Can anyone rate the primochill Typhoon III?

[SoulsCollective]

Because Spain is on a continent Far Far away...

That may be true, but ordering from the PC website to Australia I also noticed that shipping was far, far more expensive than it usually is for ordering from the USA. I normally pay somewhere between USD $30 and $40, but the cheapest option available was USD $60 - for less than two weeks shipping time I would have been charged USD $100.

[millertime359]

PICTURES!

Since Geno asked.



The faceplate really does set the T3 off. It looks really good and for those of you wondering, it is a 1 sec install. The six pieces of foam tape were already applied, just peel and stick.

You will have to slide it back into the bay a little. I will probably redrill the holes when I get ready to do the next upgrade. Great addition G, keep up the good work.

[BoxGods]

Anyone know where to get these with quick and cheap shipping to Australia? I need one but Jab-Tech (Whom have everything else I need) won't be getting them for about 2-3 weeks!

There is an order shipping out to Australia tomorrow (Monday the 14th).

That may be true, but ordering from the PC website to Australia I also noticed that shipping was far, far more expensive than it usually is for ordering from the USA. I normally pay somewhere between USD $30 and $40, but the cheapest option available was USD $60 - for less than two weeks shipping time I would have been charged USD $100.

No idea on shipping costs. I was making a sort of joke because my nephew Markus is a Missionary on assignment in Spain and his emails are sent "From a land Far Far away"...think of it as a shout out.

Since Geno asked.



The faceplate really does set the T3 off. It looks really good and for those of you wondering, it is a 1 sec install. The six pieces of foam tape were already applied, just peel and stick.

You will have to slide it back into the bay a little. I will probably redrill the holes when I get ready to do the next upgrade. Great addition G, keep up the good work.

+1 points towards pimpness

[millertime359]

+1 points towards pimpness

If I get some time this coming weekend, plan to head over to Micro Center and get these and point them right at the res. The rest of the case will be lit with white LEDs. I hope that it will set it off that much more.

[karbonkid]

If I get some time this coming weekend, plan to head over to Micro Center and get these and point them right at the res. The rest of the case will be lit with white LEDs. I hope that it will set it off that much more.

The T3 picks up light really nicely - I'm not really into bling but light leaking from my fan controller gives it a nice subtle blue glow.. I'll try and show some pics when I get a chance...

[millertime359]

The T3 picks up light really nicely - I'm not really into bling but light leaking from my fan controller gives it a nice subtle blue glow.. I'll try and show some pics when I get a chance...

I'm going to wire them up to a switch so I can turn all the lights off when I want. I don't like the bling lights on all the time, but are great to show off the build when friends come over.

That would be great to see the photos.

[century child]

I am not sure where they will be selling...I know SOME of it is going to Germany. Beyond that you need to pop over to Murdermods.com and see whats up.

OK, I will try to remember to have them add some black tubing for you when the new reseller gets their first shipment.

Thanks much. U da man!

[karbonkid]

I'm going to wire them up to a switch so I can turn all the lights off when I want. I don't like the bling lights on all the time, but are great to show off the build when friends come over.

That would be great to see the photos.

here ya go..






Here you can see where the light comes from:




Looks like i've still got some bleeding to do...

[millertime359]

O yea, that does look pretty sweet. I think those LEDs lights should do the trick then.

Just got to get down to Micro Center this weekend.

You need to get that black faceplate on there Karbonkid. That would look insane then.

[Utnorris]

So Boxgods, you have a new block coming? And a new res? PICS please and some details. I would be interested in a new CPU block.

[viper2004]

Here's mine:





Not installed yet because I'm still working on my case. The double sided tape comes pre-applied btw.

[millertime359]

I was meaning to take that back shot myself, but got a little overally excited to put it on that I forgot.

[BoxGods]

If I get some time this coming weekend, plan to head over to Micro Center and get these and point them right at the res. The rest of the case will be lit with white LEDs. I hope that it will set it off that much more.

UTnorris is right about 5mm LED's fitting perfectly into the side slots BTW. No need to spend the dough on those fancy pointy ones when plain pigtailed LED's fit there perfectly...

So Boxgods, you have a new block coming? And a new res? PICS please and some details. I would be interested in a new CPU block.

Yes. Its a dual inlet dual outlet design with micro Channels and a few other "old school" block tricks I pulled out of my hat. I actually had you partially in mind when I designed some of the aesthetics (followed your plating log). The new rez is aimed mostly at the SFF guys as we hardly ever get any love products wise...though it will have one feature the high performance guys will like maybe.

As for pictures...not till parts are heading out to the resellers this time--after what happened with the T3 launching late and the early bugs etc. Reservoir is done, but I have about a week till the sample for the block arrives...figure about 2-3 weeks for images. The matching D5 and DDC pump will be done about the same time so it all works out.

Here's mine:

How cool is THAT! Man you guys take awesome pictures...I need to take a class or something.

here ya go..

More great pictures. See how well the rez picks up the light Millertime? Just use the side slots man

[millertime359]

UTnorris is right about 5mm LED's fitting perfectly into the side slots BTW. No need to spend the dough on those fancy pointy ones when plain pigtailed LED's fit there perfectly...

More great pictures. See how well the rez picks up the light Millertime? Just use the side slots man

Thanks Geno. I fitted them up real quick and guess I only need to get the white LEDs for the case. I'll wait till I get those lights as I plan to wire them all up to one switch.

How cool is THAT! Man you guys take awesome pictures...I need to take a class or something.

You and me both bud. I just do my best to not completely embarrass myself.

[wsch005]

Testing will tell you the truth!I believe!!!

[strike]

any advice?
Loop order?

striker II formula
8800 GTX SLI

swiftech MCR220
Thermochill 120.3
GTZ
EK Fullcover 8800 GTX
EK-NB S-MAX ACETAL
EK-SB STRIKER 2 FORMULA ACETAL
Feser tube 1/2ID 3/8 OD Blue
Distilled water with Silver coils
MCP 655
Typhoon III

all will be inside on antec 1200

[millertime359]

any advice?
Loop order?

striker II formula
8800 GTX SLI

swiftech MCR220
Thermochill 120.3
GTZ
EK Fullcover 8800 GTX
EK-NB S-MAX ACETAL
EK-SB STRIKER 2 FORMULA ACETAL
Feser tube 1/2ID 3/8 OD Blue
Distilled water with Silver coils
MCP 655
Typhoon III

all will be inside on antec 1200

MB and CPU on 120.3 and 8800s on 220

[strike]

MB and CPU on 120.3 and 8800s on 220

ok

so the order is
1 loop T3-rad 120.3-CPU -chipsets-T3
2 loop T3- rad 120.2 - 8800s - T3

and how about if i put the EK 8800s in parallel ?

[Vapor]

I'd put the 120.3 and the CPU on subloop 1 and everything else on subloop 2.

You can put the 8800s in parallel if you want, the performance difference is negligible at best.

[levinan]

hello to watercooler mate, . Usually i'm just lurking at here & OCN finding information for watercooling. Will start a build soon anyway. Today i'm just found a mod from T3 primochill reservoir at ppc.com, does anyone already know ??? the link is

here

the t3 reservoir 8 port version :d. why it has so soon after i'm already had two of the current version .

sorry for my bad english.....

[Diverge]

hello to watercooler mate, . Usually i'm just lurking at here & OCN finding information for watercooling. Will start a build soon anyway. Today i'm just found a mod from T3 primochill reservoir at ppc.com, does anyone already know ??? the link is

the t3 reservoir 8 port version :d. why it has so soon after i'm already had two of the current version .

sorry for my bad english.....

You can't mount a pumps to those. It's just a res.

[levinan]

You can't mount a pumps to those. It's just a res.

thanks for the fast reply, actually looking at the pic finding the pump mount position atm :d. So it just reservoir then.

[BoxGods]

You can't mount a pumps to those. It's just a res.

Hey! Reservoirs need luvs too

[GregSG]

Just curious, what's features bout the 8 ports T3?

[millertime359]

Just curious, what's features bout the 8 ports T3?

I think it is meant to be able to hook a couple of loops up to it and have a couple of ports to mount LEDs into for the bling.

It is just a res, so you can can feed anything you want off of it.