crunchers-in-a-basket . love it
I like the ghetto-ness of the whole setup ... inspiring![]()
crunchers-in-a-basket . love it
I like the ghetto-ness of the whole setup ... inspiring![]()
w00t!!
Got my main rig all configured the way I want it ( almost!), and now just have to move it back to the bedroom. Now it can go back to crunching; has a fresh install of BOINC and a fresh install of the OS.
Mainboard : Supermicro X7DWA-N
Chipset : Intel 5400B
Processor : Intel Xeon X5460 @ 3166 MHz
Processor : Intel Xeon X5460 @ 3166 MHz
Memory: 8192 MB (4 x 2048 DDR2 FB-DIMM )
Video Card : NVIDIA GeForce 9600 GT
Hard Disk : STT_FTM32GX25H (32 GB)
Hard Disk : SAMSUNG (1000 GB)
Hard Disk : ST3320620AS (320 GB)
Hard Disk : ST3500320AS (500 GB)
Hard Disk : Array SCSI Disk Device (1999 GB)
Hard Disk : Array SCSI Disk Device (749 GB)
DVD-Rom Drive : ASUS DRW-2014L1
RAID Contoller: Supermicro AOC-USAS-S8i (PCI-E 8X)
Monitor(s): 2 x Acer AL2416W
Case: LianLi A70 - Silver
Crunching to Crush Cancer
Somebody, Stop Me!![]()
Scott... one word for you: BSEL-Mod.
Seriously, 3,8Ghz/400 FSB would boost the PPD of that rig immensely (I'd project around 38k for 400*9) - if your CPUs are E0 they can do that easily (my X5450's can do 4,05Ghz on stock 1,25V).
Try with SetFSB how high you can go stable (I bet 410-420) and then do the mod (or just use SetFSB)![]()
I figured I should do a little thread resurrecting. Here was my computer, I had to put it back in the case because the cats were trying to attack it.
![]()
hotwaxisbad, well i say i've never saw something like that! Nice idea mate![]()
You use IRC and Crunch in Xs WCG team? Join #xs.wcg @ Quakenet![]()
Ze gear:[22:53:09] [@Jaco-XS] i'm gonna overclock this damn box!
Main rig: W3520 + 12GB ddr3 + Gigabyte X58A-UD3R rev2.0! + HD7970 + HD6350 DMS59 + HX520 + 2x X25-E 32gig R0 + Bunch of HDDs.
ESXI: Dell C6100 XS23-TY3 Node - 1x L5630 + 24GB ECC REG + Brocade 1020 10GbE
ZFS Server: Supermicro 826E1 + Supermicro X8DAH+-F + 1x L5630 + 24GB ECC REG + 10x 3TB HDDs + Brocade 1020 10GbE
Lappy!: Lenovo Thinkpad W500: T9600 + 8GB + FireGL v5700 + 128GB Samsung 830 + 320GB 2.5" in ze dvd slot + 1920x1200 @ 15.4"![]()
Nice thread revival!
Heres my old farm. Decommisioned now unfortunately but will be bigger and better soon!
Not quite as tidy as you hotwaxisbad. :p
I'd suggest upgrading to duct tape to go with your zip tie !
I like cutting holes in the mobo platform to stash all of the cables, etc in.
don_xvi helps find cures for cancer, AIDS and West Nile, among other research !
Donald A. Perlick helps find cures for Alzheimer's, cancer, and Parkinson's, among other research !
My Farm![]()
Last edited by VOID WARRANTY; 10-20-2009 at 11:34 AM.
i7 920 4.2ghz..6gb 1600mhz cas 7 memory..Windows 7 Ultimate Edition..Windows XP..650 watt PS..Water..3DFX Voodoo 3
my basement watercooling setup:
basically , a large barrel (125 liter) , Alphacool AP1500 pump, dual radiator .
The pump delivers the water to the 1st floor (about 6m high) .
To start , I feed the pump 24v for 20-30 seconds. Once running , 12v is enough. (~30w powerconsumption).
The waterloop works pretty good , shame I'm not using it at the moment
I need another X58 board urgently.
OMG, jaco actually posted pics
I must be dreaming![]()
Nice looking rig illidan!
I'll contribute here soon enough![]()
Loving the Jaco basement shot - now that's a reservoir! +1 on nice rig, illidan.
here...my ghetto computer repair shop i run in my home off of craigs list..(spare time few bucks here and there)....hey i got make sure the pig eats...i also have recording equipment and all kinds of crap "this room is like a Swiss army knife" will be clearing out the room in a few months to record a demo for my Death Metal Band...the blankets are on the wall as sound insulation..a few tools laying around but i have a barn to keep tools in
Last edited by VOID WARRANTY; 10-20-2009 at 11:50 PM.
i7 920 4.2ghz..6gb 1600mhz cas 7 memory..Windows 7 Ultimate Edition..Windows XP..650 watt PS..Water..3DFX Voodoo 3
WORKSTATION || TJ10B-W | i7-3930K C2 | 4x8GB DDR3-2400 CL10 | 2xGTX TITAN 6GB SLI | P1000W || 30" 2560x1600@60hz
HTPC || GD08B | i7-920 D0 | 3x4GB 2000 CL9 | HD5870 1GB | X25-M 80GB | X-750 || 75" 1920x1080@4x200hz
NOTEBOOK || P170EM | i7-3820QM | 2x8GB DDR3 1600 CL9 | GTX680M 4GB | HyperX 3K 240GB || 17,3" 1920x1080@60hz
ULTRABOOK || W130EW | i7-3620QM | 2x8GB DDR3 1600 CL9 | HD4000 | HyperX 3K 240GB || 13,3" 1366x768@60hz
You're lookin kinda empty RR...
Edit: Ah, see ya got that fixed.![]()
Last edited by Otis11; 10-21-2009 at 07:11 AM.
Some nice farms guys. Have some pics of the cabinet thing I made for my crunchers works pretty good just a wiring nightmare.
man that pic is![]()
Smoky should be our new mascotte for the team.
Bookmarks