Page 2 of 4 FirstFirst 1234 LastLast
Results 26 to 50 of 87

Thread: Trying to take down the big boys (Andre) in 3DMark 2006. Quad GFXS!

  1. #26
    Awesome!

  2. #27
    Banned
    Join Date
    Jan 2009
    Posts
    197
    Big numbers!!

  3. #28
    Xtreme Member
    Join Date
    Aug 2004
    Location
    Germany
    Posts
    280
    Yesterday we had a first test with Classified E760 and our Xeon W3540 together with ln2. We could reach this:


    (click for larger version)

    compare-url

    Unfortunately efficiency isn't really good. But we have to deal with a horrible coldboot-bug at -27 degrees. Once the system is up and running we can reset and reboot normally. But once we change uclk, memory-timings and/or qpi-settings, the system shuts down completely and we only can boot again when the temperature is at -27 or less.

    So we just set "safe" uclk and memory-timings and started to look for max frequency of our xeon. It passed cpu-test at 5,460 mhz but at full run it only reached frame 39 of cpu-test #2. So maybe with finetuning we can pass the whole benchmark at this frequency.

  4. #29
    Xtreme Legend
    Join Date
    Jun 2005
    Location
    Taipei, Taiwan
    Posts
    2,310
    Quote Originally Posted by MusicIsMyLife View Post
    Yesterday we had a first test with Classified E760 and our Xeon W3540 together with ln2. We could reach this:


    (click for larger version)

    compare-url

    Unfortunately efficiency isn't really good. But we have to deal with a horrible coldboot-bug at -27 degrees. Once the system is up and running we can reset and reboot normally. But once we change uclk, memory-timings and/or qpi-settings, the system shuts down completely and we only can boot again when the temperature is at -27 or less.

    So we just set "safe" uclk and memory-timings and started to look for max frequency of our xeon. It passed cpu-test at 5,460 mhz but at full run it only reached frame 39 of cpu-test #2. So maybe with finetuning we can pass the whole benchmark at this frequency.


    20 points~
    Quote Originally Posted by Shammy View Post
    No Saying, but Showing


  5. #30
    Xtreme Member
    Join Date
    Aug 2004
    Location
    Germany
    Posts
    280
    Yeah, we noticed that you are only 21 points ahead. But I think you are safe for the next few weeks. We have a few litres ln2 left (maybe 15 litres) but the next two to three weeks we don't have time to bench.

    If we can tweak the whole system right I think we can come close to 38k with it.

  6. #31
    k|ngp|n/Sham my brothers
    Join Date
    Aug 2002
    Location
    Athens---Hellas
    Posts
    5,693
    ALL of you, are lossing the Crossfire at GT3....
    Run it alone or pick it with the GT4 to run them together and you will see what I mean...
    INTEL PWA FOR EVER

    Dr. Who my arss...

    .........



  7. #32
    Xtreme Addict
    Join Date
    Nov 2003
    Location
    Oslo, Norway
    Posts
    1,218
    Quote Originally Posted by MusicIsMyLife View Post
    Yeah, we noticed that you are only 21 points ahead. But I think you are safe for the next few weeks. We have a few litres ln2 left (maybe 15 litres) but the next two to three weeks we don't have time to bench.

    If we can tweak the whole system right I think we can come close to 38k with it.
    that cpu score is high!! any tweaks? got a 760 myself now, but no time to test.. very nice scores Jens!

  8. #33
    Xtreme Addict
    Join Date
    Nov 2003
    Location
    Oslo, Norway
    Posts
    1,218
    I just tested the E760 fast on LN2 with four 4890s.. I think I got the EXACT same score as hipro in 06, at a tad lower clock.. 5.3Ghz cpu.. screen is ofcourse on the bench harddrive, will ship it over as fast as possible.

    I bumped the uncore up to about 4200Mhz on this run, but the coldbug appeared earlier than before, I was at -115C when it started bugging. I ran about -140C before, anyways.. I will test this board some more, seems to my that 100Mhz = 1000 points in 06.. 38k should be very possible at 5.4Ghz.

    Last edited by dpa; 07-20-2009 at 03:36 PM.

  9. #34
    Registered User
    Join Date
    May 2009
    Location
    Norway, Stavanger
    Posts
    23
    Was waithing for some updates from you. Glad to see you back on your rig after EM.
    Hope you make 38k soon!

  10. #35
    k|ngp|n/Sham my brothers
    Join Date
    Aug 2002
    Location
    Athens---Hellas
    Posts
    5,693

    dpa M8.......Uncore is one secret to get high scores...
    I've spent ~ 440lt+ of LN2 ONLY for 2k6....
    INTEL PWA FOR EVER

    Dr. Who my arss...

    .........



  11. #36
    Xtreme Enthusiast
    Join Date
    Mar 2005
    Posts
    544
    George you are one crazy guy !
    The world is soon to be on LN2 crisis if you keep on going that way, that is truly insane man !!

