Page 1 of 2 12 LastLast
Results 1 to 25 of 46

Thread: Strong retail Clarkbar :)

  1. #1
    World Champion - IRONMODS
    Join Date
    Sep 2007
    Location
    Northern Japan
    Posts
    2,029

    Strong retail Clarkbar :)

    Back from vacation, and I just had my first benching session last night...feels good

    Retail CPU at -145C or below, on a P55A-UD7

    When I first tested this CPU on the UD3R, I had cold bug at about -164C. First test on the UD7 proved to be about the same. On the final run I was running full pot and found zero CB ...the only thing that changed was an update to F4 BIOS CBB at -120 to -135C depending on Vcore

    CPU clocks are strong, but this thing has to have the weakest DMI bus on the planet, any setting over x12 fails to post
    update - figured out my DMI problems, see the updates

    First Run (latter scores were better):



    Updated scores:









    Last edited by miahallen; 08-02-2010 at 01:30 PM.
    Quote Originally Posted by Massman
    My definition of 'efficient' is 'it does not suck monkeyballs'. Yes, I set bars low.
    [CENTER]The post counter is not an intelligence meter!

    MAX11L - "It's like a console...with the suck turned down and the awesome turned up" -tet5uo
    Heat Team IRONMODS

  2. #2
    Xtreme Addict
    Join Date
    Aug 2007
    Location
    Greece
    Posts
    1,692
    Nicely done miah, 6.7GHz retail chip is definitely something

    Do you think that there's room for improvement ?

  3. #3
    Champion
    Join Date
    May 2006
    Location
    Bangkok, Thailand
    Posts
    1,375
    nice start miahallen and nice chip too, congrats bro
    Sorry For My English
    OverclockZone Team
    THAILAND

  4. #4
    Admin
    Join Date
    Dec 2003
    Location
    Hillsboro, OR
    Posts
    5,225
    Nice job Miah, esp considering the qpi bottleneck

  5. #5
    -_-
    Join Date
    Sep 2006
    Location
    ATLanta, Ga.
    Posts
    516
    very nice work Mia
    Quote Originally Posted by Gautam View Post
    I'll add my name to this elpida graveyard as soon I even think about running 32M. (yes, the thought is enough)



  6. #6
    PI in the face
    Join Date
    Nov 2008
    Posts
    3,083
    looks like you have the opposite of me! Mine maxes 6.35ghz for spi1m but 5.1qpi

    Im jealous!
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	pf670.jpg 
Views:	1355 
Size:	182.7 KB 
ID:	101820  
    Quote Originally Posted by L0ud View Post
    So many opinions and so few screenshots

  7. #7
    World Champion - IRONMODS
    Join Date
    Sep 2007
    Location
    Northern Japan
    Posts
    2,029
    Thanks guys....if I can get the top secret BIOS with special sauce from hicookie...there may be some room for improvement...but unless I can figure out how to get this darn DMI running faster, the improvement will be minimal
    Quote Originally Posted by Massman
    My definition of 'efficient' is 'it does not suck monkeyballs'. Yes, I set bars low.
    [CENTER]The post counter is not an intelligence meter!

    MAX11L - "It's like a console...with the suck turned down and the awesome turned up" -tet5uo
    Heat Team IRONMODS

  8. #8
    Xtreme Member
    Join Date
    Sep 2007
    Location
    The Netherlands
    Posts
    281
    6.7GHz retail chip thats good



    OVERCLOCK TEAM HOLLAND

    http://www.overclocking-holland.nl/

  9. #9
    Xtreme Member
    Join Date
    Aug 2007
    Location
    UK
    Posts
    247
    Nice clocks mia i hope you can get better qpi as then some nice scores will be on the cards

  10. #10
    Xtreme Enthusiast
    Join Date
    Mar 2006
    Location
    Hastings, England
    Posts
    825
    very nice congrats
    Quote Originally Posted by jayhall0315 View Post
    If you are really extreme, you never let informed facts or the scientific method hold you back from your journey to the wrong answer


  11. #11
    World Champion - IRONMODS
    Join Date
    Sep 2007
    Location
    Northern Japan
    Posts
    2,029
    Thanks guys

    I had 4L left over from the other night....just enough to figure out my DMI problems





    Quote Originally Posted by Massman
    My definition of 'efficient' is 'it does not suck monkeyballs'. Yes, I set bars low.
    [CENTER]The post counter is not an intelligence meter!

