*HOT* | Corsair DOMINATOR GT | 6GB (3x2GB) | DDR3-2000 7-8-7-20 @ 1.65V | *HOT*

[chew*]

I want to say I was at 1.7 but IIRC the asus overvolts vdimm by about .04 to .06

I should warn you that was ghetto cardboard box around ram with DI.

Can't explain it but when pushing hard AMD platform really cranks the heat up on the dimms even at low voltage, adding voltage seems to tick the ram off more.

The UD5P will pull 940 6-7-6 at 1.7v on c3 with ease, no need for DI, it's not to fond of pulling in TRCD to 6 though for max clocks.

Testing showed 1808 6-6-6 was faster.

Maxxing out these sticks is tricky on AMD, pen and a pad and full manual tuning while cold is a must at least for 32m type stability.

[Gautam]

Here are some presents for proxis. Still lazily done, but not as lazily as before. And still all air and 1.76v. This is it before subzero....I promise to myself. It's not maxed because I never crashed. I just picked round numbers.

[Gautam]

And CAS 6

[ci2kla]

Guys I would like to know if new part number of the dominator GTs uses Elpida MGH-E Hyper anyone please?

[sofos1990]

Nice numbers Gautam
I bought a set of them.
Hope to clock like yours

[cstkl1]

Initial Test again ..2.1k 7-7-7-21 1n stock subtiming

[sofos1990]

I received my kit a few days ago....
Today I had some time to find out what these beauties can do
Just a quick test

with 1.53V I couldn't complete the benchmark....always getting the message "NOT EXACT IN ROUND"...I'll try some more settings though...

[sofos1990]

An update...


Need a better cpu to go higher....IMC suxxxx

[Think]

Is this overkill for the Asus P6T + i7 920?

[Esajuppeli]

Is this overkill for the Asus P6T + i7 920?

Nah. I have 1866Mhz 7-8-7-20- kit on Rampage II GENE

[Think]

Nah. I have 1866Mhz 7-8-7-20- kit on Rampage II GENE

Not for that price : $379.99US + tax

[OC Nub]

Just picked up a 2x2gb kit today, doing my first test with it. I screwed up the SS, meant to show SPD in one of the cpuz windows but oh well.

[aslanwas]

try timing like 6-7-6 , 7-8-7 9-8-9 8-9-8 with that memory, it will do a lot better

[OC Nub]

Playing around some more with the new ram. Trying some blend with your recommended 7-8-7 timings.



Also playing around with cas5 but at ddr2 speeds so no big deal there.

[aslanwas]

this test is done with 1.65V ? if yes, you didn't get the best kit

[OC Nub]

this test is done with 1.65V ? if yes, you didn't get the best kit

Actually I didn't try using any less voltage. Set it to 1.65v and left it alone.

[OC Nub]

Less vdimm.

[OC Nub]

Trying cas4.

[FireDragon]

Does anyone know what IC's these chips currently use? assuming they r still hypers but what model? also has anyone had there ram die on them yet?

Dragon

[kintaro]

my new kit for a low clock run

[sofos1990]

Nice one kintaro
What vdimm and VTT did you use for this run?

P.S: tFRC reminds me a D9GTR kit haha

[kintaro]

Nice one kintaro
What vdimm and VTT did you use for this run?

P.S: tFRC reminds me a D9GTR kit haha

vdimm 1,88 real and vtt 1.5.

[dexster]

got my kits last week... CMG6GX3M3A2000C7
while i requested the same batch corsair sent 2 different ones
09360855 and 09420113

i just hope the 2 batches play nice together as i want to get 4.0ghz stable with 12gb ram

still waiting for a couple more parts (forgot to order a cpu heat sink etc).... looking forward to some i7 ocing fun

once i have my head around things with air cooling will hopefully put it all underwater

[saxovtsmike]

I´m just using the cheaper 2000c8 Dominator GT´s and found a nice 24/7 setting for My xeon which does the final Prime Custom run at the moment.
What I really like is that I found that they run cas6 without any problem at 1.65V
http://valid.canardpc.com/show_oc.php?id=910073
Cpu is not a really good one as i´ve seen ones that do 4.3 under 1.3V but at the moment I´m happy with that.
Next will be the test how much vqpi the cpu needs to get 4ghz uncore and 1000 on the rams

[ProStock]

Yummy