so after you test post you results.ok?
thanks

**mrcape** · 10-16-2009, 12:17 PM

No problem, just give me a week or so I had to swap out my classified and it will be back on Mon.

edit - Had a wedding to attend so still not set up, but will this later week.

**mrcape** · 10-27-2009, 06:37 PM

Here's a quick test of 1st kit -

Classified 760

4ghz/1900mhz/7-7-7-21 vDimm - 1.62v(bios) 1.65v (DMM idle) 1.635v (DMM load)

4.2ghz/2000mhz/7-7-7-21 vDimm - 1.62v(bios) 1.65v (DMM idle) 1.635v (DMM load)

What settings do you want to see?

**mrcape** · 10-27-2009, 07:46 PM

Some 12GB -

Classified 760

4.2ghz/2000mhz/8-8-8-21 vDimm - 1.62v(bios) 1.65v (DMM idle) 1.635v (DMM load)

4ghz/2000mhz/8-8-8-21 vDimm - 1.62v(bios) 1.65v (DMM idle) 1.635v (DMM load)

Just quick tests my 1st afternoon playing with i7 and classified. I love these handy voltage pads! Will try to add tighter timings and linx for 12gb asap. Or if you want any specific test to compare let me know.

**mrcape** · 11-21-2009, 03:41 PM

More info -

System:

Intel Xeon 3520 3910A724
Koolance 350/XSPC 420/EK Full Cover/MCR 320res
EVGA Classified 760
GSkill F3-16000CL8T-6GBPS x 2
EVGA GTX295
Intel M25-X G2 160gb
Corsair HX1000 PSU
Win7 Ultimate 64bit RTM

**FireDragon** · 12-03-2009, 08:59 AM

These Hypers r insane sticks except for there deaths, nice clocks on the 12gb there, gl with keeping all of yours alive, lol

Dragon

PS. LOVE the 1t 12gb cas 6!!!

**mrcape** · 12-06-2009, 07:22 PM

Hi, I haven't seen any reports of MGH-E dying, just the older MNH-E.

**jasae74** · 12-14-2009, 01:58 PM

Hi i would like to know bios settings for 7-7-7-21 1.68v 2000mhz

Motherboard: Asus p6t deluxe v2
i920 d0

Regards!

**FireDragon** · 12-16-2009, 10:38 AM

Yeah lol i have looked a lot into the hypers since then, as i have a kit otw for my new build, it seem the MGH-E r TANKS lol, not like the old fragile ones that its not if there gunna die but when, batch of MHN-E s

Dragon

**jasae74** · 12-17-2009, 02:32 PM

Which Qpi/dram would be neccesary for 7-7-7-21 1N 1.68V 2000mhz?

Regards!

**mrcape** · 12-17-2009, 04:27 PM

Depends on your HW, but my 3520 needs around 1.42v CPU VTT and 1.64v DRAM both measured with DMM. And that is 12GB @ 7-7-7-18. But that is not stable for much more than 1m or sth. You would need to jack DRAM and VTT up for more action. 1000mhz with trcd 7 is not very common way to run, 8 is a much different story.

**jasae74** · 12-24-2009, 07:21 AM

Could you give me full bios settings?

I have asus p6t deluxe2

Regards

**westsider** · 12-26-2009, 07:14 PM

the same g skills
i thought they were BBSE

**westsider** · 03-11-2010, 01:52 PM

2540MHz
http://valid.canardpc.com/show_oc.php?id=1069741

perfect stroms rock

**DashTrash** · 09-15-2010, 06:34 AM

Reviving an old thread for a few questions. I was wondering if any of you who ran this ram for a while with high vtt (1.45v+) suffered any degredation of the IMC? With 12gb of this stuff, if I can get it to do it, it will likely need 1.5vish vtt. I need the cpu to last until at least sandy bridge comes out. Have you been running many months at high vtt with no change in required volts? Mine is watercooled. Also, do the Xeon IMC's (45nm) do better than the i7 line, meaning can get higher memory speed with less volts? Thanks!

Thread: OC Report - G.SKILL Perfect Storm F3-16000CL8T - simply PERFECT

Thread Tools

Search Thread

Rate This Thread

Display

Bios settings?

Qpi?

bios settings

Bookmarks

Bookmarks

Posting Permissions