OCZ 8500 Low-Voltage Blade

[Hoss331]

whoa, take it easy killer

[method526]

since the blade 9600s are out (well...auto-notify on the egg), someone should test them out and see how far they push compared to the g.skill 9600s. i await the results.

[YMAA]

Well I'm sure it was Tony's idea to put the tack on there. What a right POS you have become Tony. Oh nice to see your forums were doing so well everyone is just waiting for you to crap on them. Man all those years of hacking BIOS screwed your head up. Finally, you have made it corporate right before the crash thats gonna last 5 years and you will be laidoff or your small oc business will crash and I hope it does. Good riddance trash.

Cool story, bro.

[18 is # 1]

linky no worky

http://www.elpida.com/en/products/de...E1108ACBG.html

[dasickninja]

Well I'm sure it was Tony's idea to put the tack on there. What a right POS you have become Tony. Oh nice to see your forums were doing so well everyone is just waiting for you to crap on them. Man all those years of hacking BIOS screwed your head up. Finally, you have made it corporate right before the crash thats gonna last 5 years and you will be laidoff or your small oc business will crash and I hope it does. Good riddance trash.

Wow dude, you wanna walk that statement back a bit? You're being a bit thick.

[railmeat]

Well I'm sure it was Tony's idea to put the tack on there. What a right POS you have become Tony. Oh nice to see your forums were doing so well everyone is just waiting for you to crap on them. Man all those years of hacking BIOS screwed your head up. Finally, you have made it corporate right before the crash thats gonna last 5 years and you will be laidoff or your small oc business will crash and I hope it does. Good riddance trash.

coldflo-
i have been banned multiple times here for argueing with other members,starting threads in the wrong section and had infractions handed to me like tic-tacs.sometimes deserved,sometimes not but....
Tony has helped us MULITPLE times with his insane crazy scheldue threw the years.his avater used to say"here to help"with a hand out and he did.he would even get back to morons like me with ram questions that got me threw things i could not figure out so i could go on gaming etc.point is the dude is OVOIUSLY getting burnt out from this buisness,his buisness,life in general.he def neds a vacation i think and does not get the thanks from ppl thats deserved.i myself feel bad for a guy who broke his b@lls to make sure questions were answered,products got out and product issues were solved.i dunno i think u were harsh on this man.he is the type of dude to ALWAYS help u out.he has the brain of 100 ppl as far as pc diagnostics go.u can do whatever u want but i am thankful for guys like him and mabye u could smoke a funny cig and chill out bro?u might be burnt out yourself man?










@clo007
"First run. One stick is in the freezer as we speak."

sorry to hear about the ics getting there skulls ripped off there body,lol.i did warn you tho.thanks for the info tho seriously.u saying u did it for us does mean something,ppl can post what ics they think they are etc.but we now know for a fact because of u.

the freezer thing dont work.the glue has a good bond to the ics and your making that bond 100x stronger when u freeze them.the glue becomes superglue!
when there hot/warm/roomtemp/or just plucked out of your pc is best.then the glue is tacky and they come right off basically.


try pulling scotch tape off paper frozen.wont happen.

then try it at room temp.or slightly warmed,come right off..the glue is melted.


my circular saw was taken with the pic for the rofl,effect.


there sitting in my closet and work purfect still,actually there amazing sticks..only reason i took my spreaders off is because the tape acts as heat barrier(not transfer) in my eyes and my fans work better hitting direct ics.

[Tony]

Coldflo you are the biggest dork I have ever seen...don't ever come to my forum

[CobraXP]

Hey Tony great product. got to 1152 5-5-5-15-28 @ v1.86 on Asus M4N82 Deluxe 980a. Thank you all for input.

[radaja]

well said Tony
thanks for all your time and hard work.

[Movieman]

Well I'm sure it was Tony's idea to put the tack on there. What a right POS you have become Tony. Oh nice to see your forums were doing so well everyone is just waiting for you to crap on them. Man all those years of hacking BIOS screwed your head up. Finally, you have made it corporate right before the crash thats gonna last 5 years and you will be laidoff or your small oc business will crash and I hope it does. Good riddance trash.

And what a BANNED member you have become with your nasty mouth.

[zsamz_]

my sticks are in ottawa

-n7- pccyber just got the lv blades in today

[zsamz_]

kingston value ram 2x2 have the same chips but are rated 6400-8500
E1108ACBG
-8E-E its rev:C

-1EH-E is newer rev or higher bin

freinds pc shop is receiving new shipment tomorow gonna go maybe get lucky
if i find -1EH-E might be rev
takin the whole box
i guess i was wrong these are indead ddr2 chips
verry smart people at ocz findin nice cheap chips n sellin at a premium
big thanks to clo007 i just wished u didnt rip them chips

[zsamz_]

found pics

http://www.fudzilla.com/index.php?op...12197&Itemid=1

[RAID]

benchmarks coming

[Zeus]

Sweet picture, Raid! Looking forward to your results.

[Smartidiot89]

Just moved over to AM3 myself, but will definatly make sure to recommend these modules for DDR2 users on our HW forum. Awesome product Tony

[Ghostleader]

benchmarks coming

Looking good, most be the new Maximus II Gene board, can´t wait to see how high those PC-9600 Blade can do on that board.

[xzulu]

@RAID

Nice Dude! Congrats!

[Cyfer]

Blade 9600 arrived this morning.
Quick tests:

1200MHz 5-5-5-15 @1,80v.



1250MHz 5-5-5-15 @1,86v.

[SpuTnicK]

Cyfer, try to set cl4 and try 1:1 ratio. Is it possible?

[HousERaT]

Blade 9600 arrived this morning.
Quick tests:

1200MHz 5-5-5-15 @1,80v.



1250MHz 5-5-5-15 @1,86v.

That looks real good so far. How high can you take them at say 4.5Ghz on the cpu?

[Ghostleader]

@ Cyfer

Nice pic, you tRD looks kind high though, shouldn´t you be able to get it down by one notch.

BTW what´s your bandwidth @ 500 ram @1200 CAS5?

[Cyfer]

Sorry guys, today I had to work, so those were the only tests I could do.
During the week end I will stress these sticks of ram as far as I can!

The only thing I can add at the moment, is that I need 1,82v to be perfectly stable @1200MHz.

[Slyr7.62]

Wow, these OCZ sticks are insane. Good results.

[railmeat]

dang i cant belive this...now im on the fence what to do with my setupi got these 8 gigs of crucial running REALLY good but sheesh this ocz stuff at 1200 at 1.8-1.9.....thats simply incredible

any diff between the platium and blade 9600 series?ics the same?same speed and timings looks like to me...dam thats some nice stuff :P


good work tony.u make gaming faster!