Post your C3 Test Results! (new title)

[Zeus]

Flank3r, i ran at the same clocks as you did, same CPU-NB and low memory clocks.

Still pulled ahead of you with an old gen videocard at complete stock clocks:



I would have expected the 5770 to pull miles ahead.

[Asmola]

Asmola, did u tried max validation (low NB, for better CPU clocks) ?

No i havent tested max valid, i think it's worthless!
Going to install xp now, posting results later.

[FlanK3r]

its look, performance is similary. I think HD5770 is better in the last games, in others is a bit whorse. comparsion results 11/2009

[moorhen2]

Had the 965 c3 for a couple of days now,after using the c2 for the last few months,this chip is damn good,here are a few pics of what i have managed so far:

[theoldtimer]

Hello moorhen2, good to see you posting over here. This place is a joy because these guys are fearless.

[moorhen2]

Hello moorhen2, good to see you posting over here. This place is a joy because these guys are fearless.

Thanks mate,this forum is great,been browsing for a few weeks,decided to join in,very informative people on here.

[Titan7171]

I never posted these here

[Asmola]

Nice results Titan7171! Cooling? I just got new chip for testing, lets see
how it does.

[mongoled]

Ok posting as a reference for others still using DDR2 motherboards

Components
Motherboard: DFI 790FXB-M2RSH
CPU: X4 965 C3 0944APMW

Cooling
CPU Block: D-Tek Fuzion V2
Radiator: Thermochill TA120.3
Fans: 1 x Delta 120mm EHE 4000rpm | 3 x Papst 120mm 1600rpm
Pump: Swiftech MCP655 D5 @ 12v

Ambient Temps: 23C
Load Temps with Fans & 12v: 44C
Load Temps with Fans & 5v: 52C

For Prime 95 1hr+ stability @ 4000mhz - 1.52v required (CPU-Z).

Only raised the multi to 20.

Will now start raising NB clocks......

[Titan7171]

Nice results Titan7171! Cooling? I just got new chip for testing, lets see
how it does.

Thank you!

chilled watercooled 9c-12c

[Cele303]

This is my final superpi 1m on air, 4389mhz and 15.469s... Now I'm moving to water cooling...

[FlanK3r]

nice scores guys! Cele,how much voltages at CPU-NB for 3000 ?

[Cele303]

bios voltage settings cpu 1.550V, nb 1.30V, cpu-nb 1.400V, ram 1.75V, all other settings at "Normal"

nb freq 3003 is overkill, I receive worse results bumping nb, the best efficiency with nb freq is around 2960-2980, I raise it up to 3060 and the results are in various tested combinations worse than 2900+ but I had no choice, with lower nb multi I would have 2772, cpu could go 4408 but worse result... (sorry for my grammar, it sucks, I know)

This is better superpi 32m than previous one with real time priority and background xp optimization

[Zeus]

Cele303, that ram is insane! Nice clocks too.

[Tomasis]

zeus, no memory in the post office today yet?

910 mhz yeah.. 30mhz left to the limit

[Zeus]

Nope.

I was supposed to pick them up today but i did not get a confirming email they were in.

I hope tomorrow.

[Cele303]

Cele303, that ram is insane!

Yeah man, I love it, I love it, I love it!!

Did you order them also?



Tomasis, limit is 1880? My memory can't hit 1880 6-6-6-18 1T 1.75V, 1872 is the best it can go

[sponge bob]

6408mhz on gigabyte 790fxt-ud5p
nb 4539mhz (H)
time 10.610 - not my best, but this have sick perfomance

[Zeus]

Cele303, nope mate i ordered the CMG4GX3M2B1600C7 2x2GB kit. I hope to get 'm tomorrow.

You have such a great rig there, great CPU-NB speed, great ram and good CPU clocks!

[FlanK3r]

cele: for AIRcooling its impressive !! Whats your temps in room? And what is your max stabile OC (4100MHz?) PS:your 32M screen is corupt I dont seen it, only very small part)

now my AIR results (19 C in room):
superpi 1M (think, about max, il try 4310MHz and will see)


superpi 32M-max with 1.488V -DR2 is not good in 32M, in 1M is too diference, but only about 0.05-0.1s


wprime 1024M-best with 1.5V


next days others

[neo mike]

Well i switched from F7 to F3k and i definitly notice a difference in being able to overclock, i got only BSOD after 4.0 with F7 with F3 went over 4.0 pretty easy, have to try for more, my super pi time seems slow for that speed

[Tomasis]

Tomasis, limit is 1880? My memory can't hit 1880 6-6-6-18 1T 1.75V, 1872 is the best it can go

I remember Chew said about 1880..

maybe we need ddr3 1600 cas 4-4-4-12

[ReverendMaynard]

anyone here run a 965 C3 on an SS yet? Just ordered the new UD4 and C3 965 so I'd like to see what I can accomplish at -30 to -40C range.

[crazydiamond]

anyone here run a 965 C3 on an SS yet? Just ordered the new UD4 and C3 965 so I'd like to see what I can accomplish at -30 to -40C range.

razersEdge posted this in the amd/ati 3dmark thread:

965 C3 @ 4.6GHz Core 1.525v, NB @ 3.0GHz @ 1.35v

and

in this thread showed a screen of pi1m @ 4.8ghz w/ 1.55v i believe, nb @ 3ghz w/ 1.35v

he said its between 0 and -15c

[ReverendMaynard]

razersEdge posted this in the amd/ati 3dmark thread:

965 C3 @ 4.6GHz Core 1.525v, NB @ 3.0GHz @ 1.35v

and

in this thread showed a screen of pi1m @ 4.8ghz w/ 1.55v i believe, nb @ 3ghz w/ 1.35v

he said its between 0 and -15c

much appreciated mate.