    PC: Intel Core i7 920 D0 | Kingston Hyperx T1 6GB 2000Mhz 8-8-8 RAM | Foxconn Bloodrage GTI | Sapphire 4870X2 | Perc 5/i - WD 640AAKSx4 RAID0 | Asus 2014L1T | Dell 2407WFP | Lian Li G70 Silver Watercooled
    WaterCooling: Q² Project by The-Fox
    CPU Loop: Swiftech Apogee GTZ | Feser X-Changer 480 | Swiftech MCP655 Vario w/ DetroitAC top | EK Multioption RES 250 Rev.2 | Tygon R3603 1/2" | YL D12SL@1350RPM x4
    GPU Loop: EK-FC4870 X2 Nickel | Swiftech MCR320 | Swiftech MCP655 Vario w/DetroitAC top | EK Multioption RES 150 Rev.2 | Tygon R3603 1/2" | YL D12SL@1350RPM x3



  12. #37
    Xtreme Legend
    Join Date
    Sep 2002
    Location
    Finland
    Posts
    1,707
    big boys are down



    Lets see the backups: http://www.futuremark.com/community/...fame/3dmark06/
    Favourite game: 3DMark
    Work: Muropaketti.com - Finnish hardware site
    Views and opinions about IT industry: Twitter: sampsa_kurri

  13. #38
    I am Xtreme
    Join Date
    Jan 2005
    Posts
    4,714
    Quote Originally Posted by dpa View Post
    I bumped the uncore up to about 4200Mhz on this run, but the coldbug appeared earlier than before, I was at -115C when it started bugging. I ran about -140C before, anyways.. I will test this board some more, seems to my that 100Mhz = 1000 points in 06.. 38k should be very possible at 5.4Ghz.
    That sounds like the IMC coldbugging rather than the processor core. When you hit the coldbug at -115°C, did you try increasing the uncore frequency and/or uncore voltage (VTT)?
    Where courage, motivation and ignorance meet, a persistent idiot awakens.

  14. #39
    k|ngp|n/Sham my brothers
    Join Date
    Aug 2002
    Location
    Athens---Hellas
    Posts
    5,693
    @ Sampsa: This is with the 9.6 Drivers - because I don't see anywhere in FM that are approved and I see yours are approved....
    INTEL PWA FOR EVER

    Dr. Who my arss...

    .........



  15. #40
    Xtreme Legend
    Join Date
    Sep 2002
    Location
    Finland
    Posts
    1,707
    Quote Originally Posted by hipro5 View Post
    @ Sampsa: This is with the 9.6 Drivers - because I don't see anywhere in FM that are approved and I see yours are approved....
    They are approved, but not yet updated to their site. Try yourself
    Favourite game: 3DMark
    Work: Muropaketti.com - Finnish hardware site
    Views and opinions about IT industry: Twitter: sampsa_kurri

  16. #41
    k|ngp|n/Sham my brothers
    Join Date
    Aug 2002
    Location
    Athens---Hellas
    Posts
    5,693
    Quote Originally Posted by Sampsa View Post
    They are approved, but not yet updated to their site. Try yourself
    OK - Thanks...
    INTEL PWA FOR EVER

    Dr. Who my arss...

    .........



  17. #42
    Xtreme Addict
    Join Date
    Nov 2003
    Location
    Oslo, Norway
    Posts
    1,218
    Quote Originally Posted by hipro5 View Post

    dpa M8.......Uncore is one secret to get high scores...
    I've spent ~ 440lt+ of LN2 ONLY for 2k6....
    lol, 440lt.. haha..!

    this still is not my best score.. but if I can manage to run this cpu at same settings and 5.4Ghz+ I will break 38k with a blast

    the E760 IS faster than my old E759, tried some 4.2Ghz action, and it runs 200-400 points faster.

    going for 5.38Ghz later, ran cpu tests at that yesterday

  18. #43
    Xtreme Addict
    Join Date
    Nov 2003
    Location
    Oslo, Norway
    Posts
    1,218
    Quote Originally Posted by massman View Post
    That sounds like the IMC coldbugging rather than the processor core. When you hit the coldbug at -115°C, did you try increasing the uncore frequency and/or uncore voltage (VTT)?
    I ran high VTT for this, but havent tried to bump the uncore YET.. iam having the -60 coldboot thing.

  19. #44
    I am Xtreme
    Join Date
    Jan 2005
    Posts
    4,714
    how high is high?
    Where courage, motivation and ignorance meet, a persistent idiot awakens.

  20. #45
    Xtreme Addict
    Join Date
    Nov 2003
    Location
    Oslo, Norway
    Posts
    1,218
    Quote Originally Posted by massman View Post
    how high is high?
    I believe its about 1.57v.

  21. #46
    I am Xtreme
    Join Date
    Jan 2005
    Posts
    4,714
    1.57v should be enough to warm up the IMC at least a bit; I reckon that, as you say, bumping the frequency might help. Or else you can just go bezerk on the VTT,
    Where courage, motivation and ignorance meet, a persistent idiot awakens.

  22. #47
    Xtreme Addict
    Join Date
    Nov 2003
    Location
    Oslo, Norway
    Posts
    1,218
    Quote Originally Posted by massman View Post
    1.57v should be enough to warm up the IMC at least a bit; I reckon that, as you say, bumping the frequency might help. Or else you can just go bezerk on the VTT,
    ill give 20x a run later... just bought a 24 pack of kneaded eraser

  23. #48
    I am Xtreme
    Join Date
    Jan 2005
    Posts
    4,714
    If 20x doesn't work, test 21x or 22x ... uncore multipliers on i7 are weird
    Where courage, motivation and ignorance meet, a persistent idiot awakens.

  24. #49
    Xtreme Addict
    Join Date
    Nov 2003
    Location
    Oslo, Norway
    Posts
    1,218
    Quote Originally Posted by massman View Post
    If 20x doesn't work, test 21x or 22x ... uncore multipliers on i7 are weird
    just hoping I have enough LN2 for all that

  25. #50
    Xtreme Legend
    Join Date
    Jun 2005
    Location
    Taipei, Taiwan
    Posts
    2,310
    Quote Originally Posted by Sampsa View Post
    big boys are down



    Lets see the backups: http://www.futuremark.com/community/...fame/3dmark06/


    Here you go.






    Any backups? Who knows.
    Last edited by Gautam; 07-22-2009 at 10:37 AM.
    Quote Originally Posted by Shammy View Post
    No Saying, but Showing


Page 2 of 4 FirstFirst 1234 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •