Haruhi - Naekuh's New Queen

[NaeKuh]

Starting on a Rebuild.

Case: Mountain Mods U2 + Pedistool (norris i see why u sold it, its Fin HUGH)

Hardware:
Motherboard: eVGA X58 -> Going to step up to classified if it ever comes out. *bbai CRAPSUS forever~*
Ram: *waiting for my OCZ Reapers*
CPU: i7 965 -> Stepping up to an i7 975 in a few weeks.
Hard Drive: 3 Raptors only, RAWR Skinnee is making me pull off 2
VideoCard: 2 x HD4870X2
PSU: Dual PSU PCnC 1KW SR on board and GPU + Antec NEO 500 on everything else.

Cooling
PA120.3 + PA160 on cpu loop. <-- yes im being serious. Yes i know its uber overkill.
MCR320 + MCR220 on GPU loop
Possibly a RX120 or 120GTS on my Board / Ram loop.

Pumps:
Dual DDC-2 package on CPU loop
Dual DDC-3.2 in series on GPU loop
DDC-3.2 on board loop.

Blocks:
DD HD4807X2 on gpu's.
Koolance-350 on cpu (got a new prototype injector from dean, so i will be testing this out).
Custom Classified Blocks (WHEN STUPID BOARD COMES OUT)

Pics to follow, still trying to sort some stuff out

Notes: I am using clamps in this build, and i am using expensive tubing. Probably my last time using expensiving tubing.
50 dollars in tubing is absolute BS.

[NaeKuh]

Old pics, so please bare with me :P

Case:




Ugh i need to get this powder coated. :\


Norris this thing is rediculously tall:


CPU until i recieve my 975:


Hard drives:


GPU's (will remove them):


Monitors: 24 inch Gateway 2485W


Fans: San Aces and Yates Of course


UPS (i'll take better pictures of these guys later, i have 1 more i need to show off also. :P)


Prototype KL Stuff, (stock nozzle on the way right), Prototype Backplate + nozzle is listed.


Board and Ram still in transit.

H20 Gear:
Cpu Pump:


Gpu pumps:
However i got this on a 250mm tube with pump in my system right now (i'll take a pic of this later).


Additional pumps i was gonna throw at my system:


Koolance Res:


Should make that 6 pumps, however i think its only gonna be a 5 DDC system.
2 CPU + 2 GPU + 1 Board

*more pics to come as fedex drops off my package*

[NaeKuh]

*reserved for start build*

[NaeKuh]

Oh incase someone wants to know why i am calling it crapsus.

3 friends of mine, and i have this problem.

Bios and windows only shows 4gb. cpu-z registers all 6, and yes ive checked my dayam pins. There fine.



UGH.... removal of old hardware and cleaning is gonna be a PITA.

[TedShred]

I was waiting 'til I was sure you'd reserved the requisite space before I expressed my eager anticipation.

Woo hoo!

- this should be pretty cool

[SNiiPE_DoGG]

Asus is shyte for sure DFI/EVGA/FOXCONN

[NaeKuh]

disassembly and cleaning will start today.

Ive already started looking at cut points.

The only thing that kinda bugs me is my pedistool is glossy black.
I may send it out for powder coating once my chiller arrives tho. <-- oh yes i have a chiller but i dont think it will be done in time for this build. :P

[N19h7m4r3]

I love Asus, never had a prob. But then again I'm an AMD lover

You really like WD Don't you NaeKuh? Some serious storage there

[sniperbob]

i've been waiting for this log to pop up. Should be a good build.. Good luck on Haruhi!

[Rise]

sounds awesome.

where do you get these names from?

[NysoO]

Nice Naekuh. Make this build special. Take your time with all the steps that it convey. I know you like functionality a lot, but as I said, take your time and do everything throughly.

[NaeKuh]

Prototype KL Stuff:



The sharpied ones are the ones im gonna ask bei to drill holes in professionally.

Im gonna take a guess and say i think the ones with dots around and in the middle will probably give me the best performance but worst flow rate.

Nice Naekuh. Make this build special. Take your time with all the steps that it convey. I know you like functionality a lot, but as I said, take your time and do everything throughly.

LOL.. :T

if i wasnt on this build, i wouldnt of gotten 50 dollars in tubing + Koolance Clamps now would i?

Yeah i will take my time on this one. Its gonna be a while, just found out my board is stuck in transit.

[Polizei]

Um, dual 1kW PCP&C and a 500W Antec? Never in the life of that computer will it ever draw even half of 2500w.

[NaeKuh]

Um, dual 1kW PCP&C and a 500W Antec? Never in the life of that computer will it ever draw even half of 2500w.

no dual PSUs 1 PCnC 1kw + Antec 500W.. not 3 psu's.

And yes i was overloaded it on a single PCnC 1KW SR. Ask Skinnee and Gillbot.

[Expat GriZ]

Starting on a Rebuild.
Custom Classified Blocks (WHEN STUPID BOARD COMES OUT)

@ NaeKuh.....Dood , always enjoy looking at your builds!! This looks like it will be another humdinger!!!! Can you enlighten me on the "custom blocks" for the classified? Will they be available to the rest of us as well as I'm fanging to buy this board!!

[NaeKuh]

@ NaeKuh.....Dood , always enjoy looking at your builds!! This looks like it will be another humdinger!!!! Can you enlighten me on the "custom blocks" for the classified? Will they be available to the rest of us as well as I'm fanging to buy this board!!

as soon as i get it, ima send it to bei to have him draft it.

I dont know, we had some problems with the P6T, so bei might do a case by case thing on this.

But i will most definitely post a thread when i get it started.
As i said i have no idea when and if the classified is ever gonna come out.

Of course if koolance makes one, i will most likely get that tho. :P

[Polizei]

no dual PSUs 1 PCnC 1kw + Antec 500W.. not 3 psu's.

And yes i was overloaded it on a single PCnC 1KW SR. Ask Skinnee and Gillbot.

I was going to say.

Um, proof that the 1kW SR was overloaded? I just find it hard to believe because those are 1kW continuous and 1.1kW peak so that's a lot of power.

[[XC] Hicks121]

OMG!!! Your actually going to put something together & have a working computer!!!

[NaeKuh]

I was going to say.

Um, proof that the 1kW SR was overloaded? I just find it hard to believe because those are 1kW continuous and 1.1kW peak so that's a lot of power.

Yes i know..

But my system kept tripping my UPS, and then would restart.

I dont run cheap UPS's either:




This problem kept happening until i split load on that psu.

I asked Skinne to help explain, because he was sitting there with me on IMs while i was ranting to him about it.

skinnee's advice was get rid of the 2 HD X2's i told him NO WAY, i'll grab another PSU.

[moogle]

where do you get these names from?

Part names? Manufacturers website probably
Build names? Anime!!!!!!!

[SNiiPE_DoGG]

You better get your sleeve on in this one bud seriously.

[NaeKuh]

You better get your sleeve on in this one bud seriously.

i have Fesser UV + Primochill LRT + XSPC Clear UV coming in. :X

Im gonna have a UV led Cap on my Koolance res, so my water will emit a UV light inside my case and hopefully light up my tubing.

I may imitate a murder mod sleeving on my dual psu splitter.

I havent decided yet, but i think skinnee wont let me go on this if i dont.

sounds awesome.

where do you get these names from?

http://en.wikipedia.org/wiki/The_Mel...uzumiya_(anime)

"2006 television anime about a girl who, unbeknownst to her, possesses the power to change reality. "

in short, she's a god whose in highschool and when she goes though PMS, she destorys a world in closed space.

[Expat GriZ]

If I try to run Furmark with 2 4870X2's on my bench rig it trips out an Antec 1000. Tracked it down to the power supply, now have the WC on a 550 and the board on the Antec.

[NaeKuh]

If I try to run Furmark with 2 4870X2's on my bench rig it trips out an Antec 1000. Tracked it down to the power supply, now have the WC on a 550 and the board on the Antec.

YEAH!

exactly my problem!

Only my CPU is sometimes at load 100% too.

[SNiiPE_DoGG]

I use LED caps in my reservoirs in permafrost and TTYTT it doesnt do much :\ you really need the cathodes to get the glow to happen at all. not that you dont have room for cathodes