Kingston HyperX DIMM XMP Kit 6GB PC3-16000U CL9-9-9 (DDR3-2000) (KHX2000C9D3T1K3/6GX)

[Marvin82]

Kingston HyperX DIMM XMP Kit 6GB PC3-16000U CL9-9-9 (DDR3-2000) (KHX2000C9D3T1K3/6GX) Tall HS



Manufacturer Link:
http://www.ec.kingston.com/ecom/conf...X&promo=hx2shp
http://www.kingston.com/hyperx/products/khx_ddr3.asp


DataSheet:


Specifications: :

3 x 256M x 64-bit 2GB (2048MB)
DDR3-2000MHz 9-9-9 at 1.65V Intel® XMP
DDR3-1333MHz 9-9-9 at 1.5V. JEDEC Standard





Pics:








Overclocking results:
Testsys:
Intel Xeon W3520 4 x 2,66GHz ( HT ON )
Asus Rampage II Extreme X58 Bios 1406
GTX285
TT 850Watt NT



Super Pi Ergebnisse :

32M

2000Mhz CL7-9-7-19 1T 1,647VDimm


2128Mhz CL8-9-8-21 1T 1,647VDimm


2188Mhz CL9-9-9-27 1T 1,667VDimm




1M

1806Mhz CL6-8-7-18 1T 1,678VDimm








Everest Memory Benchmark:

1600Mhz CL6-7-6-18 1T


2000Mhz CL7-9-7-19 1T


2128Mhz CL7-9-7-19 1T


2200Mhz CL9-9-9-27 1T





LinX 0.6.2 Stability Test:

2128Mhz CL9-9-9-24 1T 1,647VDimm 1,482VTT


2000Mhz CL7-9-7-19 1T 1,647VDimm 1,356VTT




1900Mhz CL 6-8-6-18 60 1T 1,64VDimm 1,349VTT

Max with my Rampage II Extreme , the Kingston can more

[over@locker886]

Nice memory, thanks your share!

I will get same kit at next monday! I hope they will perform same as yours.

[aslanwas]

Nice clocks with that memory, keep pushing

what chipS ? Elpida bbse ?

[eva2000]

Nice clocks... looks like some form of Elpida BBSE to me

[Marvin82]

Update

2188Mhz CL9-9-9-27 1T 1,667VDimm



More does not create my CPU or board of Uncore

[Marvin82]

Nice memory, thanks your share!

I will get same kit at next monday! I hope they will perform same as yours.

THX
Good luck with the kit

[Marvin82]

Nice clocks with that memory, keep pushing

what chipS ? Elpida bbse ?

How eva2000 think it says are BBSEs


I can not remove the HS without damaging the Ram
But the timing can be seen that it really can only be BBSEs

Nice clocks... looks like some form of Elpida BBSE to me

THX

Yes 99.9% I think that too, say the timing

It is the first kit what BBSE tRFC 72 makes at 2000Mhz

2000Mhz CL7-9-7-19 72 1T 1,647VDimm 1,363VTT

[rusty]

Marvin82 can you do 7-7-7-18-1t ? @ 1800-2000mhz?

[KILLER_K]

Looks good. The heatsinks are the easiest i ever seen to remove, take your fingernail and wedge between the ende corner fin and twist and they will fall apart. Seen it happen so many times it is sad. They should do some king of set screw for it in my opinion.

[TONY GAL]

Marvin82 can you do 7-7-7-18-1t ? @ 1800-2000mhz?

because i have the same rams
2000 7-9-7-20
1800 7-7-7-18 may be better
1950 7-8-7-20

[Marvin82]

Marvin82 can you do 7-7-7-18-1t ? @ 1800-2000mhz?

No, that can only Hyper Chips
The chips come down with the BBSE tRCD not so far
That's the only problem but I can CL6-8-6-18 at 1800Mhz

Short test
Have currently no time
1800Mhz CL6-8-6-18 1T 1,66VDimm 1,363VTT

PI 32M

Looks good. The heatsinks are the easiest i ever seen to remove, take your fingernail and wedge between the ende corner fin and twist and they will fall apart. Seen it happen so many times it is sad. They should do some king of set screw for it in my opinion.

I Try everything possible not to me

because i have the same rams
2000 7-9-7-20
1800 7-7-7-18 may be better
1950 7-8-7-20

1800MHz 7-7-7-18 ? which VDimm?
Then you caught either a very good kit or not BBSE chips on it

[TONY GAL]

i remove the HS and the chips is elpida bbse!

[over@locker886]

i remove the HS and the chips is elpida bbse!

Thanks, the info!

Was easy to remove HS? Because I would like use RAM-Pot..

[Marvin82]

i remove the HS and the chips is elpida bbse!

The timings have said that there are BBSE

Can you post a picture
THX

[Hondacity]

this is nice...thanks for sharing

[over@locker886]

2207Mz 8-9-8-22 1T 1,66v in DFI DK P55-T3eH9 mobo

[VVJ]

Marvin82, is there any chance to show detailed info on XMP profiles? Thanks!

[Marvin82]

Here you can see the 2 XMP profiles




I hope this is OK or should I post something else

[Marvin82]

2207Mz 8-9-8-22 1T 1,66v in DFI DK P55-T3eH9 mobo

I see you bought the Ram
Very nice result but there is still more or

BBSE Chips

[Jakethesnake011]

Ordered myself a kit of this RAM with the new fan. Now can anyone let me knwo how the RAM and fan fits with a TRUE with a push pull sonfig with 120 by 38mm fans, it looks like it will be very tight, and I think I may have to get rid of the fan b/c of spacing. Although I am pumped to see how I fast I can get these sticks to run, I am shooting for 2000 Mhz at 8-9-8-8-21 1t timings, if not higher depends on how stable i can get my i7 920 overclock on the classified.

[Marvin82]

New Vali

2224Mhz Uncore 4448Mhz

[Jakethesnake011]

I got this kit a few days ago, and I am having some trouble getting anything close to 2000 mhz stable, I can run 1600mhz at 7-8-7-18 1T and have no problem, but when I want to run them at the high speed, and an UNcore of 4000mhz or higher I am un successful. Now I am using an Vtt of 1.45V and vcore of 1.365 for a 4.2Ghz overclock, any ideas?

[Marvin82]

Wat trouble you have wats the Problem?

[over@locker886]

2 x dimm in Asus P7P55WS Supercomputer (Intel P55 platform) @ 2210Mhz 7-9-7-22 1T 1,65v

[mikecdm]

I have the 4gb kit of this stuff and can't get anywhere close to these timings. I can't even boot at 1700mhz with 8-8-8-24 with 1.65v. It's on my EVGA P55 FTW, any suggestions or am I just unlucky enough to get bad chips. Maybe the 6gb kit is better than the 4gb kit?