I just meant so you could go for max clocks using CAS 5, you're board/cpu limited on that AMD setup IIRC.
I just meant so you could go for max clocks using CAS 5, you're board/cpu limited on that AMD setup IIRC.
Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X
Originally Posted by Sabuy-Sabuy
Just to clarify, AMDs don't have x.5* dividers for the RAM so it was running at CPU/9There is NO FORCE I shall believe in this! It must be fake. If it wasn't, on Intel P35 chipset it would do about ~ 625 CL3
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
My OCZ cas3@1216mhz with 2.16v.Will buy Amd 5400 BE and try to hit cas3@700mhz
Cpuz valid
http://valid.x86-secret.com/show_oc.php?id=359641
x.5 multis give bugged RAM speeds, you're nowhere near 600MHz
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
600MHz C3
End!
One stick is now faulty, please don't ask about voltages...
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
Thats 560 mhz,not 600
Oops
600MHz 3-3-3-9
END!
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
Hi guys,
here are some results i was able to reach with my lovely OCZ Reaper
After beeing limited by my 680i LT Mainboard, i just grabed a pencil and did some little mods at it.
SuperPi 1M - 537.1Mhz CL3-3-3-2
Validation - 545.2Mhz Cl3-3-3-8
http://valid.x86-secret.com/show_oc.php?id=418952
Specs:
OCZ Reaper PC6400 CL3-4-4-15
XFX 680i LT @ P32 Bios
Vdimm=2.67(BIOS Reading) / 2.73(DMM)
SPP-Voltage=1.62V
Last edited by mAlkAv!An; 09-21-2008 at 01:44 PM.
i do not believe the amd valids or screenshots. theres a bug i will say. what kind of cooling did you use?
cpu: 2600k@ 4.5ghz
mobo: asus p8p67 deluxe
ram: gskill ripjaw x F3-10666CL7D-8GBXH
gfx: gigabyte gtx460
psu:corsair 520hx
case: antec 900
cpu cooling: Prolimatech Megahalems Rev.B
500mhz cas 3 club: http://valid.x86-secret.com/show_oc.php?id=235630
p4 511 2.8ghz@ 5004mhz :http://valid.x86-secret.com/show_oc.php?id=124434
p4 541 3.2ghz@ 4909mhz :http://valid.x86-secret.com/show_oc.php?id=157470
I did not use any cooling kit on this Ram .I am going on to mod a new cooling kit for it .Hopefully i can get a better Mhz
wondering if this club is reserved for 1 gig or more sticks only - i have some pretty epic older fat body corsair sticks around that i wouldn't mind running on a death mission - these puppies do ddr2-1100 at cas4 at pretty low volts
Dont think I posted my old result here..
Motherboard: DFI LP DK X48-T2RS
Processor: E8400
Memory: Crucial Balllistix PC8000 [2.2V Stock] @ 512MHz with 2.95V
http://valid.x86-secret.com/show_oc.php?id=371093
Didnt try Pi1M as I was just aiming for highest possible. 525MHz [3.0v] file was corrupt as I as usual tried 530 right after that.. GREED
Well this afternoon I tried my RAM on a Commando... Boot at 500MHz C3 2.9v, SetFSB up to 510MHz and Pi . Any higher would lock up around iteration 3. Like an idiot I tried more than 3v and *sigh*
This isn't the first time they haven't booted after being abused so I'm holding thumbs
@ Natedog, all AMD results on a 4.0 or x.0 multplier are bugged as AMDs don't have CPU/4 or CPU/x.5 dividers. AMDs calculate the RAM speed from the CPU speed, unlike Intels which calculate it from the FSB.
I don't know what to make of the 680i result though. If it's correct his RAM is even better than mine :\
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
It works again
One fairly long BIOS clear later and I could boot again, so straight back up to 2.46v real and I got his quickly:
Validation - 504MHz C3
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
It says 4-4-4-4 in the validation
Very strange. I'll take a photo tonight
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
Actually the 680i chipsets are known for good RAM OC, espacially with low latencies.
I can just tell you that my results are no fake; besides it's just on stick running that well.
Max. validation in DC is about 520Mhz
Without ANY cooling?
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
Just the typical heatpipe of all ocz reaper modules and some case fans.
For more voltage i will probably put a little fan dircetly on the ram, but anyway this would be only for validation and not under load
My OCZ cas3@1216mhz with 2.16v
Gold.
That's incredible, well done! Those sticks are excellent.
What is the current CL 3 WR on an intel platform?
Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X
650 3-4-4-x SC.
These sticks are very volt friendly, three trips to almost 3v with no bad side effects
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
650 CL 3 is insane, happen to have link for that? You are very lucky with those sticks, I have seen some D9's (Ballstix 8000's) degrade after 10 mins at 2.45v with an 80CFM fan on them. Do you run yours with or without heatspreaders?
Last edited by CryptiK; 09-23-2008 at 05:53 AM.
Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X
I have a spot cool on mine is this good enough for 2.6v~ and 24/7 life?
_____________________________________________
Rig = GA-P67A-UD3P Rev 1.0 - 2600K @ 5.2~GHz 1.5v~, 1.489~v Under Load - Swiftech Water Cooling - 2 X 4GB Corsair DDR3 2000Mhz @ 1868MHz~ 9,10,9,27 @ 1.65v~ - Asus 6970 @ 950MHz / 1450MHz - 3x Western Digital RE3 320Gb 16Mb Cache SataII Drives in Raid0 - Corsair HX 850w Power Supply - Antec 1200 Case - 3DMark 11 Score = P6234 - 3DVantage Score = P26237
With. I've destroyed three sticks of BH-5 removing spreaders
I used DI for cooling.
Original French Link
Google Translated
LN2 cooling, P35 so no CAS/Memset bug
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
What is DI>? and if the with was at me, my G-Skill DDR2 1066 2X 2GB sticks in my sig. Thank you.With. I've destroyed three sticks of BH-5 removing spreaders
I used DI for cooling.
Original French Link
Google Translated
LN2 cooling, P35 so no CAS/Memset bug
_____________________________________________
Rig = GA-P67A-UD3P Rev 1.0 - 2600K @ 5.2~GHz 1.5v~, 1.489~v Under Load - Swiftech Water Cooling - 2 X 4GB Corsair DDR3 2000Mhz @ 1868MHz~ 9,10,9,27 @ 1.65v~ - Asus 6970 @ 950MHz / 1450MHz - 3x Western Digital RE3 320Gb 16Mb Cache SataII Drives in Raid0 - Corsair HX 850w Power Supply - Antec 1200 Case - 3DMark 11 Score = P6234 - 3DVantage Score = P26237
Posting Permissions
Reply With Quote
Bookmarks