MMM
Page 1 of 2 12 LastLast
Results 1 to 25 of 30

Thread: E8600 reached 6200mhz under cascade

  1. #1
    Xtreme X.I.P
    Join Date
    Mar 2005
    Location
    Belgium, Namur
    Posts
    1,864

    E8600 reached 6200mhz under cascade

    After the Aquamark run to 6ghz under cascade i tested max cpuz screen and super pi 1M with this awesome E8600
    http://www.xtremesystems.org/forums/...0&postcount=24



    CPUZ 6205mhz


    http://valid.x86-secret.com/show_oc.php?id=394808

    Maybe DDR2 limited ^^ i was @ 2.47v for 4-4-4- ...


    Super PI 1M 7.59s



    Configuration

    Intel Core 2 Duo E8600 es (E0)
    2*1go Crucial ballistix tracer PC8500 @ 2.5v
    VGA 1 X Jetway HD 4870 (880mhz GPU / 1150mhz GDDR5)
    PSU Gigabyte Odin 1200w
    Biostar Tpower I45 (Bios 0710)
    Cascade à -103°

    BIOS SETUP

    __O.N.E__
    Over-Clocking Navigator (Manual OverClock)
    Intel(R) SpeedStep(tm) : Disabled
    Ratio CMOS Setting : ×9
    CPU Frequency Setting : 600
    Over Clock Retry Count : 1
    FSB Finetune : Enable
    FSB(Bsel) To NorthBridge Latch : 1333
    DRAM Frequency : DDR2-1200
    DDR2 Enhance Mode : Auto
    __DRAM Timing Configuration__
    DDR2 RCOMP Configuration : 4
    Static tREAD Value : PL9
    Configure DRAM Timing by SPD : Disabled (4-4-4-12)
    __Clock Gen Configuration__
    PCIE Frequency Setting : 100
    CPU Clock Skew Control : 200ps
    (G)MCH Clock Skew Control : Auto
    CPU Clock Driving Control : Auto
    __Voltage Configuration__
    CPU Voltage : +0.65v
    DDR Voltage : +0.60v
    Chipset Voltage : +0.400v
    FSB Voltage : +0.35v (+0,400v linked by Chipset voltage)
    CPU Core1 GTL Ref Voltage : 0.63*VTT
    CPU Core2 GTL Ref Voltage : 0.67*VTT
    MCH GTL Ref Voltage : Auto
    CPU PLL Voltage : 1.5v
    Last edited by Pt1t; 07-29-2008 at 06:29 AM.
    ***** Visit us on PCWorld.fr *****

  2. #2
    Xtreme Addict
    Join Date
    Nov 2003
    Location
    Oslo, Norway
    Posts
    1,218
    good going there mate! 6157Mhz under cascade is okey

  3. #3
    Master of nebulah frost
    Join Date
    Dec 2004
    Location
    Dolomites(Italy)
    Posts
    2,238
    Fantastic!!!
    I'm fighting with my E8600+BO but I'm not be able to find a setup stable over 575FSB
    Battlefield 3: Nachthymnen666

  4. #4
    Xtreme Addict
    Join Date
    Nov 2003
    Location
    Oslo, Norway
    Posts
    1,218
    where are you guys getting those E8600..? I want one!

  5. #5
    Xtreme Guru
    Join Date
    Jun 2006
    Location
    Finland, joensuu
    Posts
    3,527
    Quote Originally Posted by dpa View Post
    where are you guys getting those E8600..? I want one!
    some shops in germany has them
    http://geizhals.at/eu/a312513.html
    Last edited by Solarfall; 07-29-2008 at 07:14 AM.
    Evga X58 sli under cascade
    http://www.xtremesystems.org/forums/...d.php?t=219788
    Evga X58 Sli ultimate overclocking/ overview/ discussion thread
    http://www.xtremesystems.org/forums/...d.php?t=221082


    proud owner of E8600 Q822A435

  6. #6
    Banned
    Join Date
    Feb 2008
    Location
    Buffalo, NY
    Posts
    1,609
    sick man!!! 6.2G on cascade!! get that thing under LN2!

