Well i took your advice guys and got 3x30gb vertexs i should get them tomorrow. I love living in ny
Thanks you all for the great help.
Well i took your advice guys and got 3x30gb vertexs i should get them tomorrow. I love living in ny
Thanks you all for the great help.
If your on ICH10R they should saturate your on-board raid nicely. I might also add another drive, and then wait for a mobo that supports sata 3 and buy another 3 vertex's and saturate the onboard raid 0 again.
(just need a 8 sata ports board Lol)
AMD may be the first to release sata 3 capable boards.
Hey guys, I'm thinking of getting 2 or 3 30gb Vertex drives and using Raid 0 as I'm really impressed by the performance figures I'm seeing in this thread.
Would my UD3P Raid controller allow me to reach 500-600mb /s with these drives, or would I need to buy a raid controller?
My single 60g OS vertex drive makes my computer run a lot smoother than my overclocked computer with watercooling and hard drives ever did. That's for sure. I will probably add another one in the next few months, but it really isnt even necessary except for added storage space.
MM H2gO - Win 7 Pro
2 PA120.2 Thermochill
MCP355 w/XSPC res top
i5-2500k @ 5.0ghz w/Heatkiller 3.0
Corsair HX850 - M IV Gene-z
GTX 480 w/DD 480 ni/cu
nope, you don't need a controller.
NICE!! Alright then. I'm waiting until the semester ends and then jumping on the SSD bandwagon.
Hopefully by then the Vertex V2 will be out so I can max out that SATA 2 bandwidth. Otherwise, 3 Vertex V1s for the win.
Here is (3) 30GB vertes's (firmware 1199) on the ICH10r of my P5Q-D
Windows 7 full install plus drives and some applications. About 30GB of 91GB used, and no OS tweaks.
Last edited by gergregg; 03-19-2009 at 02:41 PM.
Asus Rampage III Formula
I7 970 (200x23=4610)
EK Supreme HF Copper
Swiftech 420 QP w/ (4) Scythe GT AP-15 (1850 RPM)
Swiftech 355 w/ ek X-Top v2
(3) Asus 5850 (1050/1250/1.3v)
(3) EK 5850 FC
Swiftech 220 QP w/ (2) Scythe GT AP-15 (1850 RPM)
Swiftech 355 w/ ek X-Top v2
Cosair HX850
(3) 2GB Gskill F3-12800CL7T-6GBPI
(1) Intel X25-M G2
(3) WD Black 1TB
I'm considering getting (2) of the 60GBs to use with my EVGA x58 Classified
These drives have been great thus far. My windows 7 boot time went from 72.883 seconds with my 74GB raptor to 19.671 seconds with my vertex array using the attached boot timer program.
Asus Rampage III Formula
I7 970 (200x23=4610)
EK Supreme HF Copper
Swiftech 420 QP w/ (4) Scythe GT AP-15 (1850 RPM)
Swiftech 355 w/ ek X-Top v2
(3) Asus 5850 (1050/1250/1.3v)
(3) EK 5850 FC
Swiftech 220 QP w/ (2) Scythe GT AP-15 (1850 RPM)
Swiftech 355 w/ ek X-Top v2
Cosair HX850
(3) 2GB Gskill F3-12800CL7T-6GBPI
(1) Intel X25-M G2
(3) WD Black 1TB
Me too. Love my new Veterxes! Holy crap they're fast.
MAIN: 4770K 4.6 | Max VI Hero | 16GB 2400/C10 | H110 | 2 GTX670 FTW SLi | 2 840 Pro 256 R0 | SB Z | 750D | AX1200 | 305T | 8.1x64
HTPC: 4670K 4.4 | Max VI Gene | 8GB 2133/C9 | NH-L9I | HD6450 | 840 Pro 128 | 2TB Red | GD05 | SSR-550RM | 70" | 8.1x64
MEDIA: 4670K 4.4 | Gryphon | 8GB 1866/C9 | VX Black | HD4600 | 840 Pro 128 | 4 F4 HD204UI R5 | 550D | SSR-550RM | 245BW | 8.1x64
I got the older 0112 firmware from Tony, hopefully I'll be able to install Windows and actually keep it running for more than a few minutes.
Looks like FW1275 has been pushed back.
Sony KDL40 // ASRock P67 Extreme4 1.40 // Core i5 2500K //
G.Skill Ripjaws 1600 4x2Gb // HD6950 2GB // Intel Gigabit CT PCIe //
M-Audio Delta 2496 // Crucial-M4 128Gb // Hitachi 2TB // TRUE-120 //
Antec Quattro 850W // Antec 1200 // Win7 64 bit
MAIN: 4770K 4.6 | Max VI Hero | 16GB 2400/C10 | H110 | 2 GTX670 FTW SLi | 2 840 Pro 256 R0 | SB Z | 750D | AX1200 | 305T | 8.1x64
HTPC: 4670K 4.4 | Max VI Gene | 8GB 2133/C9 | NH-L9I | HD6450 | 840 Pro 128 | 2TB Red | GD05 | SSR-550RM | 70" | 8.1x64
MEDIA: 4670K 4.4 | Gryphon | 8GB 1866/C9 | VX Black | HD4600 | 840 Pro 128 | 4 F4 HD204UI R5 | 550D | SSR-550RM | 245BW | 8.1x64
4670k 4.6ghz 1.22v watercooled CPU/GPU - Asus Z87-A - 290 1155mhz/1250mhz - Kingston Hyper Blu 8gb -crucial 128gb ssd - EyeFunity 5040x1050 120hz - CM atcs840 - Corsair 750w -sennheiser hd600 headphones - Asus essence stx - G400 and steelseries 6v2 -windows 8 Pro 64bit Best OS used - - 9500p 3dmark11(one of the 26% that isnt confused on xtreme forums)
So I picked up a 30GB OCZ Vertex from Newegg in the recent sale, I plan on using it as an OS drive.
Any tutorials on how to install XP Pro on it and configure the best way possible? There's so much to wade through on OCZForums. Alternatively, I may decide to install Windows 7, or restore an Acronis image of my existing Windows 7 installation. Best way to accomplish that?
Ok, so the people that have only one vertex, is the stuttering is an issue? I sold my titan drive after 2 weeks cause of that issue. I mean is it gone completely like I can stream HD content and it won't stutter at all, on the titan I can't even watch a youtube video without it stuttering. Man so tempted to get 2 or 3 of these drives, I'm never gonna save up any money if I keep looking at the posts.![]()
Last edited by StickyRICE; 03-21-2009 at 10:34 PM.
i7 940/Rampage 2 Extreme/Corsair 6g Dominator/Corsair HX100W/GTX 580/SSD
Did you even bother reading the rest of the thread Rice?
Hi!
one doubt.
Last week I see a comparative between vertex and intel, and the guy who makes the comparative, also make another comparative between stripes sizes, I was looking for 2 hours but I dont see that post, anyone have the link?
Thanks
I have 3 30gb Vertex coming my way... I hate ordering on fridays though!
Core i5 760 | Corsair H70 |Gigabyte H55N USB3 | 2x2gb GSKill Ripjaws 1600mhz C9 |ATI Radeon 4890 1GB | OCZ Vertex 2 120gb | Samsung Spinpoint F4 2TB | Silverstone SG05 450BB
My Heat
http://heatware.com/eval.php?id=25800
Firmware 1275 is out
http://www.ocztechnologyforum.com/fo...ad.php?t=52848
Bookmarks