XS HWBot Team

[thijs]

darn, anyone has any idea? think i've turned of a service both setfsb / eleet need, because eleet doesnt want to start ( gives an error ) and when i adjust even 1 mhz with setfsb it crashes. darn :/

//edit

fixed with the first service, dcom server process launcher was off :P , XP 32bit SP3

//edit2

omfg, turbo doesnt work, again. going to warm it up and reseat the cpu and such, hope it helps :S

[Don_Dan]

Points are back, and you were right Linuxfan!

We're back at 8000 points!

[TheGoat Eater]

looking good people!!! I hope to get some damage done soon again

[jcool]

I haven't started yet on 1337 (potential global-points) hardware like you guys are doing, but I think that with my recent upgrades, I have one of the fastest P3 setups around It's time for getting a lot of PCMARK05 records

P3 OC Board:
- 3850 AGP (fastest AGP ever made!)
- 80GB Postville SSD via SATA150 convertor
- 512MB PC-166 SDRAM < 0 graden @ 110W TEC / Watercooling
- TUSL2-C with Vcore/Vdimm mod
- CPU < 0 graden @ MACH I Single Stage

TUSL2-C? Oh please.. I got an Abit ST6 that could do >200 FSB.. IF you could handle the PCI/AGP clocks
Ah, good times... You using the 1,4 P3-S or the Celerons? Too bad the P3-S had such low multipliers...

[TRG]

TUSL2-C? Oh please.. I got an Abit ST6 that could do >200 FSB.. IF you could handle the PCI/AGP clocks
Ah, good times... You using the 1,4 P3-S or the Celerons? Too bad the P3-S had such low multipliers...

If your Abit ST6 is really that superior over a TUSL2-C, than why is it so underpopulated at HWBOT? To me it sounds like that you are preferring the Abit because you have bought the Abit and not the ASUS. They also posses the same chipset, so I think they are very much alike.

I just bougth some TUSL2-C boards because most records are made with this model, and +200 FSB doesn't seems to be a problem in most cases. My third TUSL2-C on the picture also doesn't seem to mind 210 FSB (just as the previous two before they died). It's not tested on a 1:1 divider, but I still haven't got memory that is able to reach those speeds. I'm dying to get more detailed information about s370 overclocking, so please tell me!

I'm using every proc that I can get my hands on, and in most cases the TUSL2-C is giving me worldrecords. So you better come up with some reasonable arguments (or memory ) before I start searching Ebay for Abit ST6 boards..

[Linuxfan]

Testing a P4 524 chip on my EP45-UD3P and the motherboard SEVERELY limits me as expected... :cry:
I got it up to 4.8ghz for the Wprime 32M and 4.7 for pifast and superpi. The ram runs really slow and it will not boot when I set it to a different divider...
The highest CPU vcore available is 1.40v so its running pretty well considering...
The others on HWBot have different motherboards and are running 1.8v.... I need to get some other motherboard for this chip and my e8600 to get the most out of them!
Suggestions? Might I need two motherboards, like the Rampage Extreme X48 for the e8600 and the Asus Commando P965 for the P4 chip?
Still going to try hard and get some decent submissions with the P4 and will post them later today.....
Have 6th place P4 at 4.8ghz in Wprime 32M with 1.4v
Also got an 8400GS to test with the e8600 later, hopefully I can get some good marks with that.........

Can't wait to test the Core i7 setup and the 5970 coming in!

[Hondacity]

800000000000000000 Points!!!

[chew*]

Looks like we need a decent push to overtake Jmax hardware.

I might have to resort to drastic measures after the holidays.

One of these days I will get a good nights sleep but that will have to wait.

[jcool]

If your Abit ST6 is really that superior over a TUSL2-C, than why is it so underpopulated at HWBOT? To me it sounds like that you are preferring the Abit because you have bought the Abit and not the ASUS. They also posses the same chipset, so I think they are very much alike.

I just bougth some TUSL2-C boards because most records are made with this model, and +200 FSB doesn't seems to be a problem in most cases. My third TUSL2-C on the picture also doesn't seem to mind 210 FSB (just as the previous two before they died). It's not tested on a 1:1 divider, but I still haven't got memory that is able to reach those speeds. I'm dying to get more detailed information about s370 overclocking, so please tell me!

I'm using every proc that I can get my hands on, and in most cases the TUSL2-C is giving me worldrecords. So you better come up with some reasonable arguments (or memory ) before I start searching Ebay for Abit ST6 boards..

Dude.. that was a JOKE!
I used that board for a friends build.. like 9 years ago
I only brought it up because I'll get it back soon

Back then, I was a very active member of tualatin.de - a small german forum dedicated to S370 CPUs and overclocking. Nowhere on the web is there a more comprehensive and detailed database on all there is to know about mods etc regarding S370. I left a while ago, and can't really remember too many details - I do remember we were all using ram made by a company named MCI. It was rated PC150 CL2 and could do over 200 on suicide runs.

Hey, tell you what - when I get that ST6 board back, and can't use the combo for anything (it has a 1,13Ghz P3-S on it IIRC), you can have it

[TRG]

Dude.. that was a JOKE!

Hehehe, I had a hard time believing you but eventually I did

You can make it up by providing some of that CL2 PC150 memory (I don't care about the ST6 anymore ). Damn-it, I read some really good things about that memory from MCI, but it's nowhere to be found these days..

[jcool]

Sorry, don't have any.. all I got left is some Infineons that top out at 155 CL2
This stuff was freaking expensive, and not every ram could do >200. BUT these were definitely the best SDrams ever made

[Jor3lBR]

Guys,

Can we PM each other on this one. It's new to me.

Look at his Web Page Rendering scores! Crazy:
http://www.xtremesystems.org/forums/...d.php?t=240156

I guess he changes the default browser for another one (opera?chrome?firefox?)

More info?

[Linuxfan]

Guys,
Can we PM each other on this one. It's new to me.
Look at his Web Page Rendering scores! Crazy:
http://www.xtremesystems.org/forums/...d.php?t=240156
I guess he changes the default browser for another one (opera?chrome?firefox?)
More info?

Saw that this morning... we definitely could all use that tweak...
I'll look into it when I can and play with different browsers.
I should be able to push another 100 boints soon then we will not have far to go to get #11!

[Linuxfan]

Come on, somebody post a score for the country cup stage 4 in the last few minutes! I couldn't get my AMD setup running and the 5970 isn't here yet! :cry:

[thijs]

LN2 partehh is pretty much over, nothing but troubles really. couldnt do pi_fast either, my gpu drivers were bugging, didnt had some microsoft crap 2.0 tool installed, so it wouldnt run, so same crappy score for pi_fast. i did manage tot get a 'okish' 32M run out, atleast with triple channel, bit higher uncore ( which also prevented me from running 5.4ghz, so that was a limit )
and 'mild' tweaking on the ram, was to affraid i'd mess it up, with only a few more liters left :P

anyway, here is what i came up with:

[Hondacity]

that is impressive thijs!!!

[chew*]

my gpu drivers were bugging, didnt had some microsoft crap 2.0 tool]

Sounds like you didn't have netframework 2.0 installed which is a requirement with ATI.

It happens to everyone, the best you can do is shrug it off, prepare better for next time and put it behind you.

[thijs]

that's the one indeed, cant recall having that issue last week though, with SP2 ( was using SP3 now )
O well, it's a lesson indeed!

[Linuxfan]

Got a 5970 and a 5870 that I can test together with my 5.5ghz E8600... I'll try to get it done today... Going to clean up and reloaded an OS first...

[Don_Dan]

LN2 partehh is pretty much over, nothing but troubles really. couldnt do pi_fast either, my gpu drivers were bugging, didnt had some microsoft crap 2.0 tool installed, so it wouldnt run, so same crappy score for pi_fast. i did manage tot get a 'okish' 32M run out, atleast with triple channel, bit higher uncore ( which also prevented me from running 5.4ghz, so that was a limit )
and 'mild' tweaking on the ram, was to affraid i'd mess it up, with only a few more liters left :P

anyway, here is what i came up with:

That's a nice 32M run!

Are you running with maxmem=600?

Got a 5970 and a 5870 that I can test together with my 5.5ghz E8600... I'll try to get it done today... Going to clean up and reloaded an OS first...

Great, do some damage!

Are you testing on UD3R again?

[Linuxfan]

Great, do some damage!
Are you testing on UD3R again?

I will for sure. Just got it set up, once I turn er on I'll load W7 32bit...
Its a cool looking setup today because I have it on a homemade bench all nice and neat...
I'll get some pictures and post them later.
Yeah I'll be running on the UD3P again(sold my UD3R a few weeks ago....) so I can try out 5970 and 5870 Xfire right? If so I'll hope to get 160+ in 03 with tri-fire...

[chew*]

I will for sure. Just got it set up, once I turn er on I'll load W7 32bit...
Its a cool looking setup today because I have it on a homemade bench all nice and neat...
I'll get some pictures and post them later.
Yeah I'll be running on the UD3P again(sold my UD3R a few weeks ago....) so I can try out 5970 and 5870 Xfire right? If so I'll hope to get 160+ in 03 with tri-fire...

Drivers might not be the greatest in hybrid but multi card results are better than No multicard results. Just try to match the clocks on all cards as they will get downclocked to the lower denominator anyway.

[Don_Dan]

I will for sure. Just got it set up, once I turn er on I'll load W7 32bit...
Its a cool looking setup today because I have it on a homemade bench all nice and neat...
I'll get some pictures and post them later.
Yeah I'll be running on the UD3P again(sold my UD3R a few weeks ago....) so I can try out 5970 and 5870 Xfire right? If so I'll hope to get 160+ in 03 with tri-fire...

I'm eagerly waiting for some pics!
5970+5870 should work in Xfire, yepp.
What PL are you running when pushing your E8600? And how did you overcome the 500MHz FSB limit you encountered last time? MCH ref voltage or something else?

[thijs]

That's a nice 32M run!

Are you running with maxmem=600?



Great, do some damage!

Are you testing on UD3R again?

yeah, and lsc 1. think my eff is still a bit poor :P, but he!
Perhaps i found someone who wants to sell me a 25L dewar cheap, in good state. so that would leave with with 40L. that's good , more time to bench :P i do need to test before next 2D how hard i can tweak my memory, think i can get a few seconds with that extra

[Don_Dan]

yeah, and lsc 1. think my eff is still a bit poor :P, but he!
Perhaps i found someone who wants to sell me a 25L dewar cheap, in good state. so that would leave with with 40L. that's good , more time to bench :P i do need to test before next 2D how hard i can tweak my memory, think i can get a few seconds with that extra

Okay, lsc enabled too, nice. Are you doing normal waza or CDT?

Did you try different sizes for your waza files already?

Yeah, memory tweaking might gain you some time too, maybe you can even hit 1050MHz at the same timings. What VDIMM are you running?