  7. #7
    ODOC
    Join Date
    Aug 2006
    Location
    Copenhagen - Denmark
    Posts
    2,189
    Good work Thomas ...

    Keep pushing it...

  8. #8
    Xtremely Bad Overclocker
    Join Date
    Jan 2005
    Location
    East Blue
    Posts
    3,596
    wohaaa another great result out of this E8600 I am really tempted to get one as well but hot summer days here are just not the time for me to put hands on hardware
    | '12 IvyBridge - "ticks different"... | AwardFabrik IvyBridge round I by SoF | AwardFabrik IvyBridge round II by angoholic & stummerwinter
    | '11 The SandyBridge madness... | AwardFabrik / Team LDK OC-Season 2011/2012 Opening Event
    | '10 Gulftown LaunchDay OC round up @ASUS RIIE | 3DM05 2x GPU WR LIVE @Cebit 2010 @ASUS MIIIE | SandyBridge arrived @ASUS P8P67

    | '09 Foxconn Avenger | E8600 | Foxconn A79A-S | Phenom II 940 BE | LaunchDay Phenom II OC round up
    | '08 7.438s 1m LN2 | AMD 1m WR LN2 | 2nd AOCM | Phenom II teasing
    | '07 100% E2140 | 106.5% E2160 | 100% E4500 | 103% E4400 | 5508 MHZ E6850 | 7250 MHZ P4 641 126.5% by SoF and AwardFabrik Crew all on Gigabyte DS3P c? and LN2...
    | '06 3800+ X2 Manchester 0531TPEW noHS 3201MHZ c? | 3200+ Venice noHS 3279MHZ c? | Opteron 148 0536CABYE 3405MHZ c? all on Gigabyte K8NXP-SLI compressorcooled

    | '05 3500+[NC], 3000+[W], 2x 3200+[W], 3500+[NC], 3200+[V] 0516GPDW

    Quote Originally Posted by saaya
    sof pulled a fermi on all of us !!!

  9. #9
    Xtreme Member
    Join Date
    Mar 2008
    Posts
    473
    woah, have they hit the US yet?
    Quote Originally Posted by Bobbylite View Post
    with great MHZ comes great responsibility
    CPU:Q6600 G0 @ 3.825
    Motherboard:Asus P5E X38
    Memory:2x2GB OCZ Reapers DDR2 1066
    Graphics Card:Asus 4850
    Hard Drive:2xSegate 500gb 32MB Cache raid0
    Power Supply:Xion 800W
    Case:3DAurora
    CPU cooling: D-tek Fuzion V2 (Quad insert removed)
    GPU cooling: mcw60
    Monitor:24" LG

  10. #10
    Chasing After Diety
    Join Date
    Jan 2007
    Location
    Absolutely Speachless :O
    Posts
    11,930
    Quote Originally Posted by nachthymnen View Post
    Fantastic!!!
    I'm fighting with my E8600+BO but I'm not be able to find a setup stable over 575FSB
    you having problems with the chip or your system?

    Your chip should be the same step and revision as his.
    Nadeshiko: i7 990 12GB DDR3 eVGA Classified *In Testing... Jealous? *
    Miyuki: W3580 6GB DDR3 P6T-Dlx
    Lind: Dual Gainestown 3.07
    Sammy: Dual Yonah Sossoman cheerleader. *Sammy-> Lind.*

    [12:37] skinnee: quit helping me procrastinate block reviews, you asshat. :p
    [12:38] Naekuh: i love watching u get the firing squad on XS
    Its my fault.. and no im not sorry about it either.

  11. #11
    Master of nebulah frost
    Join Date
    Dec 2004
    Location
    Dolomites(Italy)
    Posts
    2,238
    Quote Originally Posted by NaeKuh View Post
    you having problems with the chip or your system?

    Your chip should be the same step and revision as his.
    99% system
    Really fast test under LN2:

    Over 575FSB I'm really unstable, maybe my problem is memory settings or NB cooling because with 6X multi I've same problems.
    Need to try also a P45 board
    Last edited by nachthymnen; 07-29-2008 at 10:30 AM.
    Battlefield 3: Nachthymnen666

  12. #12
    Chasing After Diety
    Join Date
    Jan 2007
    Location
    Absolutely Speachless :O
    Posts
    11,930
    rofl... good, cuz you jacked my loaner! :P

    That better be a good chip.


    HOLY COW 1.256Vcore?!?!?!?!?!
    Nadeshiko: i7 990 12GB DDR3 eVGA Classified *In Testing... Jealous? *
    Miyuki: W3580 6GB DDR3 P6T-Dlx
    Lind: Dual Gainestown 3.07
    Sammy: Dual Yonah Sossoman cheerleader. *Sammy-> Lind.*

    [12:37] skinnee: quit helping me procrastinate block reviews, you asshat. :p
    [12:38] Naekuh: i love watching u get the firing squad on XS
    Its my fault.. and no im not sorry about it either.

  13. #13
    Xtreme Member
    Join Date
    Feb 2006
    Location
    Portugal
    Posts
    427
    Amazing CPU there

    Dont you want to sale it? :P

  14. #14
    Xtreme X.I.P.
    Join Date
    Aug 2004
    Location
    Chile
    Posts
    4,151
    These chips are impresive i which i had one to play with, on a side note Coolaler got 64XXMhz for a suicide but i believe you benched Pi higher

  15. #15
    Xtreme X.I.P.
    Join Date
    Nov 2002
    Location
    Shipai
    Posts
    31,147
    damn these 8600s are sweet! congrats!

  16. #16
    Xtreme Addict
    Join Date
    Jan 2005
    Location
    belgium
    Posts
    1,735
    nice looking chip thomas

  17. #17
    Xtreme Enthusiast
    Join Date
    Oct 2005
    Location
    istanbul/Türkiye
    Posts
    826
    hey Thomas, when you will own LN2 man, at the end i will donate a dewar of LN2 and post you , nice chip!

  18. #18
    Master of nebulah frost
    Join Date
    Dec 2004
    Location
    Dolomites(Italy)
    Posts
    2,238
    NB is stock cooled?
    Battlefield 3: Nachthymnen666

  19. #19
    Xtreme X.I.P
    Join Date
    Mar 2005
    Location
    Belgium, Namur
    Posts
    1,864
    Quote Originally Posted by nachthymnen View Post
    NB is stock cooled?
    yes , i can bench @ 660 mhz fsb with stock cooling
    ***** Visit us on PCWorld.fr *****

  20. #20
    Master of nebulah frost
    Join Date
    Dec 2004
    Location
    Dolomites(Italy)
    Posts
    2,238
    Quote Originally Posted by Pt1t View Post
    yes , i can bench @ 660 mhz fsb with stock cooling
    Super!!!

    Hey, tks for the PVT info, I've ordered 1 now with 2GB of Ballistix tracer 8500.
    Battlefield 3: Nachthymnen666

  21. #21
    Xtreme Member
    Join Date
    Mar 2006
    Posts
    103
    nice results!!!

  22. #22
    approaching aphelion
    Join Date
    Nov 2005
    Location
    Aix-en-Pce | France
    Posts
    1,616
    You're a badly lucky guy Thomas!
    Best Regards,
    Xavier


    "I prefer to fly alone... when alone, I perform those little coups of audacity which amuse me..." Col. René Fonck (1894-1953), the Ace of Aces.

  23. #23
    Xtreme Enthusiast
    Join Date
    Apr 2007
    Location
    Germany
    Posts
    568
    Very nice... cant wait to test a 8600 on a RE Board.... plz try LN2 with this CPU.... maybe CB is very low, so you can push it to -140°C and go for more Voltge

  24. #24
    Xtreme X.I.P
    Join Date
    Mar 2005
    Location
    Belgium, Namur
    Posts
    1,864
    For LN2 , I ordered LN2 dewar 3weeks ago ... and yesterday i received a mail from the company saying that they cant deliver me until 20 august.

    After that , i promise to bench every days with ln2
    ***** Visit us on PCWorld.fr *****

  25. #25
    Xtreme Member
    Join Date
    Aug 2007
    Location
    UK
    Posts
    247
    All these E8600's are clocking nice results for cascade.

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •