[MemoryReaction] CellShock 2x1GB PC2-8000C4

[Faiakes]

nice one.my last kit i needed 2.28v-2.30v for 1300.with this new kit i can do ddr1300 with 2.20v

I shall be verifying that claims of yours' very soon sir!

What kind of cooling do you run?

[radaja]

i have a 40mm fan taped to the ram and another 40mm fan taped to my NB.
for my cpu im using a mini-typhoon with a 92mm-38mm 4800RPM fan blowing straight down.
and above my cpu fan i have a dryer vent hose thats hooked up to my airconditioner,and
blows 8c-10c air directly over my cpu

[Faiakes]

Flippin' heck...

OK, I have... nothing, apart from the CPU cooler (Thermaright Ultra-120 Extreme).

I'm having trouble stabilising the Cellshock at DDR-1300 with 2.4v (although I haven't exhausted all possible NB voltage combinations nor put a fan on it yet).

However, I'm getting a bit tired so for now I'll leave at 510/637.5 and finish off Bioshock, before the new one comes out.

[Smartidiot89]

*Cough* I just happen to have these sticks for sale *Cough* PM Me

[radaja]

Faiakes,i was able to get 1320 w/2.28v in bios 2.26v load
this new kit stomps all over my last two.
8x550@4400 w/1.29v ddr1320 pl8 w/2.28v

[Faiakes]

Faiakes,i was able to get 1320 w/2.28v in bios 2.26v load
this new kit stomps all over my last two.

Nice!
Just 2.28 for the RAM in BIOS?
Is that with active cooling on the RAM (and NB)?

What about the NB + GTL settings?

[radaja]

yes active cooling on both.cpu ref is set to normal and NB ref is at 0.720

[Faiakes]

yes active cooling on both.cpu ref is set to normal and NB ref is at 0.720

Alright, I'll try it but I don't think I'd keep it even if I did achieve it.

v2.14 for 600 A 24/7 set-up
v2.28 for 660 (although it is still within warranty and technically can run it without a fan)