With threads like this we see why your name is in green!
One of the few people here that have a total understanding of the systems and why you get what most can not.![]()
With threads like this we see why your name is in green!
One of the few people here that have a total understanding of the systems and why you get what most can not.![]()
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X
Heh that poor stick is flying, nice work. Nice SPI32M run too that's fantastic efficiency. Any idea how well samsung HCF0 IC's withstand vdimm like 2.025v long term?
Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X
Thanks
Samsung HCF0 handled 1.9-2.0 fine on X48 and has no probs on X58 for benching. Wouldn't run it 24/7 though
did some DMM measurements and seems both BIOS, SG and CPUZ with vdroop disabled over report real volts - so above benchies were actually using less vcore than stated hehe
PSU = HX1000
- Vcore over reports slightly in VDROOP Enabled mode, but severely over reports with VDROOP Disabled i.e. 1.23v bios/SG reported = 1.206/1.203v idle/load DMM measured!
- VDIMM over reports by 0.005v
- CPU VTT undervolts by 0.012v to 0.014v at idle but jumps 0.009v higher under windows load but still is 0.005v under volted under load compared to what is set in bios
Last edited by eva2000; 01-26-2009 at 08:44 AM.
---
Very nice overclocking on air!
you going to push it on sub zero?
"If It Doesn't Overclock Its Broken"
"NexGen Overclocking"
"Overclocking, its a life style"
Thanks !
Eventually might try single stage 1/4HP (never used DI/LN2 before), but I usually take my time with a new setup air then water to get to know every part of the system - especially focusing on my favourite part = memoryThat and I still have my 2nd i7 920 3836A756 to test on same air cooling to see how it compares to the above identical batch sibling
![]()
---
I'm afraid a 1/4hp won't cut it.. my 1/3hp is struggling madly and it's already tuned for the highest possible load it can cope with (= 280W) ...
Of course, for your kind of short-load quick benching, it might just do![]()
Bookmarks