    MAX11L - "It's like a console...with the suck turned down and the awesome turned up" -tet5uo
    Heat Team IRONMODS

  12. #12
    PI in the face
    Join Date
    Nov 2008
    Posts
    3,083
    what did you change, nice work!
    Quote Originally Posted by L0ud View Post
    So many opinions and so few screenshots

  13. #13
    World Champion - IRONMODS
    Join Date
    Sep 2007
    Location
    Northern Japan
    Posts
    2,029
    the multi

    I was reading elsewhere hicookie saying that the chips are finicky and only like some multies....he was right
    Quote Originally Posted by Massman
    My definition of 'efficient' is 'it does not suck monkeyballs'. Yes, I set bars low.
    [CENTER]The post counter is not an intelligence meter!

    MAX11L - "It's like a console...with the suck turned down and the awesome turned up" -tet5uo
    Heat Team IRONMODS

  14. #14
    Xtreme Addict
    Join Date
    Aug 2007
    Location
    Greece
    Posts
    1,692
    Glad you got over that problem miah! Now let's see this chip fly sky-high

  15. #15
    World Champion - IRONMODS
    Join Date
    Sep 2007
    Location
    Northern Japan
    Posts
    2,029
    Quote Originally Posted by miahallen View Post
    if I can get the top secret BIOS with special sauce from hicookie...there may be some room for improvement
    Got it Will try again next week
    Quote Originally Posted by Massman
    My definition of 'efficient' is 'it does not suck monkeyballs'. Yes, I set bars low.
    [CENTER]The post counter is not an intelligence meter!

    MAX11L - "It's like a console...with the suck turned down and the awesome turned up" -tet5uo
    Heat Team IRONMODS

  16. #16
    Xtreme Enthusiast
    Join Date
    Apr 2007
    Location
    Germany
    Posts
    568
    Nice mate.... Some problems with CB because higher QPI?
    But nice improvements

  17. #17
    World Champion - IRONMODS
    Join Date
    Sep 2007
    Location
    Northern Japan
    Posts
    2,029
    No, actually...CBB got better , I cold booted down to -150C no problem...my first session forced me to boot at -120C or warmer
    Quote Originally Posted by Massman
    My definition of 'efficient' is 'it does not suck monkeyballs'. Yes, I set bars low.
    [CENTER]The post counter is not an intelligence meter!

    MAX11L - "It's like a console...with the suck turned down and the awesome turned up" -tet5uo
    Heat Team IRONMODS

  18. #18
    Moderator
    Join Date
    Nov 2006
    Posts
    2,609
    nice runs mia and good retail chip
    Quote Originally Posted by LardArse View Post
    i think you are asking the wrong person about safety limits, but

  19. #19
    World Champion - IRONMODS
    Join Date
    Sep 2007
    Location
    Northern Japan
    Posts
    2,029
    Thanks hiwa...now if I could only get access to the ES chips you guys play with........

    That 32M run is highest retail Clarkdale according to the bot
    Last edited by miahallen; 08-02-2010 at 12:47 AM.
    Quote Originally Posted by Massman
    My definition of 'efficient' is 'it does not suck monkeyballs'. Yes, I set bars low.
    [CENTER]The post counter is not an intelligence meter!

    MAX11L - "It's like a console...with the suck turned down and the awesome turned up" -tet5uo
    Heat Team IRONMODS

  20. #20
    Moderator
    Join Date
    Nov 2006
    Posts
    2,609
    Quote Originally Posted by miahallen View Post
    Thanks hiwa...now if I could only get access to the ES chips you guys play with........

    That 32M run is retail Clarkdale WR according to the bot
    i play retail too all my 3ds done with retail chip
    Quote Originally Posted by LardArse View Post
    i think you are asking the wrong person about safety limits, but

  21. #21
    Xtremely Bad Overclocker
    Join Date
    Jan 2005
    Location
    East Blue
    Posts
    3,596
    good to see it can do high QPI also was it related to cold or how could you sort it out?
    btw 6.500s flat low clock challenge anyone?! (done on MIIIF)

    | '12 IvyBridge - "ticks different"... | AwardFabrik IvyBridge round I by SoF | AwardFabrik IvyBridge round II by angoholic & stummerwinter
    | '11 The SandyBridge madness... | AwardFabrik / Team LDK OC-Season 2011/2012 Opening Event
    | '10 Gulftown LaunchDay OC round up @ASUS RIIE | 3DM05 2x GPU WR LIVE @Cebit 2010 @ASUS MIIIE | SandyBridge arrived @ASUS P8P67

    | '09 Foxconn Avenger | E8600 | Foxconn A79A-S | Phenom II 940 BE | LaunchDay Phenom II OC round up
    | '08 7.438s 1m LN2 | AMD 1m WR LN2 | 2nd AOCM | Phenom II teasing
    | '07 100% E2140 | 106.5% E2160 | 100% E4500 | 103% E4400 | 5508 MHZ E6850 | 7250 MHZ P4 641 126.5% by SoF and AwardFabrik Crew all on Gigabyte DS3P c? and LN2...
    | '06 3800+ X2 Manchester 0531TPEW noHS 3201MHZ c? | 3200+ Venice noHS 3279MHZ c? | Opteron 148 0536CABYE 3405MHZ c? all on Gigabyte K8NXP-SLI compressorcooled

    | '05 3500+[NC], 3000+[W], 2x 3200+[W], 3500+[NC], 3200+[V] 0516GPDW

    Quote Originally Posted by saaya
    sof pulled a fermi on all of us !!!

  22. #22
    World Champion - IRONMODS
    Join Date
    Sep 2007
    Location
    Northern Japan
    Posts
    2,029
    Saw that before...nice eff

    My SPI eff has never been great
    Quote Originally Posted by Massman
    My definition of 'efficient' is 'it does not suck monkeyballs'. Yes, I set bars low.
    [CENTER]The post counter is not an intelligence meter!

    MAX11L - "It's like a console...with the suck turned down and the awesome turned up" -tet5uo
    Heat Team IRONMODS

  23. #23
    Xtreme Member
    Join Date
    Aug 2007
    Location
    UK
    Posts
    247
    Glad to see you got it sorted waiting for scores

  24. #24
    Xtremely Bad Overclocker
    Join Date
    Jan 2005
    Location
    East Blue
    Posts
    3,596
    with a bit higher bclk I am sure you will match me win xp sp3 or server one?
    | '12 IvyBridge - "ticks different"... | AwardFabrik IvyBridge round I by SoF | AwardFabrik IvyBridge round II by angoholic & stummerwinter
    | '11 The SandyBridge madness... | AwardFabrik / Team LDK OC-Season 2011/2012 Opening Event
    | '10 Gulftown LaunchDay OC round up @ASUS RIIE | 3DM05 2x GPU WR LIVE @Cebit 2010 @ASUS MIIIE | SandyBridge arrived @ASUS P8P67

    | '09 Foxconn Avenger | E8600 | Foxconn A79A-S | Phenom II 940 BE | LaunchDay Phenom II OC round up
    | '08 7.438s 1m LN2 | AMD 1m WR LN2 | 2nd AOCM | Phenom II teasing
    | '07 100% E2140 | 106.5% E2160 | 100% E4500 | 103% E4400 | 5508 MHZ E6850 | 7250 MHZ P4 641 126.5% by SoF and AwardFabrik Crew all on Gigabyte DS3P c? and LN2...
    | '06 3800+ X2 Manchester 0531TPEW noHS 3201MHZ c? | 3200+ Venice noHS 3279MHZ c? | Opteron 148 0536CABYE 3405MHZ c? all on Gigabyte K8NXP-SLI compressorcooled

    | '05 3500+[NC], 3000+[W], 2x 3200+[W], 3500+[NC], 3200+[V] 0516GPDW

    Quote Originally Posted by saaya
    sof pulled a fermi on all of us !!!

  25. #25
    World Champion - IRONMODS
    Join Date
    Sep 2007
    Location
    Northern Japan
    Posts
    2,029
    XP SP3...I'll do my best
    Quote Originally Posted by Massman
    My definition of 'efficient' is 'it does not suck monkeyballs'. Yes, I set bars low.
    [CENTER]The post counter is not an intelligence meter!

    MAX11L - "It's like a console...with the suck turned down and the awesome turned up" -tet5uo
    Heat Team IRONMODS

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •