MMM
Page 1 of 4 1234 LastLast
Results 1 to 25 of 95

Thread: what happens when you leave the pc alone for a year+ (56k warning)

  1. #1
    Xtreme Enthusiast
    Join Date
    Sep 2006
    Location
    brazil
    Posts
    829

    what happens when you leave the pc alone for a year+ (56k warning)

    So it was time to take Lee Kwid apart ... RIP dirty one

    I am not by any means proud of the pics you are about to see, but you guys helped me out from the start, its only fair that you get to see how it ended.

    The pc ran 24/7 for a little over one year (non stop). The original mix was distilled water + pentosin + 3 drops of pt nuke. I have to say that on the first months I wanted to leave it alone, was sort of affraid to mess things up and was happy it was working well. In the last few months I could care less about the pc. As long as it was still running I had much bigger things to worry about. I just hoped for it to last until I was ready to build a new machine and go back to air. And so it ran untouched...until today.

    btw during this time:
    - I only re-filled with distilled water when the level was too low;
    - My res used to stay open because of some issues I had with my drain port (stupid but true);
    - I never fully drained the system to replace fluid, I never added more Pentosin nor PT nuke to the loop;
    - The side panel was open for the last 4 months because of a problem with the dominator fans being hooked behind the mobo;
    - Temps were actually fine...not as good as they used to be of course, but it never really bugged me;
    - Yes I do have a cat;
    - I live in a (very) warm country, can't keep the windows closed and during this year two huge commercial buildings were constructed next to my house;
    - Enough excuses, pics:

    pic from the first day:




    and the ones from today:




    Green Tygon?


    At least the rad is still clean on this side








    stained tygon next to unused leftovers






    DDC engraved gel pad? lol




    at least no clogged jets..


    and no left over gunk


    same goes for the MCW60


    and the fans....no subtitles required























    what more can I say... we all seen dirty rads before, but I guess it also goes to show that if you HAVE to leave it alone for a long time, it still works..


    E8600 - Maximus Formula II - HIS 4870x2 - Mushkin DDR2 1066 2x2GB - Silverstone DA 850W - Silverstone TJ09 - TRUE Black

  2. #2
    I am Xtreme
    Join Date
    Dec 2007
    Posts
    7,750
    dude i have dust problems too, but that dosnt look like dust, that looks like fur.

    how many cats do you have?

  3. #3
    Xtreme Member
    Join Date
    Jun 2008
    Posts
    450
    holy ing dude!!!! how did the tygon turn green!!!??? and thats one dirty rad! do you smoke? looks like you smoke alot i bet its all sticky lol

    one thing i hate the most is fixing a smokers computer! everything gets sticky and real dirty inside....

    btw it looked very nice in the beginning....

  4. #4
    Xtreme Enthusiast
    Join Date
    Apr 2008
    Location
    Anti-SoapBoxVille
    Posts
    744
    Not as bad as some rig's i've "repaired" in my time but.... yes, dirty!

  5. #5
    Banned
    Join Date
    Feb 2008
    Location
    Slappyville - North Bay,CA
    Posts
    833

    Smile

    YummY !
    I just lost my lunch !!!
    darn.. Now my shoes are full of Puke !



    Edit: Is that Jungle Junk growin' in the Rad ! I swore I seen IT MOVE !
    Last edited by bigslappy; 10-11-2008 at 01:51 PM. Reason: It's growin' ........... I'm scared !!!

  6. #6
    Xtreme Addict
    Join Date
    Apr 2008
    Location
    Ottawa, Canada
    Posts
    2,443
    Whoa .....That is a very messy rad. It's a cross between a cat and a rad. Feed it some treats and see if it eats some. Just morbid curiosity!

  7. #7
    Chasing After Diety
    Join Date
    Jan 2007
    Location
    Absolutely Speachless :O
    Posts
    11,930
    wash the fans in water.

    dont worry about submerging them.

    Thats how i clean the fans out.

    Also the radiator. i take a garden hose and use pressurized water to blast all the fur away from the fins and allow the fans and rad to bake out in the sun to dry.

    if i need to pick between my dog and dust, my dog will always win.

    So i learned a few tricks to make maintence easier.
    Nadeshiko: i7 990 12GB DDR3 eVGA Classified *In Testing... Jealous? *
    Miyuki: W3580 6GB DDR3 P6T-Dlx
    Lind: Dual Gainestown 3.07
    Sammy: Dual Yonah Sossoman cheerleader. *Sammy-> Lind.*

    [12:37] skinnee: quit helping me procrastinate block reviews, you asshat. :p
    [12:38] Naekuh: i love watching u get the firing squad on XS
    Its my fault.. and no im not sorry about it either.

  8. #8
    Xtreme Addict
    Join Date
    Oct 2005
    Location
    England, Northwest
    Posts
    1,219
    Your water / res is in a lot better condition than mine is - I am using just de-ionised water and PT Nuke yet after only a short while I get white powerery stains on everything which has to be physically removed.

  9. #9
    Registered User
    Join Date
    Oct 2008
    Location
    Sarnia, Ontario, Canada
    Posts
    29
    Looks like the fans hit puberty!
    Upcoming Build...
    Case: Thermaltake Chaser MK-1 | PSU: XFX Pro Series 1050W Black Edition | CPU: Intel Core i5 3570K Ivy Bridge
    Cooler: Corsair H100 | Mobo: MSI Z77A-GD55 | RAM: 16GB Corsair Vengeance DDR3 1600MHz
    Video: MSI GTX 660Ti Power Edition OC 1019MHz 2GB GDDR5 | SSD: OCZ Vertex 4 128GB
    HDD: Seagate Baracuda 250GB | DVD: Samsung SH-S223Q/BEBN
    KB: Razer Lycosa | Mouse: Razer Deathadder | Pad: Razer Goliathus Control [Extended]
    Headset: Razer Carcharias

    First Liquid Cooled Build (from 2008) - SOLD
    Case: Antec 1200 | PSU: Antec Truepower Quattro 850W | CPU: Intel E8500 | Mobo: ASUS Striker II Formula | RAM: 8GB OCZ Platinum XTC Dual Channel DDR2-800
    Video: BFG Geforce GTX260 MaxCore OCX | HDD: Seagate Baracuda 250GB SATA | DVD: Samsung SH-S223Q/BEBN Lightscribe SATA
    Pump: Swiftech MCP655 | CPU: Swiftech Apogee GTZ | Video: Koolance VID-428 Full Cover
    Rad: Feser X360 w/Scythe Ultra Kaze 1000rpm | Res: EK Multioption 250 Rev.2 w/Anti-cyclone insert

  10. #10
    Xtreme Enthusiast
    Join Date
    Sep 2006
    Location
    brazil
    Posts
    829
    Quote Originally Posted by Manicdan View Post
    dude i have dust problems too, but that dosnt look like dust, that looks like fur.

    how many cats do you have?
    Quote Originally Posted by KaptCrunch View Post
    must have lots a animals in the home with that amount of hairs or grow-ops near by
    just one.. I never find this much fur anywhere. I have an air purifier in that room and the filters are never ever this bad. Now I know where all the fur goes...lol

    Quote Originally Posted by xTKxhom3r View Post
    how did the tygon turn green!!!??? and thats one dirty rad! do you smoke? looks like you smoke alot i bet its all sticky lol

    btw it looked very nice in the beginning....
    no idea and

    thanks! it was so shiny

    Quote Originally Posted by gillbot View Post
    Not as bad as some rig's i've "repaired" in my time but.... yes, dirty!
    thats a relief lol

    Quote Originally Posted by bigslappy View Post
    YummY !
    I just lost my lunch !!!
    darn.. Now my shoes are full of Puke !



    Edit: Is that Jungle Junk growin' in the Rad ! I swore I seen IT MOVE !
    SORRY!!

    Quote Originally Posted by Sadasius View Post
    Whoa .....That is a very messy rad. It's a cross between a cat and a rad. Feed it some treats and see if it eats some. Just morbid curiosity!

    E8600 - Maximus Formula II - HIS 4870x2 - Mushkin DDR2 1066 2x2GB - Silverstone DA 850W - Silverstone TJ09 - TRUE Black

  11. #11
    Xtreme Member
    Join Date
    Aug 2008
    Location
    Honolulu, Hawaii :D
    Posts
    146
    doh! That is the nastyiest thing I've ever seen, I feel dirty just looking at it, better go clean my loop now
    Under the influence of being Over the Edge!

    Doomsday Rig:
    TJ10ESA 1200w Zeus
    Evga 790i Ultra SLI
    Qx6700,6850,9650,9700 5.1ghz-5.4ghzDICE
    OCZ 9-9-9-28 1.8v 2000mhz 2x1gb
    Evga 9800gx2X2
    BFG Ultra OC X2
    150gb RaptorX6
    Areca 1220 Raid 0
    Xonar X2
    QuadBoot xp'z-VistaUlt'z

  12. #12
    Xtreme Addict
    Join Date
    Aug 2008
    Posts
    2,036
    Wow, that truly makes me appreciate my air compressor!

    It's amazing that temps didn't go up.

  13. #13
    Xtreme Enthusiast
    Join Date
    Sep 2006
    Location
    brazil
    Posts
    829
    Quote Originally Posted by NaeKuh View Post
    wash the fans in water.

    dont worry about submerging them.

    Thats how i clean the fans out.

    Also the radiator. i take a garden hose and use pressurized water to blast all the fur away from the fins and allow the fans and rad to bake out in the sun to dry.

    if i need to pick between my dog and dust, my dog will always win.

    So i learned a few tricks to make maintence easier.
    thanks NaeKuh, appreciate the suggestions. I got rid of the dust and cleaned the rad but still need to soak the fins, hopefully tomorrow will be sunny too..

    You are not saying that you wash the fans without even taking them apart are you? sorry.. I am that clueless..

    E8600 - Maximus Formula II - HIS 4870x2 - Mushkin DDR2 1066 2x2GB - Silverstone DA 850W - Silverstone TJ09 - TRUE Black

  14. #14
    Banned
    Join Date
    Apr 2008
    Location
    Brisbane, Australia
    Posts
    3,601
    Great thread dude. Yeah I already have dust on my rads. When I pull this rig apart after my exams it's going to be a hairy situation, literally.

  15. #15
    Xtreme Enthusiast
    Join Date
    Sep 2006
    Location
    brazil
    Posts
    829
    Quote Originally Posted by MomijiTMO View Post
    Great thread dude. Yeah I already have dust on my rads. When I pull this rig apart after my exams it's going to be a hairy situation, literally.
    Thanks man! The ironic part is that I took over TWO WEEKS to get the rad clean before installing it


    I can't keep up with the replies

    will grab some popcorn and let you guys go at it lol

    E8600 - Maximus Formula II - HIS 4870x2 - Mushkin DDR2 1066 2x2GB - Silverstone DA 850W - Silverstone TJ09 - TRUE Black

  16. #16
    Banned
    Join Date
    Oct 2006
    Location
    Houston, Texas
    Posts
    1,037
    Thanks for posting the great photos. The dusty rads really show the fan "dead spot" very well.

  17. #17
    Registered User
    Join Date
    Jul 2006
    Location
    Earth
    Posts
    63
    That’s actually the most disgusting thing I’ve seen come computers, I mean, seriously; it made me feel sick. I was doing kind of ok until that extreme close up shot on the rad appeared on my screen…yuck.

  18. #18
    Xtreme Member
    Join Date
    Jan 2008
    Posts
    379
    Nice photos, when I got to the fans I was like eh not bad, been there done that, scroll down a few...was like WHOA! the Rad was something!
    Cooler Master Haf X
    i5 3750k
    Asrock Xtreme 4
    660 Ti

  19. #19
    Xtreme Enthusiast
    Join Date
    Aug 2007
    Posts
    668

  20. #20
    Xtreme Addict
    Join Date
    Apr 2008
    Location
    Ottawa, Canada
    Posts
    2,443
    Should make a retro 70's :banana::banana::banana::banana: with that rad as your star....Sure is hairy enough!

  21. #21
    Xtreme Member
    Join Date
    Jun 2008
    Posts
    450
    man i love that close up pic on the rad looks ing sweet post some more!! lol btw we should make this a nasty rig post

  22. #22
    Hamster Powered
    Join Date
    Apr 2006
    Location
    Virginia, USA [Krunching since 2001]
    Posts
    7,623
    Hoax,

    How have you been my friend? It has been a long time since we heard from you. I trust you will be a little more diligent this time concerning periodic maintenance.
    XSWCG Disclaimer:
    We are not responsible for the large sums of money that you WILL want to spend to upgrade and add additional equipment. This is an addiction and the forum takes no responsibility morally or financially for the equipment and therapy cost. Thank you and have a great day.

    Sigmund Freud said... "Failure to CRUNCH is a sign of Sexual Inadequacies".

  23. #23
    I am Xtreme
    Join Date
    Aug 2008
    Posts
    5,586
    excellent photography

  24. #24
    Moderator
    Join Date
    Nov 2006
    Posts
    1,217
    I have done the same but mine has run for over a year and is filled with feser one...i gotta do pics of that soon

  25. #25
    Registered User
    Join Date
    Aug 2006
    Posts
    5,855
    Don't feel bad. Its not that bad. I've seen a lot worse.

    Between my pets and my computers, I would take the computers to the trash dump any day.

Page 1 of 4 1234 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •